Legrand Wiremold C310 Cordmate III 10 Foot 11 Piece Cord Cover Kit, Organizer for Wall
Quick take
The Legrand Wiremold C310 Cordmate III is a self-adhesive cord cover kit that hides and organizes cables along a wall or baseboard, using a slim, paintable raceway style. It is a strong fit for anyone who wants a clean, low-profile cable route for common home setups like TVs and lamps. The main thing to plan for is that visible connector pieces may not match the white shade perfectly, and the adhesive works best when the mounting surface is properly prepared.
Pros and cons
Pros
- Self-adhesive installation is straightforward, with buyers describing “peel and press” setup.
- Holds cables securely, including thicker cables, once installed.
- Slim, paintable design helps it blend better with walls and décor.
- Includes multiple fittings (outside/inside elbows, T, flat elbows, couplings, and exit fittings) for routing changes.
Cons
- Connector pieces may be a slightly different white tone than the main channels.
- If you remove and reposition after sticking, it may be difficult to avoid disturbing paint.
- Breaking or separating the connecting parts by hand can be challenging, sometimes requiring cutting tools.
What buyers think
Buyer feedback for the Wiremold C310 Cordmate III centers on ease of use, adhesion strength, and the end result looking tidy. Many shoppers highlight that the kit is simple to assemble and can be cut to length, and that the adhesive tape generally holds well for everyday cord-hiding tasks. Several comments also describe the system as sturdy and durable after installation, especially compared with simpler, shorter cord-cover options. The most recurring “watch-outs” are aesthetic consistency (some fittings may look slightly different in shade) and installation timing, because repositioning after applying adhesive can cause issues on painted surfaces. A small amount of limited review evidence also points to the connecting pieces being harder to separate cleanly without tools.
What it is and who it’s for
The C310 Cordmate III is a wall-mounted cable raceway kit intended to conceal and organize multiple cords in a single covered channel. It includes several cord channels (45 inches long each, with 11 pieces total) and a set of corner and connector parts so you can route cables around turns and transitions. The slim profile is designed to keep cable runs low and visually streamlined, and the channels are paintable if you want the cover to blend into the room.
This kit is best for buyers who want:
- A cleaner look for TV cables, HDMI connections, lamp cords, and similar wall or baseboard runs
- A paintable raceway option rather than a bulky conduit
- A mostly DIY install that does not require drilling (self-adhesive mounting)
- Enough routing pieces to handle typical bends, corners, and cable exits
Key features and specs that matter in real life
Capacity and cable fit
The kit is built to hold up to five cords or cables. In practice, shoppers mention it works well for both standard cords and thicker cables, as long as the cable count and thickness fit within the channel.
Installation approach
Installation uses self-adhesive backing. Many buyers describe setup as easy and quick, with the process typically being align, peel, and press. If you are mounting on painted drywall, paneling, or similar surfaces, you will want to be deliberate about placement before committing to pressure, since repositioning after sticking can be problematic.
Paintable design
The channels are paintable, which can help reduce visibility once installed.
What’s in the kit
This kit includes multiple cord channels plus routing accessories, such as an outside elbow, inside elbow, T fitting, flat elbows, couplings, and exit fittings. That variety is helpful when you are not just running a straight line and need transitions.
Pros and cons (honest fit notes)
Pros for most shoppers
- Beginner-friendly installation: The peel-and-press method is repeatedly described as easy.
- Solid hold: Adhesive performance is a common positive theme.
- A neat finished look: Buyers often mention it looks good once installed and that corner pieces improve the overall system compared with shorter, simpler covers.
- Routing flexibility: The included elbow, T, and exit pieces make it more adaptable than a single straight run.
Where buyers may want to think twice
- Color matching can be imperfect: Some connector parts may appear a slightly different shade than the main channels.
- Repositioning is not ideal: If alignment is off, moving it after adhesion can risk damaging paint.
- Connection handling takes care: Some connecting pieces are not designed to be separated easily by hand, so you may want the right cutting tools if you need to rework.
Price and availability
This is a mid-range cord cover kit, and its value usually depends on whether the included channel length and fittings match your layout. If your cable route needs multiple turns or exits, the bundled accessories can be the difference between covering the job cleanly versus buying additional parts.
