Replacement Side Door Battery Cover for GoPro, Dustproof Pass Through Battery Cover Lid with Type-C Charging Port
Quick take
This is a replacement GoPro side battery door made for Hero 9/10/11/12/13 Black. It keeps the battery covered while offering a Type-C pass-through so you can charge or connect without removing the door. The main caveat is access, some users report it can be difficult to open for fast battery or memory card changes, and it is not waterproof.
Pros and cons
Pros
- Designed for GoPro Hero 9/10/11/12/13 Black models
- Dust-resistant side cover with Type-C port for charging or connecting in-place
- Snap-in fit with a spring and rubber contact pad for secure battery seating
- ABS plastic build intended to be lightweight and durable
Cons
- Not waterproof, so it is not a good substitute for real water protection
- Frequent battery or card swaps may be slower or more difficult than with an original-style door
What buyers think
Buyer feedback is generally positive on fit and usability for common replacement scenarios. Multiple comments highlight a snug fit, simple installation, and better convenience for plugging in a charging or data cable through the side port. Some buyers specifically mention using the door after damage (for example, a broken latch after an accidental drop), with the replacement holding up for continued use.
At the same time, buyer-review evidence also points to one notable tradeoff: the door can be hard to open, especially if you need quick access to batteries or memory cards during a shoot. Where battery swapping is frequent, at least some reviewers felt it added friction and were concerned enough to consider returning it.
What this replacement door is for
This battery side door is a practical fix when your GoPro’s existing side cover is broken, loose, or no longer keeps the battery compartment properly closed. It is also useful if you prefer leaving the door on most of the time and using the Type-C pass-through for charging or connecting.
Compatibility and fit details
The door is made for GoPro Hero 9, 10, 11, 12, and 13 Black models. It is intended to swap in as a repair part for the side battery door area, and it uses a spring and rubber pad design to help keep the battery in good contact and the cover installed securely.
Type-C pass-through, dust cover, and real-world use
The key feature is the built-in Type-C port on the side door. That means you can charge or connect without fully removing the battery door, which can be handy for time-lapse setups, longer sessions, or workflow where you want minimal interruptions. The door also includes a dust-resistant cover approach to help keep the compartment protected from everyday debris.
One important limitation: this replacement door is not waterproof. If you shoot in wet conditions or need dependable water resistance, you will still need a proper protective solution appropriate for your environment.
Pros and cons for different shooting styles
Best for
- People with GoPro Hero 9 to 13 Black who need a replacement side battery cover
- Vlog, interview, time-lapse, or continuous recording where in-place charging is convenient
- Buyers who want a covered compartment with a Type-C connection point
Not ideal for
- Anyone who changes batteries or memory cards repeatedly during a single filming session and needs the fastest possible access
- Use cases that require waterproof protection from the side door (this is not waterproof)
Build and design notes
The cover is described as lightweight and durable ABS plastic, with a silicone rubber component to support battery contact. A built-in spring is part of the installation design, aiming for a secure snap-in feel. If you are replacing a broken latch or cover, the construction choices are geared toward everyday durability rather than specialized rugged sealing.
How to decide if it’s worth it
If your main problem is a broken or loose battery side door, this replacement is straightforward and generally well received for fit and function. It is also a strong pick if your charging and connection workflow benefits from the Type-C pass-through.
However, if your shooting style requires constant battery and card swaps, consider whether you can live with slower door access. The most consistent buyer complaint focuses on opening difficulty, which can matter as much as fit and port convenience.
Price and availability
Check current pricing and stock status before ordering, since replacement accessory costs can vary by seller and bundle options. Buy on Amazon
FAQ
Is this replacement side door compatible with GoPro Hero 9 through Hero 13 Black?
It is intended for GoPro Hero 9/10/11/12/13 Black action cameras.
Does the side door allow charging without removing the battery cover?
Yes. The design includes a Type-C port for charging or connecting with the door closed.
Is this door waterproof?
No. The door is not waterproof, so it should not be relied on for wet or submerged conditions.
Is it easy to open and close for frequent battery or memory card changes?
Some buyers report it can be harder to open than expected. If you swap batteries or cards often, this may slow you down.
Will it fit securely and keep the battery in contact?
The door uses a spring and high-density rubber pad concept to help maintain secure installation and good battery contact.
What should I do if my existing side cover is broken?
A replacement battery door like this is a repair option, especially if your current latch no longer keeps the compartment closed properly.
Specifications
| Product Title | Replacement Side Door Battery Cover for Gopro, Dustproof Pass Through Battery Cover Lid with Type-C Charging Port Repair Part Camera Accessories for Gopro Hero 9/10/11/12/13 Black |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Action Camera Accessories |
| Manufacturer | Generic |
| Item Weight | 0.317 ounces |
| Package Dimensions | 2.36 x 0.98 x 0.67 inches |
| Item model number | G9 SIDECOVER |
Recommended next
TELESIN Neck Mount SE 2.0 with Air Cushion, Adjustable Chest Strap
The TELESIN Neck Mount SE 2.0 is a body-worn POV mount designed for comfortable, hands-free first-person video. It includes a swivel that rotates the camera 90 degrees for quick horizontal-to-vertical switching, plus an air-cushion pad and an adjustable chest strap to help reduce bounce during moderate movement.
Luxebell Accessories Kit for AKASO EK5000 EK7000 4K WiFi Action Camera (14-in-1)
The Luxebell 14-in-1 action camera accessories kit is a bundle-style solution for AKASO EK5000/EK7000 owners who want more ways to shoot, from a chest harness and head strap to a floating grip and vehicle suction mount. Buyers generally like the variety and value, with a common tradeoff being that setup can feel a bit unintuitive until you learn the parts.
61 in 1 Action Camera Accessories Kit for GoPro Hero
The Appolab 61 in 1 Action Camera Accessories Kit is a budget-friendly way to add more viewpoints to an action camera setup. It includes core mounts like a chest harness, handlebar bike mount, selfie stick, suction/car mount, and floating grip for water sports, with a focus on adjustable, all-purpose use. The main tradeoff is that the kit is largely plastic, so it may be best for casual-to-moderate adventure use rather than heavy, rough handling.
Accessories Bundle for DJI Osmo Action 5 Pro/Action 4/3 Waterproof Case Diving Housing Silicone Case Glass Screen Protector Film Whole Kit 60E (Kit1 for DJI Osmo Action 5 Pro/4/3)
A big, starter-friendly bundle for DJI Osmo Action 5 Pro, Action 4, and Action 3, bundling a waterproof housing, silicone cover, glass screen protection, and a wide mix of mounts for diving and action sports. Best if you want lots of accessories in one kit, but it is not positioned as premium OEM quality, with several parts described as more budget materials.