K&F CONCEPT Waterproof Floating Hand Grip Compatible with GoPro Hero 13 12 11 10 9 8 Black, DJI Osmo Action 5 Pro/6/4/3/2
Quick take
The K&F CONCEPT floating hand grip is a simple, lightweight way to hold your action camera while you shoot water activities, with a floaty design meant to help you recover the camera if it gets loose. Buyers like the anti-slip feel and the added peace of mind from the lanyard, but some find the wrist strap threading and strap adjuster less straightforward than expected. It also includes a 1/4-inch screw hole for stabilizing on land with a tripod.
Pros and cons
Pros
- Floating design aimed at reducing the risk of losing your camera underwater
- Anti-slip textured handle for more confident grip in wet conditions
- Includes a lanyard for extra retention and peace of mind
- 1/4-inch screw hole lets you connect to a tripod for steadier land shots
- Broad compatibility with many GoPro models, plus DJI Osmo Action (with quick-release adapter where required)
Cons
- Wrist strap setup can be fiddly, and the strap adjuster may not feel secure to everyone
- Some buyers expected features (like quick-release style controls) that are not actually present
- Compatibility may depend on adapter use for certain non-GoPro cameras
What buyers think
Buyer-review evidence is limited but consistent on a few practical points. Most feedback highlights that the grip holds the camera securely enough for active water use and that the textured handle feels manageable when things are wet. Several buyers also mention it is easy to start using quickly out of the box, and they appreciate the floating behavior for diving, snorkeling, paddling, and similar activities. Where experiences vary, it is mainly around accessory handling, especially threading the included wrist strap through the grip and the feel of the strap adjuster during real-world use.
How this floating grip helps with water sports
If you film near or in the water, the biggest everyday problem is not waterproofing the camera, it is keeping the camera attached to you and recoverable if something slips. This grip is built around that use case. It uses a floaty, hand-held form factor along with an included anti-loss lanyard, and it adds a bright, eye-catching color design intended to make the camera easier to spot underwater if it ever separates.
Grip, comfort, and non-slip control
The handle features an anti-slip texture meant to improve grip in wet conditions. Buyers who film while moving around, such as during snorkeling, paddling, or diving, tend to value this kind of tactile control because it reduces the “shaky hold” feeling that can happen when your hands are wet or gloved. The grip is also described as lightweight and not bulky, which matters if you are carrying the camera for longer sessions.
Mounting and compatibility details to check before you buy
This is not a generic universal mount that works in every configuration. It is designed for action camera systems that match its mounting interface.
- GoPro compatibility: It is stated to work with GoPro HERO 13/12/11/10/9/8 Black, as well as HERO 5/4 Session.
- DJI Osmo Action compatibility: It fits DJI Osmo Action 5 Pro/6/4/3/2, but you may need a quick-release adapter depending on your setup.
- Insta360 compatibility: It is listed as compatible with Insta360 Ace/Ace Pro/Ace Pro 2 with a quick-release adapter.
- Other compatible cameras: It is also described as compatible with action cameras that use a two-prong interface.
On land, there is a practical 1/4-inch screw hole at the bottom, which lets you attach the grip to a tripod or similar stabilization setup.
Pros and cons, from a buyer decision standpoint
Who it’s best for
- Swimmers, divers, surfers, and paddlers who want a more secure handheld option around water
- Anyone who wants an easy way to reduce the “lost camera” risk when shooting in the ocean or pools
- GoPro owners and users of compatible DJI Osmo Action or Insta360 models who are comfortable using adapters if needed
Who should consider alternatives
- Buyers who hate any fiddly strap threading or prefer a simpler lanyard/retention system
- Shoppers who want quick-release style controls on the grip itself (some buyers expected more functional buttons)
- People whose camera system requires a specific adapter they do not already own
Verdict: is it worth it?
The K&F CONCEPT floating hand grip is a practical, accessory-level upgrade for action camera owners who regularly film in and around water. The floaty design, bright visibility concept, and anti-slip texture target the real friction points of water shooting. If you already have the right mount setup for your camera, it can be a straightforward addition. Just plan on spending a minute to get the included wrist strap positioned correctly, since that is where at least some buyers felt the experience was less intuitive.
