(Pack of 2 4 AA Battery Holder with Leads, 4 AA Battery Holder with Wires
Quick take
This pack includes two 4-AA battery holders with permanently attached red and black leads, intended for easy rewiring and replacement. The pack is a 6V output holder (4 x 1.5V AA), and buyers tend to use it for device repairs or for building a small battery pack.
The main caveat is lead length. The supplied wires are about 5.9 inches (15 cm), so if your original device needs longer reach, plan on reusing connectors or splicing in additional wire.
Pros and cons
Pros
- Includes two 4-AA holders with leads (red for positive, black for negative).
- 6V output for 4 x AA systems (useful when your device expects 6V).
- Compact plastic ABS case, with a stated holder size of about 2.25 x 2.46 x 0.62 inches.
Cons
- Leads are relatively short (about 5.9 inches), which can require splicing for many repairs.
- No on/off switch or cover is included, so you may need separate control parts for your build.
What buyers think
Buyer-review evidence is generally positive for repair and DIY wiring, with themes focused on fit and function. Multiple buyers describe using these holders as replacements in real devices, reporting that the holders worked properly after rewiring. Common practical feedback is that the new leads are shorter than some original battery packs, so successful installs often involve cutting, splicing, and carefully matching wire polarity.
There are also a couple of compatibility notes. Overall, the most consistent “decision factor” in the feedback is whether your device expects 6V and whether the lead length is enough for your wiring path.
Key specs that matter for compatibility
Voltage output (6V)
This is a 4-AA battery holder rated at 6V, because it’s intended for 4 x 1.5V AA cells in series. If your device is built for 6V, this is the correct direction. If your device expects a different voltage, you may need a different battery holder type or an alternate wiring approach.
Lead length and wire behavior
The attached red and black leads are about 5.9 inches (15 cm). Reviews and buyer comments consistently suggest that this is the component that most often determines whether the holder can drop into an existing compartment without modification. The wire is described as thin, so careful splicing or soldering (and strain relief like tie wraps) tends to matter for reliability.
Physical size and materials
The holder is made with a plastic ABS case. The stated dimensions are about 2.248 x 2.457 x 0.622 inches (5.71 x 6.23 x 1.58 cm), and the weight is about 13 g for one holder. If your device door or compartment is tight, measuring the available space is worth it before you commit.
Where this battery holder fits best
- Repairs that need a simple AA pack with leads: Ideal when your existing battery compartment uses 4 AA cells and you just need a replacement pack to reconnect to your wiring.
- DIY builds and re-pack projects: A practical choice when you want red/black leads already attached so you can route them to your project.
- Projects with short internal wiring distance: If your wiring path is close to the compartment, the provided lead length reduces the amount of rework.
Who should buy, and who should avoid
Buy if you need
- A 4-AA (6V) battery holder with pre-attached red and black leads.
- A compact ABS holder designed for compartments roughly in the stated size range.
- A two-pack so you can repair multiple items or keep a spare.
Avoid or double-check first if
- Your device expects a non-6V battery setup (this unit is not designed to be voltage-adjustable by default).
- Your installation requires longer wires than the about 5.9 inch lead length, unless you’re comfortable splicing and securing additional wire.
- You need an integrated on/off switch or cover, because this option does not include those features.
Pros and cons in real-world use
Pros
- Simple, direct replacement style: Buyers report success when replacing a broken or failing battery pack in devices, especially when orientation and series wiring match.
- Practical for rewiring: The inclusion of red/black leads supports faster reconnecting than starting from raw cell holders.
- Two units per pack: Useful if you’re fixing more than one device or want a backup holder.
Cons
- Short leads can slow you down: If your original pack had longer leads, you may need to splice in extra length and reinforce connections.
- No extra controls: Lack of a switch means your device or build must provide control elsewhere.
Price and availability
It’s listed as in stock in the US market in this review context. For the most current price and to confirm you’re looking at the exact 2-pack variant, use the button below.
Verdict
This 2-pack of 4-AA battery holders with leads is a solid buy for 6V projects and repairs where you want a straightforward AA series pack and you can work within the supplied ~5.9 inch lead length. If your device expects 6V and the wiring distance is short enough, it can be an easy swap. If you need longer reach or a different voltage, you’ll likely need to plan on splicing extra wire, or consider a different battery holder configuration.
FAQ
What voltage does this 4 AA battery holder provide?
It’s designed for 4 x AA cells and is rated at 6V output.
Are the red and black leads connected to the battery polarity?
Yes. The red wire corresponds to the positive side, and the black wire corresponds to the negative side.
How long are the attached leads?
The wire length is about 5.9 inches (15 cm).
Does it include an on/off switch or a cover?
No. The holder is supplied without an on/off switch and without a cover.
Will it work for a device that needs a different voltage than 6V?
If your device does not operate on 6V, this holder may not be compatible because its output is fixed for 4 x AA in series.
Is the pack size large, and will it fit inside tight compartments?
It’s relatively compact, with stated dimensions of about 2.248 x 2.457 x 0.622 inches. Still, it’s important to measure your compartment, especially for door-mounted or space-constrained installs.
Can I extend the leads if my device needs more wire length?
Yes, many repairs require splicing or rerouting wire. Because the leads are short and can be thin, use careful connections and strain relief so the wiring stays reliable.
Specifications
| Product Title | (Pack of 2 4 AA Battery Holder with Leads, 4 AA Battery Holder with Wires |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | LampVPath |
| Manufacturer | LAMPVPATH |
| Model Name | LAMPVPATH |
| Model Number | 4AA-2PC |
| Item Weight | 0.02 Kilograms |
| UPC | 739340317737 |
| Battery Capacity | 6 Volts |
| Voltage | 6 Volts |
| Reusability | Single Use |
| Unit Count | 2 Count |
| Battery Weight | 13 Grams |
| Item Dimensions | 2.25 x 2.46 x 0.62 inches |
| Antenna Location | Holder |
| Recommended Uses For Product | Holder |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
2PCS 3 x 1.5V AA Battery Holder, 3 AA Battery Case Box Holder 4.5-5V with Cover and On/Off Switch, with USB Cable
This 2-pack 3xAA battery holder converts AA power into a 4.5 to 5V output for simple, portable projects like LED strips, toys, and small 5V devices. Buyers praise easy setup and reliable operation, with one major caveat: any device powered this way is only as safe as the battery you insert, because leaking batteries can cause problems.
(Pack of 8 AAA to AA Battery Adapter, AAA to AA Battery Converter Holder, AAA to AA adapter for Battery Converter AAA to AA
These AAA to AA battery adapters (8-pack) let you use AAA batteries in devices that normally require AA batteries. They’re a simple, compact fix for flashlights, emergency kits, and everyday gadgets, with the main caveat being that fit can vary slightly by device and AAA brand.
ENGPOW Battery Organizer, Fireproof Battery Organizer Storage Case with Tester (BT168)
The ENGPOW BT168 is a soft, zipper-closed battery storage case designed to hold 220+ mixed battery types while keeping them separated in foam cutouts. It adds a battery tester for quick “what to recycle” checks and aims to reduce risk with fire-retardant, water-resistant materials. It is best for households that want a single place for AA/AAA/C/D/9V and common button batteries, but it has a fixed slot layout, so niche battery shapes may not fit perfectly.