PULUZ Dive Case for DJI Osmo Pocket 3 Waterproof Case
Quick take
The PULUZ Dive Case is a transparent waterproof housing made for the DJI Osmo Pocket 3, intended for underwater shooting up to 45m/147ft. It focuses on clear capture with a tempered-glass lens front and includes an anti-fog sheet, plus a housing control layout meant to keep operation straightforward in-water. The main caveat is that seal prep and proper closure matter a lot, and some buyers report leakage when setup was not fully aligned or maintained.
Pros and cons
Pros
- Tailor-made fit for DJI Osmo Pocket 3, with one-to-one control button layout for underwater operation
- Transparent tempered-glass lens front (tempered glass with high light transmittance, designed to preserve image quality)
- Waterproof housing rated up to 45m/147ft, marketed as waterproof, moistureproof, dustproof, and sandproof
- Includes an anti-fog sheet and a quick-release buckle base for rigging and setup
Cons
- Clear operation depends on proper sealing, lens prep (removing protective film), and anti-fog use, so setup mistakes can cause trouble
- Some buyers report glare from the plastic front or limited joystick accessibility through the housing design
- Water resistance performance is not uniformly reported, with at least one negative experience describing leakage during real-world use
What buyers think
Buyer-review evidence is mixed but helpful. Multiple reports describe the housing as solid and well-made, with good alignment of button cutouts and a tight closure that does not obviously degrade video image quality. Several buyers also highlight practical value for travel and water activities, noting the provided accessories are a workable starting point.
At the same time, the review evidence includes concerns that are relevant to waterproof reliability and image appearance. One negative report claims leakage occurred during kayaking after seeming fine in a sink test, and another buyer emphasizes that gasket cleaning and following instructions are important for preventing issues. There is also mention of potential glare from the plastic front and challenges around controlling the joystick through the housing.
Overall, buyer-review evidence suggests the case can work well for underwater outings, but success likely hinges on careful setup, seal maintenance, and managing how the transparent housing affects reflections and controls.
Key features and what they mean for underwater shooting
Transparent, tempered-glass lens front for clearer results
The case uses a tempered-glass lens for the front element, designed to keep light transmission high and maintain the camera’s original look as much as possible. The tempered lens is also positioned as a high-hardness option (marketed as greater than 9H) meant to resist scratches and everyday wear for underwater use.
Waterproof depth rating up to 45m/147ft
This housing is designed for diving and underwater sports, with a stated depth rating of 45m/147ft. It is marketed as waterproof and also protection-oriented for moisture, dust, and sand, which matters if you are switching between shore, boat, and dive conditions.
In-housing controls designed for the Pocket 3
A one-to-one control button layout is included to make underwater operation feel more direct. There is also a simplified operation approach compared with housings that hide most controls behind extra external mechanisms.
That said, review evidence includes at least one report that the joystick area is not fully controllable through the housing as expected. If your shooting style depends heavily on joystick-driven framing, plan for a learning curve, and consider how you will physically operate the camera through the external controls.
Anti-fog support and setup notes you should not skip
Fogging is a common underwater problem, and this case includes an anti-fog sheet. The setup guidance also calls out removing a protective film from the lens and ensuring the housing is properly sealed before each use.
In other words, the housing is not just “drop in and dive.” You will want to treat each dive like a new seal check and lens-prep step to maximize reliability.
Pros and cons in real buying terms
When this dive case is a strong fit
- You own a DJI Osmo Pocket 3 and want a dedicated waterproof housing instead of an improvised alternative
- You care about underwater clarity and want a tempered-glass front plus anti-fog support
- You plan snorkeling, diving, kayaking, or other water sports where you want physical protection as well as water resistance
Who should be careful or look at alternatives
- You are not comfortable with careful sealing and pre-dive prep (gasket seating, lens film removal, anti-fog installation)
- You expect perfect control of every on-camera function through the housing, especially the joystick workflow
- You want to avoid any risk of reflections or glare from a transparent plastic front, based on how you shoot
Verdict
The PULUZ Dive Case for DJI Osmo Pocket 3 is a purpose-built underwater housing with a clear, tempered-glass lens front, a 45m/147ft depth rating, and practical add-ons like an anti-fog sheet and quick-release base. It looks best for divers and water-sports shooters who will follow the sealing and lens-prep steps every time. If you rely heavily on joystick-style framing through the housing, or you tend to skip setup rituals, this may be a higher-risk match than more foolproof options.
