ROCKBROS Out Front Mount Compatible with Garmin, iGPSPORT
Quick take
The ROCKBROS out-front mount positions compatible Garmin or iGPSPORT cycling computers (and other small electronics) further forward so you can check data without taking your eyes too far off the road. It is made from nylon, is lightweight, and is intended for handlebar sizes between 1.26 and 1.38 inches (32 to 35 mm). The main caveat is that installation can take more effort than hinged clamp designs, and a small number of buyers report hardware or machining problems.
Pros and cons
Pros
- Designed for out-front positioning, helping keep your computer in your forward line of sight.
- Compatibility target is clear: Garmin and iGPSPORT cycling computers, plus handlebar diameter 32 to 35 mm.
- Lightweight nylon build (about 1.6 oz / 45 g) for minimal added feel.
- Includes a wrench and multiple accessories/adapters for setup across compatible devices.
Cons
- Installation may require more tinkering than some competing clamp styles, and it is not a hinged design.
- Build/hardware quality concerns have been raised by some buyers, including stripping or nut-placement frustration.
What buyers think
Buyer feedback is mixed, but several recurring themes show up. Many riders like the idea of using it as a more permanent installation, and they report it works well once set. Others find it comparable to OEM-style performance in how it attaches and holds the device. Overall, the review evidence suggests the mount can be solid for day-to-day use, but installation experience and hardware quality can vary.
Who this mount is best for
This out-front mount is a good fit if you want your cycling computer higher and more forward, so your gaze stays closer to the road while you check data. It is especially relevant for riders using a compatible Garmin or iGPSPORT head unit and running handlebars in the 1.26 to 1.38 inch (32 to 35 mm) range.
Who should skip it
Consider alternatives if you frequently swap computers between bikes, since some buyers describe the setup as requiring more tinkering than simpler clamp designs. Also skip it if you are very sensitive to hardware tolerances, since a portion of buyer feedback includes problems during installation.
Compatibility and fit notes
The mount is intended for bike handlebar mounting (not a stem overlay) and targets handlebar diameters of 32 to 35 mm (1.26 to 1.38 inches). It is marketed for Garmin and iGPSPORT cycling computers. The package includes adapters and mounting hardware (including a wrench and multiple screws/washers), which suggests there is some flexibility in how the computer interfaces with the bracket system.
Design and day-to-day usability
The key design goal is out-front visibility. Instead of keeping your computer directly in line with the bars, the mount places the device forward, which can make frequent glances less disruptive. The clamp is nylon and is lightweight, which helps reduce added mass on the handlebar area. Buyers who treat it as a “set it and leave it” mount tend to be happier, likely because you do not have to repeat the installation effort often.
Installation difficulty, and why it matters
Installation is where buyer experiences diverge. Some riders report it attaches and works smoothly, while other feedback highlights a non-hinged clamp approach that can be trickier to align. That matters because a bike computer mount is a safety-of-position item, meaning you want a secure fit without stripped hardware or repeated tightening attempts.
Pros and cons recap
- Best for: Riders using Garmin or iGPSPORT cycling computers who want a forward, out-front viewing position on 32 to 35 mm handlebars.
- Tradeoff: Expect more effort than hinged clamp designs, and be mindful of installation hardware quality.
- Value angle: Buyers who want an affordable mounting solution that looks good and holds the device once installed may find it appealing.
Price and availability
The current price can change frequently, so it is worth checking the latest listing details before ordering. Availability is listed as in stock in the US market at the time of review.
Alternatives to consider (how to choose)
If you want a different approach, compare mounts using these criteria rather than focusing on brand alone:
- Clamping style: Hinged clamp designs are often faster to install and easier to align.
- Computer compatibility: Confirm the mount supports your exact Garmin or iGPSPORT model.
- Handlebar diameter range: Make sure 32 to 35 mm is correct for your bars.
- Out-front geometry: Decide how far forward you want your computer for visibility versus cockpit tightness.
