NuIth Single Din Radio Installation Dash Kit W/Radio Wiring Harness for 1974-2003 Chrysler/Dodge/Jeep
Quick take
The NuIth single DIN dash kit is made to install an aftermarket radio in the factory radio location for select 1974-2003 Chrysler, Dodge, and Jeep vehicles. It includes an installation mounting plate plus a wiring harness meant to connect directly to the factory connector, aiming to reduce wiring guesswork. The main caveat is fitment, this kit only applies to specific make, model, and year ranges, and you may need to reuse your vehicle’s existing trim hardware.
Pros and cons
Pros
- Single DIN mounting plate designed to use the factory location and cover the dash gap.
- Wiring harness connects to the factory radio side without cutting the original wiring harness (for compatible vehicles).
- Mount uses durable ABS plastic, with the harness described as using copper wires for conductivity.
- Easy install approach, reports mention fastening with minimal steps.
Cons
- Vehicle-year compatibility is limited, so you must confirm your exact Chrysler/Dodge/Jeep model and year.
- Some installs may require reusing the factory radio side trim plate and screws.
- Material and wiring quality claims are functional, but long-term durability beyond fit-and-install feedback is not heavily evidenced.
What buyers think
Buyer-review evidence for this kit is focused on fit and install simplicity. Multiple reviews describe a near “perfect” fit in compatible vehicles, with good alignment and a finished, professional-looking result. Wiring experiences are also a theme, reviewers mention that connectors match up well and that the instructions help identify wires, making the radio swap easier. A smaller set of notes mention the kit looking strong and using heavy-duty plastic, with one review specifically calling out that it was a cost-effective way to replace brittle factory trim and get the install done.
Overall, the available review evidence supports the idea that this kit is a straightforward solution when you have the correct vehicle-year match and you are installing a single DIN aftermarket radio.
Who this dash kit is for
- Drivers with a compatible Chrysler, Dodge, or Jeep (1974-2003 range) who want a single DIN aftermarket radio to sit in the factory location.
- DIY installers who prefer a harness that connects to the existing factory connector instead of cutting the factory wiring.
- Buyers on a budget who still want a cleaner-looking dash finish that covers the opening gap.
Vehicle fitment you should double-check first
This kit targets specific model years. It includes documented compatibility for select Chrysler models (such as Cirrus 1995-2000, Concorde 1993-1997, Fifth Avenue 1984-1993, and others), plus Jeep (Cherokee 1997-2001, Grand Cherokee 1993-1998, Wrangler 1997-2002) and Dodge (including Ram 1500 1994-2001, Caravan 1984-2000, Dakota 1987-2000, Durango 1998-2000, and certain others). Before buying, verify your exact trim and model year, because dash and connector layouts can vary even within a broader generation.
Design and build overview
The mounting portion is made from heavy-duty ABS plastic, described as painted to match the factory dash color. The included harness is described as using copper wires for conductivity, and the overall intent is to make the aftermarket radio installation “plug-in” at the connector level (on compatible vehicles) and avoid cutting the original harness.
Installation experience, what to expect
Based on buyer feedback, the installation process is typically straightforward and relies on reusing existing hardware. One tradeoff that comes up in the product design details is that you need to reuse your vehicle’s factory radio side trim plate and screws. If your existing trim is intact, this is usually not a problem, but if your trim is damaged, plan for that before starting.
For wiring, the harness is intended to connect directly to the factory harness side and the connectors are described by reviewers as fitting correctly, with instructions that help map each wire to its function.
Pros and cons (real-world tradeoffs)
Good fit when everything matches
If your vehicle is in the compatible year list and you’re installing a single DIN aftermarket radio, this kit is positioned as an easy path to a clean, factory-location look, plus connector-based wiring.
Where buyers can get tripped up
- Compatibility checks matter. If your vehicle is outside the listed fitment range, you may end up with poor alignment or connector mismatch.
- Plan for reused trim hardware. The installation may not be fully tool-free if your factory trim plate or screws are missing or broken.
Is it worth it?
