Radar Detector Mount, Rearview Mirror Rod Radar Mounting Bracket + Rearview Mirror Hard Wire Power Cord kit (for Uniden Radar Detector)
Quick take
This rearview-mirror rod mounting kit is built for compatible Uniden radar detectors and aims to keep your detector stable, close to the glass, and out of your sightline. It includes a rearview mirror tap style hardwire power cord with an inline fuse, but you must have an RJ11 connection port and you should only expect fitment for the specific listed Uniden models.
Pros and cons
Pros
- Made for specific Uniden radar detector models, including popular LRD and DF-series models listed for compatibility.
- Designed to sit firmly on the rearview mirror rod, with reports of no wobble during driving.
- Includes a power cord kit with an inline fuse for more stable power-line connection.
- Comes with multiple mirror tap sizes (three) to match different vehicle mirror setups.
Cons
- Not a universal mount, fitment is limited to listed Uniden detector models.
- Requires the detector connection port to be an RJ11 jack before installing the mirror plug cable.
- One fit issue was reported for an R7-style detector, where the locking tab length did not fully secure.
What buyers think
Buyer-review evidence is generally consistent on two points: the mount’s build feels solid and the install is straightforward, with many users highlighting quick setup and minimal movement. Several comments also emphasize the low-profile positioning, describing it as staying close to the rearview mirror without obstructing visibility. Cable-related feedback is mostly positive, with users noting the included cord/tap sizes helped them match their vehicle’s rearview mirror setup.
What this mount kit is for
This is a rearview mirror rod mounting bracket plus a hardwire power cord kit intended for compatible Uniden radar detectors. If your goal is a clean, low-profile install that keeps the detector positioned near the mirror rather than on the dash, this kit is designed around that approach.
Compatibility and the two fitment checks you should do first
1) Confirm your Uniden model is on the supported list
Compatibility is limited to the Uniden radar detector models listed for this bracket (including R1 through R7, and a large set of LRD and DF-series models such as LRD300, LRD350, LRD400, LRD450, and LRD950, plus DF1/DFR2 to DFR9 variants). If your detector model is not listed, this kit is not intended for it.
2) Verify the detector connection port is an RJ11 jack
Before installing, make sure the radar detector’s connection port is an RJ11 jack, since the rearview mirror plug cable depends on that connector type. Skipping this check is one of the easiest ways to end up with an unusable setup.
Installation experience
Reviews suggest the mechanical part of the install is uncomplicated, with buyers describing the bracket as easy to install and adjustable across multiple positions. The kit includes a set of disassembly accessories for the aluminum bracket, and it provides three different mirror tap options, which can be helpful for vehicles that require a specific tap size.
For best results, plan to spend a few minutes aligning the bracket and choosing the tap size that matches your vehicle’s rearview mirror arm configuration. While the kit is designed to be stable while driving, correct alignment is what helps it stay that way.
How stable is it while driving?
The most common feedback theme is stability. Several buyers report no wobble and that the mount holds firmly even over bumps. That aligns with the intended design, which uses a rearview mirror rod mounting approach meant to reduce shake and vibration.
Power and inline fuse notes
The kit includes a hardwire-style power cord for the radar detector, with an inline fuse built into the cable. That can be a useful safety-oriented detail compared to an un-fused direct power connection, as it helps make the power-line connection more stable. As always with any hardwire install, be sure you’re comfortable with routing the cable cleanly and securely so it does not interfere with mirror operation or visibility.
Pros and cons summary
- Best for: Drivers with a compatible Uniden radar detector who want a low-profile rearview-mirror mount and a hardwire power cord kit.
- Worth considering if: You want multiple mirror tap sizes included, and you care about keeping the detector close to the mirror to avoid obstructing your view.
- Skip it if: Your Uniden model is not on the listed compatibility set, or if you do not have an RJ11 jack connection on the detector side.
- Main tradeoff: It is specialized hardware, so buyers should prioritize fitment checks over “universal” expectations.
Price and availability
Pricing can fluctuate on marketplaces, but the kit is positioned as a budget-friendly alternative to more expensive radar mount solutions. If you’re cost sensitive, this is the type of accessory that can be a practical upgrade, as long as your detector model and connector type match.