Alternatives to consider (based on your priorities)
If you are deciding between cord raceways, the best alternative depends on what you are optimizing for:
- If you want maximum color uniformity: Look for a system where all components are marketed as the same finish across channels and connectors, or plan to paint everything after installation.
- If you need a route that changes often: Consider cable management types that allow easier removal or adjustment than adhesive-only mounting.
- If you are managing many cables in one spot: Compare channel dimensions and capacity claims (like the “up to five cords” goal) to avoid a tight fit or frequent re-tucking.
Verdict
The Wiremold C310 Cordmate III is a practical cord cover solution for hiding multiple cables along baseboards or walls, with strong DIY appeal due to its self-adhesive setup and paintable, low-profile look. It is especially well-suited for typical TV, lamp, and power-adapter cable routes where you can plan alignment upfront. Consider it less ideal if perfect white matching across connectors matters to you, or if you expect to reposition the system after it is stuck to painted surfaces.
Frequently asked questions
Is the Wiremold C310 cord cover paintable?
Yes. The cord cover channels are designed to be paintable so you can match the installed color to your wall.
How does installation work?
It uses self-adhesive backing. You peel and press the cord cover in place, then you can cut the cover to your desired length if needed.
Will it hold thick cables?
The kit is intended for multiple cords and buyers report it can hold thicker cables well once installed, as long as the cables fit within the channel capacity.
Can I reposition it after sticking it down?
Repositioning can be tricky. If you move it after applying pressure, it may affect painted surfaces, so it helps to plan placement first.
Does it include corner and routing fittings?
Yes. The kit includes a mix of elbows, a T fitting, couplings, and exit fittings to handle turns and transitions.
Specifications
| Product Title | Legrand Wiremold C310 Cordmate III 10 Foot 11 Piece Cord Cover Kit, Organizer for Wall, Holds Up to 5 Cords or Cables, 45"L x 1.5"W, White (1 Pack) |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Wiremold |
| Manufacturer | Legrand Wiremold |
| Model Number | C310 |
| Color | Paintable |
| Material | Plastic |
| Item Weight | 7.2 Ounces |
| Product Dimensions | 45"L x 1.5"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 11 |
| UPC | 086698001697 |
| Unit Count | 1.0 Count |
| Global Trade Identification Number | 00086698001697 |
| Mfr Part Number | C310 |
| Warranty Description | Limited 1 Year Warranty |
| Built-In Media | Wiremold C310 Cord Mate III Kit |
| Item Type Name | On Wall Cable Management, Hide and Organize Up to 5 Cords and Cables at Home or Office |
| Enclosure Material | Plastic |
| Item Dimensions L x W | 45"L x 1.5"W |
| Installation Type | Self-Adhesive |
| Style Name | Cordmate III |
| Style | Cordmate III |
Recommended next
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
YECAYE 6 Pack Cable Management, Cord Organizer, Cable Organizer, Adhesive Mount Cord Organizer for Desk, No-Drill Desk Wire Management for Home Office, Baby proofing, Black
The YECAYE 6 pack desk cable management kit uses self-adhesive, J-channel raceways to hide and organize power and low-voltage cables under a desk or along a wall. It is designed for easy cable add or removal with an outward-facing opening, but it works best on smooth, even surfaces where the adhesive can bond reliably.
Legrand – OnQ in-Wall Cable Management Kit for Power & Low Voltage Cords (HT2102WHV1)
The Legrand On-Q HT2102WHV1 is an in-wall retrofit kit that combines a recessed power outlet with a brush-plate pass-through for TV and display cables. It’s a strong fit for buyers who want a cleaner wall-mounted setup, but it is still a real electrical-in-wall project and requires careful planning for where cables exit.
D-Line Cable Management Box, Power Strip Holder, Floor Outlet Hiders, Desk Cord Organizer, Cover TV Wires, Wire Storage, Extension Hider, Office Concealer for Cords, Baby Proof Cables - Large, Black
The D-Line large cable management box is a freestanding ABS plastic enclosure designed to hide a power strip plus extra cord runs for cleaner TV stands, desks, and other media or office setups. Buyers like the tidy look and cord security, with the main caveat being that it only fits power strips sized appropriately to the box dimensions.