The NuIth single DIN dash kit with wiring harness is a solid value option if your primary goals are proper fit in the factory location, a more finished-looking dash opening, and a wiring harness that connects to the existing factory connector without cutting. It’s best for buyers doing a budget-friendly radio upgrade in a compatible Chrysler, Dodge, or Jeep, and it may not be the right choice if you cannot confirm exact vehicle-year compatibility or you are expecting an installation that does not require any reuse of factory trim hardware.
Alternatives to consider
If you are not sure this matches your exact vehicle-year, consider alternatives based on the same criteria:
- Vehicle-specific dash kits for single DIN radios from other installers, but only if the fitment list explicitly includes your exact model year.
- Harness-first solutions if you already have a compatible dash bezel or mounting plate, and you just need the correct radio wiring interface.
- Complete radio installation bundles when you want one kit to cover both mounting and wiring, and you prefer to minimize compatibility guessing.
FAQ
Will this work for both single DIN and double DIN radios?
This kit is designed for a single DIN aftermarket radio. If you plan to install a double DIN unit, you will need a compatible double DIN dash kit instead.
Does it require cutting the factory wiring harness?
The wiring harness is designed to connect directly to the existing factory connector for compatible vehicles, and the setup is described as not needing to cut the original wiring harness. Always confirm wiring compatibility for your specific vehicle and radio.
What vehicle models and years is it compatible with?
It is intended for select Chrysler, Dodge, and Jeep vehicles within the 1974-2003 range, including specific model and year lists such as Cirrus (1995-2000), Cherokee (1997-2001), and Ram 1500 (1994-2001). Check your exact year and model before ordering.
Do I need to reuse factory trim pieces?
Installation guidance indicates you will typically need to reuse the factory radio side trim plate and screws.
What’s the main benefit of including the wiring harness?
The harness is meant to simplify wiring by matching the factory connector side, and it is paired with instructions that help identify wire functions during the aftermarket radio install.
Where can I buy the latest version or check current pricing?
Specifications
| Product Title | NuIth Single Din Radio Installation Dash Kit W/Radio Wiring Harness for 1974-2003 Chrysler/Dodge/Jeep, Single Din Radio Mounting Plate for Aftermarket Radio Mounting (Dash KIT W/Radio Wire) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Vehicle Audio & Video Installation |
| Item Weight | 4.2 ounces |
| Package Dimensions | 9.33 x 4.37 x 1.65 inches |
| Item model number | DASH KIT W/ RADIO WIRE |
| Warranty | 30 DAYS |
Available variants
Model
- DASH KIT W/ RADIO WIRE
- DASH KIT
Recommended next
![VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]](/product-images/019ed146-d827-75bd-84e0-aec48a74b355-0-cb03f238f7ed.webp)
VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]
The VICSEED 2026 Ultimate Sturdy Car Phone Holder is a universal, long-arm car mount designed for secure one-handed mounting and 360° positioning. It uses a strong retractable suction cup for dashboard or windshield use, plus an air vent clip option, and it’s intended to handle phones in thick cases (up to about 0.6" thickness). The main caveat is that air-vent fit can vary by vehicle vent design, so dashboard/windshield suction may be the safer bet for some drivers.
Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994-2012 GM Vehicles
The Metra Electronics 95-2001 double DIN dash kit is an installation-focused trim and mounting solution for select 1994 to 2012 GM vehicles. Buyers report a generally straightforward fit and use of the included brackets, trim plate, and spacers, but fit can vary by exact vehicle and you may need to pay attention to small alignment details.
Radar Detector Mount,Rearview Mirror Rod Radar Mounting Bracket+Rearview Mirror Hard review
A rearview-mirror rod mounting kit for compatible Uniden radar detectors, designed to keep the unit stable and close to the mirror. Best suited for buyers who want a low-profile install with a hardwire-style power cord (RJ11 required) and included inline fuse protection, with a key caveat that it only fits listed Uniden models.
Scosche ICCR3BN Single DIN Radio Install Dash Kit Compatible with Select 2002-07 Chrysler, Dodge & Jeep Vehicles
The Scosche ICCR3BN is a vehicle-specific single DIN dash kit and harness designed to help you install an aftermarket radio in select 2002 to 2007 Chrysler, Dodge, and Jeep models. It’s built for a “factory look” and aims to reduce wiring and fitment guesswork, with the main caveat being that it is true single DIN, and some radios may require minor kit trimming to match the opening size.