Scanstrut APT-150-01 Aluminum Powertower for Radomes, Open Array, and Small SatCom/TV Antenna - 6"
Quick take
The Scanstrut APT-150-01 is a 6-inch aluminum powertower built to give radar and small SatCom/TV antennas a cleaner, more intentional installation. Buyers often highlight its solid construction and that the built-in wedge helps achieve the needed angle without looking improvised. The main buying caveat is compatibility for internal cable routing, since some radar models may still require external cable management.
Pros and cons
Pros
- Solid aluminum build with a finished look that can be preferable to direct hard-top mounting.
- Built-in wedge angle is designed to help achieve the right tilt for installation.
- Includes inserts intended to fit cables from major radome/antenna families.
- Supports internal mounting with a Scanstrut DS30 cable seal, aiming to simplify cable entry.
Cons
- Internal cable routing may not work with every antenna design, even when mounting bolt holes align.
- Requires careful planning if you want a fully sealed, internal cable path, especially with specific radar models.
What buyers think
Buyer feedback is limited but points to a consistent theme: the APT-150-01 is valued for workmanship, fit, and a more polished appearance once installed. Several owners mention the wedge/angle is a key part of why the mount is useful, making radar upgrades feel cleaner and more integrated. At the same time, review evidence includes at least one compatibility concern where internal cable routing did not match a particular radar’s internal cable path, leading to a need for external cable work and added concern about water entry if the top is left exposed. Overall, the sentiment is positive on build and aesthetics, but buyer-review evidence is not broad enough to guarantee internal routing will work for every radome or antenna model.
What this mount is for
The Scanstrut APT-150-01 is a universal-fit-style marine powertower intended for radomes, open array antennas, and small SatCom/TV antennas, with a 6-inch tower height. It’s designed to help you mount the antenna at a controlled angle and create a more finished installation compared with mounting directly to the hardtop or using ad hoc supports.
Design highlights that affect daily use
Built-in angle and a cleaner install
Multiple buyers call out that the built-in wedge angle is part of the value. Practically, that means you are less likely to need to fabricate an angle solution just to get the antenna positioned correctly.
Internal cable entry and DS30 cable seal
The mount uses an internally mounted Scanstrut DS30 cable seal, and it is described as requiring no marine sealant. It is also positioned as a design that avoids cutting the cable when removing plugs. If your antenna’s cable route lines up with the powertower’s cable path, internal routing can help keep the installation tidy.
Included inserts for different cable entry needs
Inserts are included to fit cables from major radomes. This can reduce the hassle of sourcing adapters or trying to force-fit cable glands for your specific antenna.
Pros and cons for different buyers
Best for
- Boat owners upgrading radar or small SatCom/TV antennas who want a more integrated look than a direct hard-top mount.
- Installers who prefer a controlled mounting angle provided by the powertower design.
- Buyers whose antenna cable routing is compatible with internal entry through the powertower.
Consider before you buy
- If you are planning a specific radar model, double-check whether its cable path and connector layout will align with the powertower’s internal routing. Some installations may still end up with visible external cabling.
- If “fully internal, sealed routing” is non-negotiable for your setup, you may want to confirm compatibility details before committing.
Compatibility and fit: what to verify
“Universal fit” style products can still vary in how internal cable routing behaves, even when bolt holes line up. Before purchasing, compare your antenna’s cable route to the powertower’s cable entry approach. If your antenna design has a cable path that does not line up with the mount’s internal route, you could face extra work or a less tidy result.
Price and availability
The Scanstrut APT-150-01 is currently listed with an advertised price point and shows as in stock. For the latest pricing and purchase options, check the live listing.
Verdict
The Scanstrut APT-150-01 is a strong choice for buyers who want a clean, angular marine antenna installation and appreciate solid aluminum construction. Where it can fall short is internal cable routing compatibility with specific radar/antenna designs. If you verify that your antenna’s cable route aligns with the powertower’s internal entry plan, you are likely to get the polished, easy-to-integrate result that many buyers are looking for.
