SEAVIEW Direct Radar Mount Angled Wedge
Quick take
The SEAVIEW Direct Radar Mount Angled Wedge is a direct-mount angled spacer designed to set your radar at a 4° downward tilt (below horizontal). It is intended for boat radar installs where you want improved detection geometry but need a simpler, pre-drilled solution instead of custom fabrication.
It should fit buyers who have one of the supported radar brands and want an angled wedge that installs underneath the radar. The main caveat is that it is a wedge for specific radar mounting patterns, so getting the correct compatibility matters.
Pros and cons
Pros
- Provides a fixed 4° angle below horizontal to help optimize radar detection geometry.
- Pre-drilled for major radar brands (including Garmin, Raymarine, Simrad, Furuno) to reduce guesswork.
- Marine-grade polymer construction (King Starboard marine-grade polymer or injection-molded ASA plastic, RW42 model) built for saltwater, UV, and harsh conditions.
- Designed as a direct-mount wedge that installs underneath the radar unit.
Cons
- It is not a universal mount, so you must match the pre-drilled pattern to your radar model.
- Only the angled wedge is included, so any radar hardware, wiring, or additional mounting components must come from your existing setup.
What buyers think
Buyer-review evidence is limited, but the available reports point to a consistent theme: the wedge is easy to work with and delivers the intended angle for real-world installations. Reviews mention a strong focus on fit, especially when mounting a radar dome in a constrained location, and note that the pre-drilled holes can also help act as a drilling template during installation. The overall sentiment in the limited sample is that installation is straightforward when the wedge matches the radar’s mounting pattern.
What this angled wedge does for your radar install
This wedge is designed to change the radar’s pointing angle by mounting the unit at 4° below the horizontal plane. In practice, that kind of downward tilt can help tailor coverage to what you care about most on the water, especially when a flat, perfectly horizontal mount is not possible due to deck layout, hardtop height, or other structural constraints.
Rather than requiring you to fabricate an angled bracket from scratch, the wedge is built as a direct-mount solution that sits underneath the radar unit and provides a repeatable angle across compatible installations.
Fit and compatibility: the part that matters most
The mount is pre-drilled to fit major radar brands, including Garmin, Raymarine, Simrad, Furuno, and more. This is a big deal for convenience, because the main value of a direct-mount wedge is reducing custom measuring and drilling.
That also means compatibility is your biggest checkpoint. If the mounting pattern does not match your specific radar model, you will likely need to stop and verify fit before proceeding.
Installation expectations
Installation is positioned around the pre-drilled holes for the radar model. Reviews from owners who used it in Raymarine radar setups describe a good fit and a straightforward process for achieving the needed angle in a hardtop-adjacent mount location. In those cases, the pre-drilled holes were also described as helpful for drilling additional holes accurately.
Because this is a wedge-only product, plan around the rest of your installation hardware. You are responsible for the radar mounting approach for your specific boat structure, as well as any fasteners or components that are not part of the wedge.
Build quality and marine durability
For corrosion and long-term weathering, the wedge is constructed from marine-grade polymer (King Starboard marine-grade polymer) or injection-molded ASA plastic (RW42 model). These materials are chosen to withstand saltwater corrosion, UV exposure, and harsh marine conditions, which matters if your radar stays exposed or semi-exposed for extended seasons.
Who should buy it, and who should skip it
Best for
- Boat owners who need their radar tilted 4° downward but want a direct-mount, pre-drilled approach.
- Shoppers installing under a hardtop or in a layout where a higher, angled position improves sightline coverage.
- Buyers using a compatible radar brand and model with known mounting patterns.
Better alternatives if you want something else
- If you do not have a compatible radar mounting pattern, you may need a different wedge or an adjustable mounting solution rather than relying on a fixed-angle pre-drilled part.
- If your priority is adjustable fine-tuning beyond a fixed 4° tilt, you may prefer a mount style that allows more angle variation.
