(Not Plastic) 3Pack Outdoor Extension Cord Safety Cover,11.2x6 Inch,600D Canvas Oxford Cloth Waterproof Electrical Outlet Cover, with Velcro Closed,Weatherproof Plug Cable Connectors Protector
Quick take
ClawsCover’s 3-pack outdoor safety covers are built from thick 600D canvas cloth, designed to shield outdoor plug connections from rain, moisture, dirt, and UV exposure. They use a three-sided Velcro closure, aiming for an easier, more secure wrap than brittle plastic covers.
The main tradeoff is fit. At 11.2 x 6 inches, they can work well for many common connections, but you will want to check whether your specific plug and adapter size matches the cover dimensions.
Pros and cons
Pros
- Thick 600D canvas plus a waterproof, UV-resistant fabric coating for outdoor use.
- Three-sided Velcro closure intended to keep the cover sealed around the connection.
- Flexible fabric design that avoids the “plastic tabs break” issue some buyers associate with rigid covers.
- Indoor and outdoor versatility for things like holiday lighting and yard power connections.
Cons
- Not a one-size-fits-all solution, since the cover is sized (11.2 x 6 inches) to your plug and connector shape.
- Positioning matters, multiple buyers describe better results when the cover is kept flat and off the ground.
What buyers think
Buyer-review evidence is generally positive, with recurring themes around practicality and outdoor performance. Several buyers say the covers are easy to wrap and adjust for real-world plug connections, and that the fabric form factor helps them fit more naturally around cords compared with rigid plastic covers.
Users also mention that keeping the cover properly positioned (for example, laid flat and not allowing openings to sit where water can pool) improves how well it protects against wet weather. Review evidence also suggests these covers can be useful beyond extension cords, like protecting other outdoor or exposed connection points, but fit and use-case alignment still matter.
How these canvas cord covers work
These are designed to go over the connection end of an outdoor power setup. You place the plug and connector area into the safety seal portion, then close the cover using the three-sided Velcro. The product guidance emphasizes that if you hang it, the Velcro side should face down, which helps limit water getting into the sealed area.
Weather protection, without rigid plastic
A key differentiator here is material. Instead of a rigid plastic shell, the cover uses thick 600D canvas Oxford cloth, with claims of waterproof and UV-resistant performance. Buyers specifically call out that the fabric construction avoids cracking or breaking tabs that can happen with conventional plastic covers over time.
Size and fit considerations
Each cover is listed at 11.2 x 6 inches. That means you should confirm the overall fit of your plug, any adapter pieces, and how much “bulk” your connection creates. In practice, some shoppers note it can be “a bit smaller than expected,” which is a signal to measure first rather than assume every outdoor plug will fit comfortably.
It also helps to think about placement. Review evidence suggests these work best when you can keep the cover parallel to the ground and off the surface, reducing the chance of water pooling around the edges.
Pros and cons for different buyers
Best for
- Homeowners and renters who want a simple way to protect outdoor plug connections for seasonal lighting, yard tools, or cameras.
- People tired of brittle plastic covers that crack or break, especially in sun and foot-traffic areas.
- Buyers who are okay checking fit against their plug and connector dimensions before closing.
Who should avoid
- Anyone with very large or irregular connector shapes that may not fit the 11.2 x 6-inch cover area.
- Shoppers who need a “set it and forget it” rigid weatherproof box, because cloth covers still rely on proper positioning and sealing with Velcro.
Price and availability
The product is sold as a 3-pack and is available on the major US marketplace for a listed price point (the exact cost can vary over time). Check the current listing for the most up-to-date price and to confirm the pack size you want.
Verdict
Choose the ClawsCover 3-pack if you want outdoor protection for plug and connector areas using thick, flexible, UV-resistant canvas instead of rigid plastic. It appears especially attractive to buyers who have had plastic covers fail, and it can be a practical solution for many common outdoor setups. Just plan to verify fit, and position the cover in a way that keeps water from pooling around the sealed edge.
FAQ
How do you close the cover?
Place the connection inside the cover, then close the three-sided Velcro so the sealed area stays shut around the plug and cable connection.
Is it actually waterproof?
The cover is marketed as waterproof and UV-resistant. In use, reviewers describe better results when the cover is kept flat and off the ground, which helps minimize water pooling around the edges.
What are the cover dimensions?
Each cover is listed at 11.2 x 6 inches (28 x 15 cm).
Is this only for extension cords?
It’s intended for outdoor power connections, but the shape and closure also make it useful for other exposed connection areas, as long as the cover fits your specific plug or connector setup.
Will it work if I hang it?
The setup guidance emphasizes that if you hang it, position it so the Velcro side faces down, which helps limit water entry into the covered area.
Specifications
| Product Title | (Not Plastic) 3Pack Outdoor Extension Cord Safety Cover,11.2x6 Inch,600D Canvas Oxford Cloth Waterproof Electrical Outlet Cover, with Velcro Closed,Weatherproof Plug Cable Connectors Protector |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Floor Cord Covers |
| Brand | ClawsCover |
| Manufacturer | ClawsCover |
| Model Number | outdoor outlet cover |
| Color | Black |
| Connector Gender | Male-to-Female |
| Plug Type | Type A or Type B |
| Power Cord Prong Count | 2 |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Special Features | Abrasion Resistant, Heavy Duty, Tear-Resistant, UV-Resistant, Waterproof |
| Has Extension Cord | No |
| Water Resistance Level | Waterproof |
| Item Length | 10 Inches |
| EU Spare Part Availability Duration | 5 Years |
| Unit Count | 3.0 Count |
| Mfr Part Number | CC-OECC-3 |
| Warranty Description | 1 YEAR WARRANTY |
| Built-In Media | Velcro |
| Plug Format | Type A or Type B |
Available variants
Size
- X-Large
- Medium
- Large
- Small
Recommended next
Cord Wall Cover, 118in Self-Adhesive Wire Covers for Cords on Wall, Extension Cable Hider
A low-profile, self-adhesive cord cover designed to hide power and media cables on floors or along walls. Buyers like the clean look and simple install, but results can depend on how well it unrolls and how much firm pressure is used on the adhesive.
Portifera Morland Protect Rubber
The Portifera Morland Protect Rubber is a low-profile, repositionable nitrile rubber floor cord cover mat designed to reduce trip hazards in busy indoor and outdoor areas. It uses a built-in cable channel to route cords under the mat and a high-visibility border to mark cable runs, with durability features aimed at tougher environments like workshops, garages, and commercial spaces. The main tradeoff to consider is that the integrated wire run is relatively shallow, so it may not handle thick bundles or very large cable setups.
YONSHENG Rubber Cable Ramp Cord Cover Cable Protector Ramps Wire Hose (3-Pack, 1 Channel)
The YONSHENG 1-channel rubber cable ramp cord covers are designed to protect hoses and extension cords that must cross driveways or walkways. A flip-open top makes adding and removing cables easier, and modular interlocking lets you join multiple ramps for longer runs. Main tradeoff: the flip cover can be less secure for some “doors-down” setups, so you may need to position them carefully for consistent closure.
Legrand - Wiremold Cord Cover, Ivory Hider for Wall Mount TV, 5 Ft Floor or Wall Cord Cover, CDI-5
The Legrand Wiremold CDI-5 is a 5-foot ivory floor cord cover designed to conceal TV and power cords, reduce tripping risk, and create a cleaner look in high-traffic areas. It’s easy to cut and install with included pressure-sensitive tape, but it’s sized for slimmer cable runs and can be less forgiving on very smooth floors if the ends are not well secured.