Verdict
The ROCKBROS out-front mount is a lightweight, straightforward way to push a compatible Garmin or iGPSPORT cycling computer forward for easier forward visibility on the bike. It can work well for riders who plan to keep the mount on one bike, but installation can be more fiddly than hinged clamp options, and build/hardware issues have been reported. If your priority is out-front positioning and you are comfortable taking your time during setup, it is a reasonable option to consider.
FAQs
Is this mount compatible with Garmin and iGPSPORT bike computers?
It is designed for Garmin and iGPSPORT cycling computers. The mount also includes adapters and mounting hardware to help match the compatible interface.
What handlebar size does this mount fit?
It is intended for handlebars between 1.26 and 1.38 inches (32 to 35 mm) in diameter.
Does it mount above or below the handlebar?
It can be installed above or below according to your preference.
Is the installation process quick?
Some buyers describe the installation as requiring tinkering, and the clamp design is not hinged, so alignment can take extra time compared with simpler clamp styles.
Is it a good choice if I move my computer between bikes?
If you frequently swap setups, you may want a faster-to-install mount. Review feedback suggests this one can be better suited for a more permanent installation.
Specifications
| Product Title | ROCKBROS Out Front Mount Compatible with Garmin, iGPSPORT - Bike Handlebar 1.26’’-1.38’’/ 32-35mm |
|---|---|
| Category | Electronics > GPS, Finders & Accessories > GPS System Accessories > Vehicle Mounts |
| Brand | ROCKBROS |
| Manufacturer | ROCKBROS |
| Model Number | 29210012001 |
| Color | Black |
| Material | Nylon |
| Item Weight | 0.06 Kilograms |
| Brand Name | ROCKBROS |
| Manufacturer Warranty Description | 1 Year |
| Included Components | Adapter*2, Bracket Support*1, Out front Mount*1, Screws*7, Wrench*2, Washer*2 |
| Item Type Name | Out Front Bike Mount |
| Item Dimensions | 4.72 x 1 x 4.72 inches |
| Material Type | Nylon |
| Mounting Type | Bar Mount |
| Item dimensions L x W x H | 4.72 x 1 x 4.72 inches |
Recommended next
Garmin 010-10908-02 Portable Friction Mount
The Garmin 010-10908-02 is a portable dash friction mount designed to hold compatible Garmin nüvi and StreetPilot devices securely on stable surfaces. It focuses on quick in-and-out mounting, adjustable viewing angles, and a grip-on-dash approach that avoids common windshield suction issues.
95mm Adhesive Dashboard Pad Mounting Disk with Adhesive for Suction (2-Pack)
This 95mm adhesive dashboard mounting pad lets you turn a suction-cup phone or Garmin mount into a more stable dashboard setup. It’s designed to work with textured or less-flat dash surfaces by creating a smooth, even landing area for suction, but the adhesive disks are intended for one-time use once removed.
Miracase Phone Holders for Your Car with Metal Hook Clip, Air Vent Cell Phone Stand Car Mount, Dark Black
The Miracase air-vent phone mount uses a metal hook and clamp arms to hold phones securely while you drive. It’s designed for most phones from 4.0 to 7.2 inches (including thicker cases) and supports 360-degree rotation for portrait or landscape viewing. The main caveat is compatibility: it fits horizontal and vertical air vents (not round vents), and the vent blade width needs to be under about 1.4 inches.
RAM MOUNTS Tough-Claw Small Clamp Mount Base – B Size 1" Ball, Fits 0.625"-1.14" Rails (RAP-B-400U)
The RAM MOUNTS Tough-Claw Small Clamp Mount Base (RAP-B-400U) is a compact clamp-on mounting base built for odd-shaped rails and bars. It’s designed to quickly attach to rails in the 0.625" to 1.14" range and pair with RAM 1" B-size ball components, making it a strong fit for phones, tablets, action cameras, and rod-holder style setups. The main tradeoff to consider is that the clamp can take a bit of effort to open wide enough on larger-diameter tubes.