Verdict
The SEAVIEW Direct Radar Mount Angled Wedge is a practical, purpose-built solution for installs that need a 4° downward radar angle without custom fabrication. It earns value from its pre-drilled compatibility approach and marine-grade construction, but it will only be a smooth purchase if you confirm your radar model matches the wedge’s mounting pattern.
Price and availability
It is currently listed with an in-stock status. For the most up-to-date pricing, use the button below.
FAQ
Will this wedge fit my radar model?
The wedge is pre-drilled for major radar brands (including Garmin, Raymarine, Simrad, Furuno). Fit depends on matching your specific radar model’s mounting pattern, so you should confirm compatibility before ordering.
What angle does it set the radar at?
It is designed to mount your radar 4° below the horizontal plane.
Is it easy to install?
Installation is intended to be straightforward because it includes pre-drilled mounting holes for compatible radar models. Reviews describe the wedge as fitting well and helping with drilling/positioning during installation.
Is the wedge the only item included?
Yes. The package includes the direct mount angled wedge only.
What material is it made from?
It uses marine-grade polymer (King Starboard marine-grade polymer) or injection-molded ASA plastic (RW42 model), intended to withstand saltwater corrosion and UV exposure.
Specifications
| Product Title | SEAVIEW Direct Radar Mount Angled Wedge | 4° Angle Below Horizontal for Improved Radar Performance | Pre-drilled for Major Radar Brands | Marine-Grade Polymer Construction |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Radar Systems |
| Brand | SeaView |
| Manufacturer | SEAVIEW |
| Model Number | RW4-3 |
| Item Weight | 3.5 Pounds |
| UPC | 627993470735 839662002073 888357938203 775506058168 |
| Global Trade Identification Number | 00839662002073 |
| Mfr Part Number | RW4-3 |
| Built-In Media | Radar Wedge |
| Unit Count | 1.0 Count |
| Item Type Name | Radar Wedge, 4, Open Array, Most Mfgs. |
| Warranty Description | Manufacturer Limited |
| Number of Items | 1 |
Available variants
Color
- No Color
- White
Style
- RW47
- RW43
- RW41
Recommended next
Lowrance Halo 20+ Radar, Black, One Size (000-14542-001)
The Lowrance Halo 20+ is a compact, 20-inch dome radar built for fast, near-real-time collision avoidance. With high-speed rotation, VelocityTrack Doppler target insights, and dual-range coverage, it can be a strong upgrade for boaters using compatible Lowrance MFDs, with one key requirement: plan for Point-1 GPS/compass integration for map overlay features.
Furuno 1815 8.4 Color LCD RA Radar (19" 4kW Dome)
The Furuno 1815 is a standalone marine radar package built around an 8.4-inch color LCD and a low-profile 19-inch 4 kW radome antenna. It emphasizes easy setup, quick readability with true-color style viewing modes, and Fast Target Tracking for up to 10 tracked targets (speed and course vectors shown quickly). It can also expand to AIS target tracking when paired with a Furuno AIS system.
Furuno USA DRS4W Furuno 1st Watch Wireless Radar
The Furuno USA DRS4W is a wireless, cockpit-friendly radar option built around a 19-inch radome and remote viewing via an iPhone or iPad app. Buyers highlight the space-saving installation and simple app display, but there are notable feature limitations for collision-course/EBL expectations and rain-clutter behavior. It is best for boaters who want flexible placement and basic situational awareness from a mobile display, not for everyone needing advanced target tools or universal regional compatibility.
Scanstrut APT-150-01 Aluminum Powertower for Radomes, Open Array, and Small SatCom/TV Antenna - 6"
The Scanstrut APT-150-01 is a 6-inch marine aluminum powertower designed to mount radar radomes, open array antennas, and small SatCom/TV antennas with a built-in wedge angle for improved performance and a cleaner look than hard-top mounting. It’s generally praised for build quality and fitment, but internal cable routing may not match every radar model, so check your specific antenna cable path before buying.