NEEWER Silicone Stand Base for Pocket 4 & 3, ø64mm
Quick take
The NEEWER silicone stand base is a simple desktop mount for DJI Osmo Pocket 4 and Pocket 3, built to keep your gimbal camera stable on a tabletop while helping prevent scratches. It is best for vlogging and stationary recording, with the main caveat that using the base may affect compatibility with certain Pocket creator-combo accessories.
Pros and cons
Pros
- Made specifically for Pocket 4 and Pocket 3, with a desktop mounting fit.
- Soft silicone helps with non-slip stability and desk scratch protection.
- Keeps the USB Type-C charging port accessible for uninterrupted charging.
- Small accessory that supports tabletop shooting for content creation.
Cons
- May change compatibility with certain Pocket 4 or 3 creator-combo accessories.
- Designed for tabletop use, not for frequent travel stands, floor mounting, or bigger rig setups.
What buyers think
Buyer-review evidence for this silicone base is limited but consistently positive in tone. The recurring themes are that the base fits well, works as expected, and makes the Pocket camera easier to use hands-free on a desk or bedside. Several comments focus on stability and balance during simple, stationary recording scenarios, without flagging major quality issues.
What it is, and who it’s for
This is a silicone desktop stand base (ø64mm) meant to attach to DJI Osmo Pocket 4 or Pocket 3, giving you a reliable way to set the camera down for vlogging, video calls, and straightforward tabletop filming. If your workflow involves keeping the camera in one place, the base helps you avoid balancing the Pocket camera on uneven surfaces, while also reducing the risk of scuffs on your desk.
Desk stability and scratch protection
The base is constructed from soft, premium silicone. That matters because silicone provides grip on many surfaces, helping the camera stay planted. It also acts as a buffer between the Pocket and your tabletop, which is especially useful if you set your camera down frequently between takes.
Charging access during use
A practical detail for creators is that the design keeps the USB Type-C charging port accessible. That means you can keep charging while the camera is resting on the stand for longer filming sessions, live recording, or editing time with minimal interruptions.
Compatibility notes to watch
The key limitation is that using the base may affect compatibility with certain accessories from the Pocket 4 or Pocket 3 Creator Combo. If you already rely on a bundled add-on setup, double-check that your configuration still sits correctly and that any accessory clearance is maintained when the base is installed.
How it compares to other camera mount options
Desktop bases like this are typically the simplest way to get stable, repeatable framing on a table. They tend to be less versatile than tripods, handheld mounts, or full cages that support more mounting points. If you mainly shoot stationary content (talking head, product B-roll, desk tutorials), a small silicone base is usually the most direct fit. If you need height adjustment, pan-and-tilt flexibility, or frequent repositioning, you may want a more adjustable mount instead.
Pros and cons
Pros
- Designed for Pocket 4 and Pocket 3 desktop mounting.
- Non-slip soft silicone for more stable placements.
- Helps protect your desk from scratches.
- USB Type-C charging port stays reachable.
- Works well for hands-free tabletop shooting.
Cons
- May interfere with compatibility for some Pocket creator-combo accessories.
- Best suited for desk or tabletop use, not as a universal mounting solution.
Verdict: is the NEEWER stand base worth it?
If you want a straightforward way to set your DJI Osmo Pocket 4 or Pocket 3 down for hands-free filming, the NEEWER silicone stand base checks the main boxes: stable tabletop placement, scratch protection, and charging access. The one decision point is accessory compatibility, so it is worth confirming your current Pocket setup still works smoothly once the base is attached.
FAQs
Will this work with DJI osmo pocket 4 and pocket 3?
Yes. The stand base is designed for Pocket 4 and Pocket 3 desktop mounting.
Does it block charging?
No, it is designed to keep the USB Type-C charging port accessible while the camera is on the base.
Is it meant for tabletop shooting only?
It is primarily a desktop or tabletop solution for stationary content, not a substitute for adjustable tripod setups.
Will it work with Pocket creator-combo accessories?
It may affect compatibility with certain accessories from the Pocket 4 or Pocket 3 Creator Combo, so you should verify clearance and fit with your specific add-ons.
Does the silicone base help prevent scratches?
Yes. The soft silicone construction is intended to reduce scuffing on your desk while supporting a stable placement.
Where can I buy it?
You can view the latest price and availability on Amazon: Buy on Amazon.
Specifications
| Product Title | NEEWER Silicone Stand Base for Pocket 4 & 3, ø64mm Nonslip Soft Stable Anti Scratch Desktop Camera Mount Support Base Accessory Compatible with DJI Osmo Pocket 4 & 3 Gimbal Camera, AC020 |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Tripod & Monopod Accessories > Camera Mounts & Clamps |
| Brand | NEEWER |
| Manufacturer | NEEWER |
| Model Name | AC020 |
| Model Number | AC020 |
| Screen Size | 64 Millimeters |
| Color | Black |
| UPC | 191073104068 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | 10105993 |
| Built-In Media | 1 x Silicone Base for Pocket 3 |
| Warranty Description | 1 Year Manufacturer |
| Compatible Devices | Camera |
| Audio Recording | No |
| Shooting Modes | Video, Photo, Slow Motion, Timelapse |
| Water Resistance Level | Not Water Resistant |
| Number of Items | 1 |
Available variants
Style
- AC023
- AC051
- AC018
- AC021
- AC020
Recommended next
Dango Design Gripper Mount for GoPro/Osmo/Insta360 (Helmet Clamp Mount)
The Dango Design Gripper Mount uses a clamp-and-grip jaw system (no sticky adhesive) with a safety leash to secure GoPro-style cameras on motorcycle, dirt bike, and other helmets. It’s praised for fast attachment, a stable first-person view, and versatility, but it may not grip as well on very smooth or slick helmet surfaces, and it costs more than basic alternatives.
TELESIN 360 Backpack Mount Shoulder Strap Clip Holder Quick Release Adapter Base
The TELESIN 360 backpack mount is a hands-free action cam strap setup with a 360 rotating head and a quick-release tripod adapter base. It’s designed for backpacking and active POV shooting, and it swaps between mounted and handheld use faster than many strap mounts, with one notable caveat: the included clip has mixed durability expectations versus using your camera’s own clip system.
Aluminum NVG Helmet Mount, Tactical Helmet NVG Mount Compatible with GoPro Hero 13/12/11/10/9/8, DJI Osmo Action 6/5 Pro/4/3, Nano, Insta360, AKASO and Most Action Cameras
An aluminum NVG helmet mount designed to slide into NVG mounting plates and hold compatible action cameras at a lower, steadier position. Review feedback highlights solid metal build and straightforward installation, with occasional looseness that may require extra padding to fully eliminate wobble.
HSU Aluminum 1/4 inch 20 Camera Mount, 360 Degree Rotation Tripod Adapter
The HSU aluminum 1/4-20 to GoPro-style adapter adds a 360-degree swivel to help action cameras mount to standard tripod accessories. It’s a good fit for GoPro Hero users and other action cams that support 1/4-20 accessories, with solid all-metal build as a common theme. The main tradeoff is that you may need to follow the orientation instructions carefully, and the finish may show wear where the swivel moves.