FAQs
Can I route cables internally with this powertower?
It is designed to support internal cable entry using a Scanstrut DS30 cable seal. However, internal routing compatibility can depend on how your specific antenna routes its cable internally, so it is worth confirming alignment with your radar or antenna model before installing.
Do I need to cut the antenna cable when installing or removing plugs?
The mount is designed so you do not need to cut the cable to remove plugs, which can make service or future changes easier.
What antenna types does the APT-150-01 support?
It is intended for radar radomes, open array antennas, and small SatCom/TV antennas, with a universal-fit approach and included cable inserts.
Is this mount good for improving the antenna angle?
Yes, it includes a built-in wedge/angle feature that several buyers mention as a key reason they chose the mount.
Does it require marine sealant?
The mount is described as not requiring marine sealant for installation, as part of its sealing approach.
Is it compatible with Garmin radars?
Some installations may fit well mechanically, but internal cable routing may not match every Garmin radar design. If you have a specific Garmin model, check that its cable path will align with the powertower’s internal routing.
Specifications
| Product Title | Scanstrut APT-150-01 Aluminum Powertower for Radomes, Open Array, and Small SatCom/TV Antenna - 6" |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Radar Systems |
| Brand | Scanstrut |
| Manufacturer | powersports-equipment |
| Model Number | APT-150-01 |
| Color | No Color |
| Item Weight | 4.4 Pounds |
| AntennaDescription | Television |
| Global Trade Identification Number | 05060114795402 |
| Number of Items | 1 |
| Mfr Part Number | APT-150-01 |
| Built-In Media | Scanstrut APT-150-01 Aluminum Powertower for Radomes, Open Array, and Small SatCom/TV Antenna - 6" |
| Warranty Description | Warranty |
| Item Type Name | Scanstrut APT-150-01 Aluminum Powertower for Radomes, Open Array, and Small SatCom/TV Antenna - 6" |
| Unit Count | 1.0 Count |
| Antenna | Television |
Recommended next
Raymarine ST4000MK2 Wheel Drive OnlyNot A Complete Pilot
Raymarine ST4000MK2 Wheel Drive is a wheel-drive autopilot motor meant to replace an existing ST4000MK2 drive. It can be a straightforward swap for matching systems, but it is not a complete autopilot kit, so you need the compatible control head and existing installation to make it work. Buyers tend to like the exact-fit replacement experience, while the main drawback is cost versus doing a simple motor-only replacement.
Raymarine i60 Wind System with Masthead
The Raymarine i60 Wind System with Masthead is a dedicated sailboat wind instrument designed to show wind speed and direction (including Beaufort, max wind, VMG, and tack) and can integrate with other Raymarine instruments for apparent and true wind. Strong buyer feedback highlights easy integration and readable display, with the main caveat being that wind transducer performance can be sensitive to water exposure at the masthead.
Simrad GO Chartplotter and Fish Finder, with Transducer and Radar Options, Preloaded C-MAP Discover Chart Card
The Simrad GO9 XSE bundle pairs a 9-inch multifunction display with an 83/200 kHz HDI transducer package and a Halo20 solid-state radar option. It is a strong all-in-one choice for boaters who want chartplotting, CHIRP/DownScan-style structure viewing, and radar overlay in one touchscreen system, with NMEA 2000 integration and wireless mirroring. The main caveat is that some buyers report bundle completeness or installation-related issues, so plan for proper setup and verify what cables and media come in the box for your install.
Furuno 1815 8.4 Color LCD RA Radar (19" 4kW Dome)
The Furuno 1815 is a standalone marine radar package built around an 8.4-inch color LCD and a low-profile 19-inch 4 kW radome antenna. It emphasizes easy setup, quick readability with true-color style viewing modes, and Fast Target Tracking for up to 10 tracked targets (speed and course vectors shown quickly). It can also expand to AIS target tracking when paired with a Furuno AIS system.