RIVECO 2 Pieces 1U Rack Shelves 19” Tray Cabinet Mount Vented Cantilevers for Network Equipment (14" Depth)
Quick take
RIVECO’s 1U vented cantilever rack shelves are built for 19-inch racks and cabinets and come as a two-piece set for mounting servers, network gear, or AV equipment. The tray design uses vent holes to support airflow, and the steel construction plus powder coat aims to resist scratching and rust. The main caveat: because one set reportedly arrived bent, check the shelves closely on arrival, especially if you’re counting on clean, aligned mounting holes.
Pros and cons
Pros
- Vented cantilever tray design for better airflow around mounted equipment.
- Steel build with a powder-coated black finish to help resist rust and scratching.
- Fits standard 19-inch racks and cabinets, sized for equipment width under 19 inches.
- Includes mounting screws and cage nuts, designed to install quickly.
Cons
- Receiving condition can be a risk, with at least one report of a bent shelf requiring extra effort to mount.
- Only suitable for 1U mounting, so it will not work for 2U or other rack heights.
- Depth is fixed at 14 inches, so it may not fit setups needing shallower or deeper trays.
What buyers think
Buyer-review evidence is broadly positive for functionality after installation. Multiple comments describe the shelves as easy to use once mounted and effective for organizing gear while allowing air to flow through the vent openings. There is also praise for durability in the real-world use cases mentioned (including use in a trailer environment). Overall, the feedback suggests the product works as intended for rack mounting, with receiving-condition being the main practical caveat.
What these rack shelves are for
These RIVECO cantilever tray shelves are made to slide into and support equipment mounted in a 19-inch rack or cabinet. Because they’re rated as 1U units, they’re best when you want to gain practical surface space for items like network gear, typical server components, or studio and audio rack equipment without taking up extra rack height.
Key specs that matter for shopping
Size and fit
- Form factor: 1U rack shelf (height listed at 1.78").
- Rack compatibility: designed for standard 19-inch racks and cabinets.
- Depth: 14" (13.8" listed), which is a common middle ground for network gear and short-depth appliances.
- Quantity: 2 shelves per set (two pieces included).
Material and finish
- Material: SPCC cold-rolled steel (listed as alloy steel), intended for load-bearing support.
- Thickness: 2.0 mm.
- Finish: black powder coating (RAL9005 noted), intended to resist scratching and rusting.
Airflow and equipment cooling
The trays are vented with openings intended to help heat dissipate around mounted equipment. If your devices depend on side or front airflow (common with many network appliances and some servers), the vented design is a straightforward reason to choose a tray over a solid platform.
Weight capacity
A maximum weight of 50 pounds is listed. If you are mounting heavier units, keep in mind that your equipment plus any cables and accessories should stay within that limit for the shelf.
Installation and day-to-day usability
These shelves are described as designed for straightforward mounting, and the set includes mounting screws and cage nuts. That matters because it reduces the need to source extra hardware for typical rack rail or cabinet mounting patterns. They are also positioned as cantilever trays, so you’re essentially creating a stable shelf surface for your equipment while still benefiting from the vented opening pattern.
Pros and cons in plain terms
When this shelf is a smart buy
- You have a 19-inch rack and need a 1U solution for mounting network equipment, servers, or studio/AV gear.
- You want airflow-friendly support, not a solid shelf that can trap heat.
- You prefer a kit that includes basic mounting hardware (screws and cage nuts).
When you should look elsewhere
- Your rack needs a different height than 1U (for example, 2U), or your layout requires a different tray depth than 14 inches.
- Your equipment is sensitive to mounting alignment, and you cannot afford extra time for adjustments in the event of a bent arrival.
Verdict
The RIVECO 1U vented rack shelves are a practical, airflow-oriented way to add mounting surface inside a 19-inch rack. The steel construction and powder coat are designed for everyday durability, and the included cage nuts and screws make installation simpler. If you do buy, the key buyer move is to inspect both shelves closely when they arrive, since receiving damage has been reported and could affect hole alignment and mounting ease.
FAQ
Are these rack shelves compatible with all 19-inch racks?
They’re intended for standard 19-inch racks and cabinets. As long as your rack uses typical 19-inch mounting rail spacing and you’re installing into a 1U space, they should be a straightforward fit.
What does “1U” mean for these shelves?
“1U” refers to the rack height the shelf occupies (listed at 1.78"). You’ll need to mount them in a rack space sized for 1U, not 2U or other heights.
How much depth do these shelves provide?
The shelf depth is listed as about 13.8" (14 inches). Make sure your equipment’s depth fits within that dimension and allows for cable routing.
Do the vent holes help with cooling?
Yes, these trays are vented, which is meant to promote airflow around mounted equipment. This can be helpful for devices that run warm and benefit from airflow.
Is the shelf strong enough for heavier network or server gear?
A maximum weight capacity of 50 pounds is listed for the shelf. Stay under that limit for your equipment and accessories, and verify compatibility with your rack hardware.
Specifications
| Product Title | RIVECO 2 Pieces 1U Rack Shelves 19” Tray Cabinet Mount Vented Cantilevers for Network Equipment Shelf Mounting, 14 Inches 35CM Depth, Black 2PCS |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Accessories & Peripherals > Racks & Cabinets |
| Brand | RIVECO |
| Manufacturer | RIVECO |
| Model Number | RP3502 |
| Item Weight | 10 Pounds |
| Product Dimensions | 13.8"D x 19"W x 1.78"H |
| Color | Black |
| Material | Alloy Steel |
| Size | 14 Inches |
| Warranty Description | 2 years |
| Item Type Name | Cantilever trays for racks and cabinets |
| Unit Count | 2.0 Count |
| Is Assembly Required | No |
| Item Dimensions D x W x H | 13.8"D x 19"W x 1.78"H |
| Compatible Devices | Server, audio rack, data rack, network rack, studio rack |
| Mounting Type | Rack Mount |
| Weight Capacity | Maximum weight: 50 Pounds |
| Enclosure Material | Alloy Steel |
Available variants
Size
- 14 Inches
- 16 Inches
- 10 Inches
Recommended next
NavePoint 22U Server Cabinet Wall Mount Rack Enclosure with Caster
The NavePoint 22U server cabinet is a steel, 22U rack enclosure built for 19-inch IT and A/V gear, with options for wall-mounting or floor use and mobility via caster wheels. Built-in fans and a lockable tempered glass door help with airflow and equipment security, but the included airflow can be loud, and you will want to plan for cable depth and grounding before assembly.
Tecmojo 6U Network Rack, 10 inch Mini Server Rack with 2 Side Translucent Panels & 2 Top Handles, 7.87 inch Deep, for 10 inch IT Equipment & A/V Devices, White
The Tecmojo 6U 10-inch mini rack is a compact way to organize home lab gear, network switches, and small IT or A/V components. Buyers generally like the sturdy steel frame, the easy assembly, and the open-frame airflow, with a key caveat: it is sized for small equipment and may limit future expansion.
ECHOGEAR 20U Open Frame Rack for Servers & AV Gear
The ECHOGEAR 20U open frame rack is a wall-mountable, alloy-steel option for organizing server and A/V gear with airflow built into the design. It ships with two vented shelves and mounting hardware, but it is not a closed cabinet, so you should plan your component fit and mounting hardware needs up front.
NavePoint 15U Server Cabinet Wall Mount Rack Enclosure with Caster
A sturdy 15U network cabinet built for 19-inch rack gear, with a locking tempered-glass door, removable side panels, and built-in fans. Best for home labs and small IT installs that need a neat, secure enclosure, but it is a bit depth- and airflow-sensitive (the included fans can be loud).