Phone Front Camera Cover, Webcam Cover Compatible for iPhone 17e / 16e / 14 / 14 Plus / 13 / 13 Mini / 13 Pro / 13 Pro Max (2 Pack, Black)
Quick take
This front camera privacy cover slides to block the iPhone’s webcam, with the goal of protecting your privacy without disabling Face ID. It’s designed for specific iPhone 13 to 17 variants and installs with adhesive. The biggest buying caveat is that if it covers the wrong nearby sensor area (or is misaligned), it may affect how the screen behaves during calls.
Pros and cons
Pros
- Slide-to-open webcam privacy for quick control.
- Face ID is intended to keep working since the system uses infrared near the camera.
- Adhesive holds well for many users when installed carefully.
- Fits over a screen protector for at least some buyers.
Cons
- Sensor alignment matters, and one fit issue can impact call-screen behavior.
- Compatibility is model-specific, so you need the exact listed iPhone series.
What buyers think
Buyer-review evidence is mixed but most comments focus on two themes: staying power and usability. Several buyers report the adhesive hold is strong when the phone is cleaned before installation, with at least one describing long-term use without the cover slipping. Others like that the cover is easy to operate and that it can work even when a screen protector is already installed. On the downside, there is at least one report of the cover interfering with a sensor used during calls, which prevented normal screen activation and keypad access until the issue was addressed. Overall, the review pattern suggests this is a practical privacy accessory if aligned correctly, but fit around nearby sensors should be taken seriously.
What this cover does (and who it’s for)
This is a front-facing camera privacy cover for select iPhone models. It’s meant to physically block the front camera and webcam area when you slide it over, giving you an extra layer of privacy in situations like video calls, remote meetings, or when your phone is sitting within view.
It’s a good match for buyers who want:
- A simple physical control for front-camera privacy (instead of relying only on software settings).
- A design intended to avoid interfering with Face ID, which relies on infrared components near the camera.
- An adhesive install that can be used alongside other phone screen protection.
Face ID and privacy, what to expect
The design is specifically marketed as not affecting Face ID, because Face ID uses infrared adjacent to the camera rather than the camera lens itself. In practice, that means the cover is intended to block the webcam view while leaving the core recognition pathway operational.
However, privacy covers are inherently location-sensitive. If a cover is positioned so that it lands over the wrong nearby sensor area, it can cause unintended side effects. That’s the main real-world risk to keep in mind.
Installation and fit considerations
The cover installs with adhesive tape. The key to good performance is alignment and surface prep. Buyers who reported long-lasting hold emphasized following the installation directions and cleaning the phone well before applying the adhesive.
If you use a screen protector, fit can still be workable, but you should still double-check clearance around the front sensor area. The goal is that the cover blocks the camera region without creeping into areas responsible for call-related screen behavior.
Pros and cons breakdown
Pros
- Convenient sliding control to cover and uncover the front camera area quickly.
- Targeted for Face ID usability, since the system uses infrared nearby.
- Works with screen protectors for at least some setups.
Cons
- It can interfere with call-screen sensors if it covers the wrong area or is misaligned, affecting normal screen activation during calls.
- Compatibility is limited to the listed iPhone models and series, so confirm your exact phone before ordering.
Is it worth it?
Choose this front camera privacy cover if you have one of the compatible iPhone models and you want a physical webcam blocker that’s designed to keep Face ID functional. It also tends to make sense for people who prefer a hardware solution for privacy rather than turning features on and off in software.
You may want to reconsider if you’re very sensitive to screen behavior during calls or if you don’t feel confident aligning adhesive accessories around the front sensor cluster. In those cases, look for alternatives that minimize sensor overlap risk and offer clearer positioning guidance for your specific iPhone variant.
FAQ
Will this cover affect Face ID?
It’s designed so Face ID should continue working because Face ID uses infrared components near the camera rather than the camera lens itself. That said, correct alignment is still important.
Does it work with a screen protector?
Some buyers report it can fit on top of a screen protector without issue. Your results can vary depending on how your screen protector edges sit near the front camera area.
How do I install it without causing sensor problems?
Clean your phone’s surface before applying the adhesive, align carefully with the front camera area, then press firmly for the time suggested by the instructions to help the adhesive set properly.
Is it compatible with all iPhones?
No. It’s listed for specific iPhone models in the iPhone 13, 14, 16, and related variants (including the specified mini, plus, and pro models). Confirm your exact model before buying.
Will it stay on?
Review feedback suggests it can stay on well when installed carefully. If you apply it over dust, oil, or residue, adhesion is more likely to be weaker.
Get the latest price
Specifications
| Product Title | Phone Front Camera Cover,Webcam Cover Compatible for iPhone 17e /16e / 14/14 Plus / 13/13 Mini /13 Pro / 13 Pro Max,Protect Privacy and Security,Not Affect Face ID, 2 Pack-Black |
|---|---|
| Category | Electronics > Computers & Accessories > Laptop Accessories > Camera Privacy Covers |
| Item Weight | 1.13 ounces |
| Brand Name | EYSOFT |
| Package Dimensions | 6.89 x 4.65 x 0.31 inches |
| Item model number | XF14/14Plus-Black |
| Color Name | Black |
| Special Features | Infrared |
Available variants
Color
- Black
Recommended next
![CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover](/product-images/019ed146-f382-7453-a0b1-e3fda202c51d-0-ecf7fa18f2b4.webp)
CloudValley Webcam Cover Slide[2-Pack], 0.023 Inch Ultra-Thin Metal Web Camera cover
The CloudValley slide webcam privacy cover is a minimalist, ultra-thin metal option designed to physically block laptop and mobile front cameras when you want privacy. Buyers like how discreet it is, how securely it sticks, and that it avoids blocking the device’s indicator light. The main tradeoff is careful handling, since the cover can feel delicate during installation and when opening or closing the shutter.
Toojcc Webcam Cover Slide, 6-Pack Ultra-Thin Privacy Covers
The Toojcc Webcam Cover Slide is an ultra-thin, slide-to-close privacy cover set (6 pack) designed to block laptop and device front cameras with minimal bulk. Reviewers generally find installation straightforward and the profile unobtrusive, but adhesion and fit can be less reliable on phones/tablets that move around, and careful placement matters on some Apple devices.
Laptop Camera Cover Slide, 2.0 Ultra-Thin Webcam Cover Slide Compatible (3-Pack)
A slim, slide-to-open webcam privacy cover designed to stick over many laptop, tablet, and phone front cameras. It’s easy to install, generally stays in place, and reviewers like the smooth switching for video calls, with the main tradeoff being that fit depends on camera shape and placement (and finger access may be less convenient if the groove is flat).
EYSOFT webcam cover slide compatible for laptop, desktop, PC, MacBook Pro, iMac, Mac mini, iPad Pro, smartphone
A slim, slider-style webcam privacy cover from EYSOFT that sticks to your device and closes over the camera when you are not using it. It is designed to be thin enough to not interfere with closing laptop lids, with a movable cover you can open for video calls. The main tradeoff is that placement and adhesive handling matter, since repositioning can be difficult.