Price and availability
Check the latest price and availability before buying, since costs can change frequently on marketplaces. Use the link below to view current listings.
FAQ
Is the PULUZ dive case compatible with the DJI Osmo Pocket 3?
Yes. The housing is designed specifically for the DJI Osmo Pocket 3.
How deep is the case rated for underwater use?
It is marketed with a maximum depth rating of 45m/147ft.
Does it include anything to help prevent fogging?
Yes. It includes an anti-fog sheet, and you should also follow the lens prep steps (including removing protective film) before use.
Will the case affect image quality underwater?
The lens front is designed to preserve image quality as much as possible through high light transmittance and a tempered-glass element. However, review evidence also includes mentions of potential glare, which can depend on lighting, angles, and how you frame shots.
What should I do to help avoid leaks?
Make sure the housing is properly sealed before each use, keep the gasket area clean, and follow the provided instructions for lens prep and anti-fog installation. If the seal is not seated correctly, leakage is the risk.
Does it allow full control of the Pocket 3 underwater?
It uses a one-to-one button control design for underwater operation. That said, some buyers have raised concerns about joystick control through the housing, so your experience may depend on how you normally frame and operate the camera.
What’s included in the box?
It includes the waterproof case, a quick-release buckle base, a screw, and an anti-fog sheet.
Specifications
| Product Title | PULUZ Dive Case for DJI Osmo Pocket 3 Waterproof Case PC Protective Shell 45M/147FT Underwater Diving Housing Cover with Accessories for Osmo Pocket 3 Action Camera |
|---|---|
| Category | Electronics > Camera & Photo > Underwater Photography > Housings |
| Brand | PULUZ |
| Manufacturer | PULUZ |
| Model Number | DJI Osmo Pocket 3 Dive Case |
| Video Capture Resolution | 4K (3840 x 2160) |
| Color | Transparent |
| Material | Plastic |
| Water Resistance Level | Waterproof |
| Enclosure Material | Plastic |
| Video Capture Format | MP4 |
| Compatible Devices | DJI Osmo Pocket 3 |
| Audio Recording | No |
| Media Type | Video |
| Mounting Type | Base Mount |
| Compatible Camcorder Models | dJI Osmo Pocket 3 |
| Camera Model Compatibility | DJI Osmo Pocket 3 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | P3C-45 |
| Built-In Media | 1 x Anti-fog sheet, 1 x Quick Release Buckle base, 1 x Screw, 1 x Waterproof Case |
| Warranty Description | 12 months |
Available variants
Set Name
- Insta360 X3
- DJI Osmo Pocket4
- Insta360 X5 Invisible
- DJI Osmo Pocket3
- Insta360 X3 Invisible
Recommended next
FitStill 263FT/80M Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black
The FitStill 263FT/80M underwater housing is built for GoPro HERO9 Black through HERO13 Black, using an aluminum alloy shell, stainless-steel hardware, and a large flat glass lens. It’s designed for serious water sports (up to 80m/263ft) with reported leak resistance, clear footage, and easy button access, with a couple of practical limitations to consider for audio and how the housing affects controls.
DIVEVOLK Underwater Touchscreen housing Seatouch 4 Max Diving Phone case
The DIVEVOLK SeaTouch 4 Max is an iPhone-specific underwater housing built around full touchscreen control, designed for scuba, snorkeling, and similar water activities down to 200 ft. It uses a sealed, no-battery design and an aluminum frame for protection, with some tradeoffs for screen-protector use and selfie quality through the membrane.
FitStill 60M Waterproof Case for Go Pro Hero 8 Black
A purpose-built waterproof housing for the GoPro Hero 8 Black, designed for water sports and deeper dives. It prioritizes a reliable seal, responsive controls, and image clarity with a large flat glass lens, with anti-fog inserts included.
Waterproof Case&Floating Hand Grip Compatible with Insta360 GO 3S, Protective Underwater Dive Housing Shell with Bracket Accessories
A purpose-built waterproof housing and floating hand grip bundle for the Insta360 GO 3S. It’s designed for underwater shooting up to 60 m, with a tempered-glass lens for clarity and a floating grip to help prevent loss. The main tradeoffs are fit precision and handling the case opening/lens cover correctly.