FAQ
Is this radar detector mount compatible with all radar detectors?
No. It is designed for compatible Uniden radar detector models on the supported list, and it is not intended for models outside that set.
Does the power cord require an RJ11 connection?
Yes. Before installing the rearview mirror plug cable, confirm your detector connection port is an RJ11 jack.
Will this mount block my rearview mirror view?
Buyers generally describe it as staying close to the rearview mirror and not obstructing visibility, but the final outcome depends on how you position and adjust the mount.
Does the mount stay stable on bumpy roads?
Review feedback is generally positive on stability, with reports of no wobble and no noticeable vibration during driving.
What vehicles is the mirror tap kit for?
It’s meant for rearview mirror setups that use the included tap sizes. The kit includes three different mirror tap options to help you match your vehicle’s mirror arm arrangement.
Ready to check current pricing and compatibility details for your exact configuration? Buy on Amazon
Specifications
| Product Title | Radar Detector Mount,Rearview Mirror Rod Radar Mounting Bracket+Rearview Mirror Hard Wire Power Cord kit16,with Inline Fuse (for Uniden Radar Detector) |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Vehicle Audio & Video Installation |
| Brand | SDSACZMU |
| Manufacturer | loudishi shanda dianzikeji youxian gongsi |
| Model Number | B0CFB5HQ9Y |
| Color | Black |
| Item Weight | 0.18 Kilograms |
| Compatible Devices | compatible with Uniden Radar Detectors |
| Mounting Type | Rear View Mirror |
| Additional Features | Shock Resistant |
| Water Resistance Level | Not Water Resistant |
| Compatible with Vehicle Type | Car, Truck |
| UPC | 797447705062 |
| Enclosure Material | Aluminum |
| Special Feature | Shock Resistant |
Available variants
Style
- For Escort Beltronics Vector Rocky Mountain Phantom-T Radar
- For Radar Base With EZ Magnet Connection
- For Escort Max / Max2/ MAX360 Radar
- For Cobra Radar Detector
- For Uniden Radar Detector
- For Valentine V1 Gen1 and Gen2 radar detector
Recommended next
![VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]](/product-images/019ed146-d827-75bd-84e0-aec48a74b355-0-cb03f238f7ed.webp)
VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]
The VICSEED 2026 Ultimate Sturdy Car Phone Holder is a universal, long-arm car mount designed for secure one-handed mounting and 360° positioning. It uses a strong retractable suction cup for dashboard or windshield use, plus an air vent clip option, and it’s intended to handle phones in thick cases (up to about 0.6" thickness). The main caveat is that air-vent fit can vary by vehicle vent design, so dashboard/windshield suction may be the safer bet for some drivers.
Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994-2012 GM Vehicles
The Metra Electronics 95-2001 double DIN dash kit is an installation-focused trim and mounting solution for select 1994 to 2012 GM vehicles. Buyers report a generally straightforward fit and use of the included brackets, trim plate, and spacers, but fit can vary by exact vehicle and you may need to pay attention to small alignment details.
Scosche FD1423B Single DIN Radio Dash Kit Compatible with Select 1995-11 Ford, Lincoln, Mazda and Mercury Vehicles
The Scosche FD1423B is a single DIN dash kit built for select 1995-2011 Ford, Lincoln, Mazda, and Mercury vehicles. It helps an aftermarket stereo install look factory-finished, with a standard DIN opening and an included installation hardware set, though some buyers note the frame can feel a bit thin and installation may require careful trial fitting depending on the stereo and mounting hardware.
Scosche TA2053B Double DIN Radio Install Dash Kit Compatible with Select 2005-2008 Toyota Tacoma
The Scosche TA2053B is a vehicle-specific double DIN dash kit for select 2005 to 2008 Toyota Tacoma models. Buyers typically like the tight, gap-free look, good color match, and the ability to reuse stock Tacoma mounting hardware for a secure, properly aligned install, with the main caveats being minor trim fitment variability and a couple of parts that may feel less sturdy.