SOONSUN Waterproof Case for GoPro Hero 13 12 11 10 9 Black
Quick take
This SOONSUN waterproof housing is designed for GoPro HERO13 Black, HERO12 Black, HERO11 Black, HERO10 Black, and HERO9 Black, with a waterproof claim down to 60m (196ft) and a large flat glass lens for sharp results above and below the surface. The built-in dual cold shoe mounts make it convenient to attach a dive light and an external microphone, but you will want to double-check compatibility with your specific cold-shoe accessories.
Pros and cons
Pros
- Designed for GoPro HERO9 to HERO13 Black models (not for Hero Mini or Hero Tiny).
- 60m (196ft) waterproof claim using PMMA, tempered glass, a sealing ring, and a tight buckle.
- Rust-resistant hardware, with buttons and screws made from 316 stainless steel.
- Built-in dual cold shoe mounting for adding a light and a microphone without extra adapters.
Cons
- Cold-shoe accessory fit may not be universal, and some specific cold shoe types may not mount as expected.
- Audio recording support is not included in the housing, so you will likely rely on your external microphone setup.
- Large flat lens helps image sharpness, but you should still expect underwater shooting to require good lighting and settings.
What buyers think
Buyer-review evidence is limited, but the available feedback points to a few consistent themes. Several users report that the case fits properly for their specific GoPro model and feel the housing design and seal are solid. A recurring positive takeaway is the value of having mounting points for underwater lights, which helps improve night or low-light recordings when paired with appropriate gear. There is also at least one mention that a certain cold shoe accessory arrangement did not fit cleanly, suggesting that accessory compatibility can be a practical gotcha depending on what you plan to attach.
What this housing is for
The SOONSUN waterproof case is built for underwater use with GoPro HERO9 through HERO13 Black. If you are going scuba diving, snorkeling, deep-sea exploring, or just want a protected GoPro for water activities, this is a housing-first solution that focuses on waterproof protection and easy accessory mounting.
Key features that affect underwater shooting
Water resistance up to 60m (196ft)
The housing is rated for waterproof use down to 196ft (60m), using PMMA construction, ultra-thick tempered glass, a sealing ring, and a tight buckle. For buyers, the practical takeaway is that the case is intended for more than casual splashes, including deeper dives.
Large flat glass lens for image sharpness
The front uses a large flat glass lens, which is meant to preserve image sharpness above and below water. The back LCD screen remains accessible so you can frame shots and review settings without removing the camera.
Rustproof stainless steel hardware
All buttons and screws are made from 316 stainless steel. That matters for long-term reliability in saltwater environments, where non-stainless fasteners can corrode over time.
Dual cold shoe mounts for light and microphone
The standout convenience feature is the built-in dual cold shoe mount area (top and left side). That gives you a straightforward way to mount a video light and attach an external microphone, and it also supports both horizontal and vertical shooting setups.
The package includes two cold shoe adapters (2-finger and 3-finger) plus the waterproof case and mounting hardware. If you already own dive lights or microphones with standard cold shoe designs, this can reduce the amount of extra gear you need to carry.
Compatibility and fit you should confirm first
This housing is compatible with GoPro HERO13 Black, HERO12 Black, HERO11 Black, HERO10 Black, and HERO9 Black. It is not fit for GoPro Hero Mini or HERO Tiny. If you own a different GoPro variant, this case will not be the right match.
You should also sanity-check your planned accessory setup. If you have a specific light or microphone already, confirm that its cold shoe type aligns with the adapters provided and the mount layout on the housing.
Pros and cons summary
- Best for: GoPro HERO9 to HERO13 Black owners who want an underwater-ready housing with a clear path to adding a dive light and external audio gear.
- Who should consider a different option: buyers using GoPro Hero Mini or Hero Tiny, or anyone who needs guaranteed universal compatibility with a very specific cold-shoe accessory design.
- Main tradeoff: the case is feature-rich for lighting and mounting, but accessory fit can be the deciding factor, so it is worth checking what you plan to attach before buying.
Price and availability
The listing shows a current price that is significantly lower than the list price, and the item is marked in stock for US buyers. If you are ready to purchase, compare the delivered bundle contents and ensure you are getting the exact HERO model compatibility you need.
Verdict
If you shoot with a GoPro HERO9 to HERO13 Black and want a waterproof housing built for deeper water, the SOONSUN case is a strong fit. The combination of a 60m/196ft waterproof claim, rust-resistant stainless hardware, and built-in dual cold shoe mounting makes it a practical option for divers who want to add lights and an external microphone. The main thing to watch is compatibility with your specific cold-shoe accessories, since fit can vary.
FAQs
Is this waterproof case compatible with GoPro HERO13 Black?
