Aluminum NVG Helmet Mount, Tactical Helmet NVG Mount Compatible with GoPro Hero 13/12/11/10/9/8, DJI Osmo Action 6/5 Pro/4/3, Nano, Insta360, AKASO and Most Action Cameras
Quick take
This aluminum NVG helmet mount is made to integrate with helmets that have NVG mounting plates, giving you a lower, more stable position for action-camera style footage. It is a metal, press-fit style mount that installs and removes easily, but a few buyers mention it can feel slightly wobbly on certain NVG mounts, sometimes needing extra padding to tighten things up.
Pros and cons
Pros
- Metal construction, designed for durability versus typical plastic mounts.
- Lower mounting position intended to reduce camera shake during movement.
- Easy to operate press type fixed removal for quick install and removal.
- Wide action-camera compatibility with models across GoPro, DJI Osmo Action, Insta360, and AKASO (as listed).
Cons
- Some setups may feel a bit loose on an NVG mount, with wobble addressed using added foam tape or padding.
- Fit can depend on the specific helmet NVG mounting plate and tolerances, so your mileage may vary.
What buyers think
Buyer-review evidence is limited but consistent on a few key points. Reviews tend to praise the mount’s metal build quality and how smoothly it slides into NVG mount plates. Several buyers describe installation as straightforward and emphasize that it holds a GoPro firmly once properly seated. The most notable theme is fit variability, where some users report slight looseness or wobble on their NVG mount and recommend adding foam padding (sometimes using included foam) to improve stability.
Who this mount is best for
- Helmet-mounted action camera users who want an NVG-plate solution instead of a standard rail or strap mount.
- Buyers prioritizing a metal mount feel and durability for tactical or rugged use (the mount is aluminum and built as a full-metal assembly).
- People aiming for steadier footage, since the mount is designed with a lower mounting position to help minimize camera shake.
Compatibility and mounting fit
This is an NVG helmet mount intended for helmets with NVG mounting plates. It is listed as compatible with action cameras including a range of GoPro Hero models (including Hero 13/12/11/10/9/8/7 and older variants as listed), DJI Osmo Action models (6/5 Pro/4/3 series), DJI Osmo Nano, Insta360, AKASO, and “most” other action cameras (within the same form-factor ecosystem).
The fit experience can depend on how snugly the mount seats into your specific NVG mounting plate. If your NVG mount has slightly different tolerances, expect you may need to take up slack with padding.
Pros and cons in real-world use
Why you might like it
- Sturdy feel: Reviewers repeatedly describe the mount as well-made with an all-metal build.
- Quick install and removal: The press type fixed removal design is meant for easy on and off.
- Lower profile positioning: The mount uses a lower mounting position to help reduce shake during motion.
What could be frustrating
- Potential wobble on some setups: When the mount does not feel fully tight in the NVG mount, adding foam tape or padding is mentioned as a practical fix.
- Not a universal “one-size” helmet fit: Since NVG mounting plates can vary, stability may require small adjustments in your build.
Performance expectations (and what to check)
Instead of promising a specific stabilization outcome, treat this mount as a mechanical fit solution. For the best results, check that the mount seats fully into your NVG mounting plate and that the camera is secured without play. If you notice any movement between the mount and the NVG plate, use the provided foam pieces and or additional padding to remove that slack.
Price and availability
It typically sits in the budget-friendly range for action camera helmet mounts. Availability can vary by retailer, so it’s worth checking the latest listing details before ordering.
Verdict
The Aluminum NVG Helmet Mount is a strong pick for action camera users with NVG-plate helmets who want a metal mount and a lower, steadier camera position. It is especially appealing if you prefer durable hardware over plastic mounts. The main thing to watch is fit, if your NVG mount setup is slightly loose, you may need extra padding to eliminate wobble.
FAQ
Does this work with any helmet that has NVG mounting plates?
It is designed for helmets equipped with NVG mounting plates, but exact fit can vary with plate design and tolerances. If it feels loose, padding may be needed to improve stability.
Will it fit my GoPro or DJI Osmo Action camera?
It is listed as compatible with a range of GoPro Hero models and DJI Osmo Action models (plus other action cameras in the same ecosystem). Double-check your exact camera model against the listed compatibility.
Is the mount secure, or does it wobble?
Most buyer feedback points to a solid metal build that holds the camera well. However, some buyers report slight looseness on their NVG mount, and they recommend adding foam tape or padding to prevent wobble.
How easy is it to install?
Installation is described as simple, using a press type fixed removal design intended for quick install and removal.
Is this mount made from aluminum?
Yes, it is built with aluminum (including an aluminum alloy structure) and finished for corrosion resistance.
Specifications
| Product Title | Aluminum NVG Helmet Mount, Tactical Helmet NVG Mount Compatible with GoPro Hero 13/12/11/10/9/8, DJI Osmo Action 6/5 Pro/4/3, Nano, Insta360, AKASO and Most Action Cameras |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Tripod & Monopod Accessories > Camera Mounts & Clamps |
| Brand | SKEZN |
| Manufacturer | GUOYU |
| Model Name | GY-NVG-005 |
| Model Number | NVG |
| Color | Silver |
| Item Weight | 0.13 Pounds |
| Compatible Devices | action cameras |
| Compatible Phone Models | Gopro Hero 7 |
| Mounting Type | Helmet Mount |
| Additional Features | Lightweight |
| Weight Capacity Maximum | 200 Grams |
| Water Resistance Level | Waterproof |
| Compatible with Vehicle Type | Motorcycle, Bicycle, ATV |
| Item Dimensions | 2.2 x 1.6 x 1.4 inches |
| Unit Count | 1.00 Count |
| Enclosure Material | Aluminum |
| UPC | 667016238669 |
| Mfr Part Number | NVG |
| Shape | Rectangular |
Recommended next
Dango Design Gripper Mount for GoPro/Osmo/Insta360 (Helmet Clamp Mount)
The Dango Design Gripper Mount uses a clamp-and-grip jaw system (no sticky adhesive) with a safety leash to secure GoPro-style cameras on motorcycle, dirt bike, and other helmets. It’s praised for fast attachment, a stable first-person view, and versatility, but it may not grip as well on very smooth or slick helmet surfaces, and it costs more than basic alternatives.
TELESIN 360 Backpack Mount Shoulder Strap Clip Holder Quick Release Adapter Base
The TELESIN 360 backpack mount is a hands-free action cam strap setup with a 360 rotating head and a quick-release tripod adapter base. It’s designed for backpacking and active POV shooting, and it swaps between mounted and handheld use faster than many strap mounts, with one notable caveat: the included clip has mixed durability expectations versus using your camera’s own clip system.
Cotton Carrier Adapter Plate
The Cotton Carrier Adapter Plate lets you connect your Cotton Carrier camera hub setup to a 1/4" threaded quick-release tripod plate. It is a practical add-on if you already own Cotton Carrier gear and want a faster tripod workflow, with solid build quality noted by buyers. The main caveat is that it is not a complete “tripod foot” by itself, so you may still need additional Cotton Carrier parts depending on your camera vest or hub configuration.
NEEWER Backpack Camera Clip Mount with Square QR Plate, Upgraded Safety Latch, Quick Release Camera Belt Clip Backpack Strap (GP67)
The NEEWER Backpack Camera Clip Mount lets you carry your DSLR or compatible camera on a backpack strap or belt, with a square Arca-type QR plate for faster on-the-move attachment and removal. It is a solid, compact option for hikers and travel shooters who want quick access and reduced neck strain, with the main tradeoff being a more closed, system-based QR/plate compatibility.