Price and availability
Check current pricing and availability for the K&F CONCEPT floating hand grip via the button below, since action camera accessories can vary by retailer and listing at any given time.
FAQ
Is this floating hand grip only for GoPro cameras?
It is built for GoPro HERO 13/12/11/10/9/8 Black and HERO 5/4 Session, and it is also listed as compatible with DJI Osmo Action models and some Insta360 cameras. For certain non-GoPro setups, a quick-release adapter may be required, so confirm your specific camera mount compatibility before ordering.
Will it help if my camera falls off while shooting underwater?
The floaty design is intended to help keep the camera recoverable and easier to locate underwater, and it includes a lanyard for extra retention. That said, retention systems are not foolproof in every wave condition, so it is still wise to secure the camera properly and test your setup in calm water first.
Does it work with a tripod?
Yes. The bottom includes a 1/4-inch screw hole, which lets you connect it to a tripod or similar stabilization gear for land shots.
Is the wrist strap easy to attach?
It is included with the grip, but some buyers found threading and positioning the strap less straightforward than expected. If you want a faster, simpler retention setup, it may be worth comparing with alternatives that use a different strap or attachment mechanism.
What’s the main tradeoff with this kind of floating grip?
The main tradeoff is that you are adding a floating, handheld form factor for water recoverability and control. While that helps in the water, you may still need to manage strap hardware and verify adapter compatibility for certain cameras.
Specifications
| Product Title | K&F CONCEPT Waterproof Floating Hand Grip Compatible with GoPro Hero 13 12 11 10 9 8 Black, DJI Osmo Action 5 Pro/6/4/3/2, Anti-Slip Handle for Water Sports, Action Camera Handler Mount Accessories |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Action Camera Accessories |
| Brand | K&F CONCEPT |
| Manufacturer | Shenzhen Zhuo Er Photographic Equipment Co.,Ltd |
| Compatible Devices | Compatible with DJI Osmo Action 2/3/4/5 Pro/6(need to use with quick mount), Compatible with GoPro Hero 13/12/11/10/9/8 Black, Compatible with Insta360 Ace/Ace Pro/Ace Pro 2(need to use with quick mount), Compatible with action camera with Two-prong interface |
| Compatible Phone Models | Not Compatible |
| Mounting Type | Prong Mount |
| Additional Features | Lightweight |
| Unit Count | 1.0 Count |
| Enclosure Material | Plastic |
| UPC | 810209450595 |
| Mfr Part Number | KF12.0072 |
| Warranty Description | 1 Year |
| Built-In Media | 1x Anti-loss Lanyard, 1x Floating Hand Grip |
| Special Feature | Lightweight |
Recommended next
Insta360 2-in-1 Invisible Selfie Stick + Tripod, Aluminum Alloy Invisible
The Insta360 2-in-1 Invisible Selfie Stick + Tripod combines an extended selfie pole with a built-in tripod for hands-free framing. It is designed to disappear in 360 footage for “invisible” third-person shots, and its standard 1/4" mount makes it a practical accessory for compatible Insta360 action cameras.
Accessories Kit for Gopro Hero 13 12 11 10 9
A large all-in-one accessory bundle for GoPro Hero 13, 12, 11, 10, and 9 Black users, built around a waterproof housing, silicone protection, and screen protection plus a long list of mounts and carrying options. Best if you want variety fast for activities like biking, water sports, skiing, and more, with the main caveat that the waterproof housing and silicone case are specifically designed for the Hero 13/12/11/10/9 Black lineup.
Sametop Floating Handle Grip Floaty Stick Waterproof Handler Accessory (Green)
A compact floating hand grip for action cameras that helps prevent sinking in the water, improves steadier shooting versus handheld aiming, and doubles as a storage spot for small items. Best for GoPro and many other action camera users who film near water, but it is only a practical solution if you pair the grip with the right camera mount and buoyancy expectations for your exact setup.
Luxebell Accessories Kit for AKASO EK5000 EK7000 4K WiFi Action Camera (14-in-1)
The Luxebell 14-in-1 action camera accessories kit is a bundle-style solution for AKASO EK5000/EK7000 owners who want more ways to shoot, from a chest harness and head strap to a floating grip and vehicle suction mount. Buyers generally like the variety and value, with a common tradeoff being that setup can feel a bit unintuitive until you learn the parts.