Yes. It is designed to work with GoPro HERO13 Black (along with HERO12 Black, HERO11 Black, HERO10 Black, and HERO9 Black).
How deep is the SOONSUN waterproof case rated for?
It is rated for waterproof use down to 196ft (60m).
Can I mount an underwater light and microphone to this housing?
Yes. It includes built-in dual cold shoe mounting points and comes with 2-finger and 3-finger cold shoe adapters to help connect compatible devices.
Does this housing support audio recording on its own?
No. The setup is intended for external audio solutions, such as a microphone mounted using the cold shoe system.
Does it fit gopro hero mini or hero tiny?
No. It is not designed for GoPro Hero Mini or Hero Tiny.
Is the cold shoe mount compatible with all lights and microphones?
Cold shoe mounts are widely used, but fit can depend on the exact accessory design. There is at least some indication that certain cold shoe configurations may not mount smoothly, so it is smart to verify compatibility with the adapters provided.
Specifications
| Product Title | SOONSUN Waterproof Case for GoPro Hero 13 12 11 10 9 Black,196FT/60M Underwater Protective Diving Housing with Accessories, Built-in Dual Cold Shoe Mount to Connect Video Light and Microphone |
|---|---|
| Category | Electronics > Camera & Photo > Underwater Photography > Housings |
| Brand | SOONSUN |
| Manufacturer | SOONSUN |
| Model Number | GPO-9017 |
| Video Capture Resolution | 5.3K |
| Color | Waterproof Case for Hero 13/12/11/10/9 Black |
| Material | Acrylic, Glass, Stainless Steel |
| Item Weight | 0.16 Kilograms |
| Water Resistance Level | Waterproof |
| Enclosure Material | Acrylic, Glass, Stainless Steel |
| Video Capture Format | MP4 |
| Compatible Devices | For GoPro HERO 10 Black, For GoPro HERO 11 Black, For GoPro HERO 9 Black |
| Audio Recording | No |
| Exposure Control Type | Automatic (Auto) |
| File Format | MP4 |
| Media Type | ProductImage |
| Viewfinder Type | LCD screen |
| Item Dimensions D x W x H | 1.97"D x 3.3"W x 3.54"H |
| Mounting Type | Quick Release Mount |
| Compatible Camcorder Models | GoPro HERO10 Black, GoPro HERO11 Black, GoPro HERO12 Black, GoPro HERO9 Black |
| Camera Model Compatibility | GoPro HERO10 Black, GoPro HERO11 Black, GoPro HERO12 Black, GoPro HERO9 Black |
| UPC | 716670929755 |
| Manufacturer Part Number | GPO-9017 |
| Built-In Media | 2-finger cold shoe adapter x 1, 3-finger cold shoe adapter x 1, Waterproof housing case x 1, Mounting buckle x 1, Thumb screw x 1 |
Available variants
Color
- Waterproof Case for Hero 13/12/11/10/9 Black
- Waterproof Case+Filters for Hero 13 12 11 10 9
Recommended next
FitStill 263FT/80M Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black
The FitStill 263FT/80M underwater housing is built for GoPro HERO9 Black through HERO13 Black, using an aluminum alloy shell, stainless-steel hardware, and a large flat glass lens. It’s designed for serious water sports (up to 80m/263ft) with reported leak resistance, clear footage, and easy button access, with a couple of practical limitations to consider for audio and how the housing affects controls.
HONGDAK 196ft/60m Waterproof Housing Case for GoPro Hero 13 12 review
A budget-friendly underwater housing option for GoPro Hero 9 to 13 (Black), designed for clear shooting and rated to 60m/196ft. It includes a quick-release base mount, but the tight seal and hinge/closure feel can be a tradeoff for frequent use.
FitStill 148FT/45M Waterproof Housing for Go Pro Hero 2018/7/6/5 Black
The FitStill 148FT/45M waterproof housing is built for GoPro Hero 5 Black, Hero 6 Black, Hero 7 Black, and the Hero 2018 model, adding a deeper-water, more protective shell plus a large flat lens area and anti-fog inserts. It can be a strong value for swimmers and divers, with the main caveat that it is not for Hero 7 Silver/White, and fogging depends on proper anti-fog use and handling.
TELESIN Waterproof Case Combo for Action 6 Underwater Housing Shell review
The TELESIN Waterproof Case Combo is a purpose-built underwater housing for DJI Osmo Action 6, paired with a floating stick and quick-release mounting parts. It’s designed for deep-water shooting up to 60m/196ft with a tempered-glass lens window for clear footage, while review themes highlight confident sealing and solid build. The main caution is buyer fit: it’s for Action 6, and some users report that add-on handling can impact buoyancy during deeper dives.