Legrand - OnQ Cat 6 Network Interface Module (AC1068)

What buyers think

Buyer-review evidence for the On-Q AC1068 is generally positive, with recurring themes focused on usability and installation results. Shoppers commonly describe it as well made, a good way to clean up a home wiring closet, and “fits perfectly” when used in an On-Q cabinet. Multiple reviews also emphasize that terminating ports is straightforward, but they consistently advise paying attention to the specific termination layout when punching down to the terminals.

What this module does in a home network

This is an 8-port network interface module that helps connect Ethernet runs from around the house back to your router or switch. Instead of leaving cables loose or relying on ad-hoc connections, the AC1068 provides a centralized termination point using front-facing punchdown terminals and RJ45 connectors. That makes it well suited for connecting devices like computers, TVs, gaming systems, and network streaming gear to your wired home network.

Design and key specs to know

• Port count: 8 data ports for Cat 6 (or Cat 5e) Ethernet lines.
• Termination approach: front-mounted 110-IDC punchdown terminals paired with RJ45 jacks.
• Speed capability: supports gigabit networking (1 Gigabits Per Second specified).
• Standards and safety: UL listed and compliant with TIA/EIA 568-C.2.
• Size: approximately 1.5 in (L) x 2.9 in (W) x 6.41 in (H).

Installation notes that affect real-world success

The AC1068 is built for a structured wiring workflow, but it still requires careful termination. Buyers call out an important practical detail: the module’s punchdown layout is set up for a particular wiring scheme (often discussed as T568A vs T568B), so you need to terminate your cables and your corresponding ends consistently. If you wire one end differently than the other, you can end up with ports that don’t behave as expected.

Best for and who should avoid it

Best for

• Homeowners or installers building (or repairing) a structured wiring closet who want an organized Ethernet termination point.
• Anyone using (or planning to use) On-Q structured wiring enclosures and wants the matching Cat 6 interface module.
• Users who prefer a punchdown-based setup that still results in clean RJ45 connection points.

Who should avoid it

• Buyers who need a fully universal network module for non-On-Q enclosures.
• Anyone unwilling to do precise cable terminations and ensure consistent A vs B wiring across both ends.

Legrand pros and cons summary

If your goal is to centralize multiple Ethernet drops neatly inside an On-Q wiring cabinet, the AC1068 focuses on doing that with front-mounted punchdowns and RJ45 jacks. The main tradeoff is that success depends on correct termination scheme alignment, so it is best for buyers who are comfortable with structured wiring or follow a wiring plan carefully.

Alternatives to consider

If you are comparing options, think in terms of enclosure compatibility and termination style. Alternatives to this type of module usually fall into categories like:

• Other On-Q-compatible interface modules: choose a different Cat rating or port count if it better matches your cable runs and planned device mix.
• Non-On-Q punchdown patch solutions: consider these if you cannot use On-Q enclosures, but check space, mounting fit, and whether they support the punchdown-to-RJ45 workflow you want.
• Pre-terminated structured wiring panels: these can reduce on-site punchdown work, but may cost more and can be less flexible if you need to rework runs later.

Verdict

The Legrand On-Q AC1068 is a strong fit for structured home networking builds that use On-Q enclosures. Buyers tend to like the tidy installation and proper fit, and the module’s UL/TIA positioning supports confidence in the intended Ethernet cabling standards. Just treat termination layout (A vs B) as a must-check step, because that detail is where install quality is won or lost.

FAQs

Buy on Amazon

Recommended next

Hubs $7.95

★★★★★ 4.6/5 124,846 ratings

SABRENT 4 Port USB 2.0 Data Hub with Individual LED lit Power Switches [Charging NOT Supported] for Mac & PC (HB-UMLS)

The SABRENT HB-UMLS adds four USB 2.0 ports with individual on/off switches and per-port LED power indicators. It is a plug-and-play, hot-swappable hub for simple peripherals like mice, keyboards, and flash drives, but it does not support charging (and powered USB storage may need external power).

Hubs $9.99

★★★★★ 4.7/5 7,704 ratings

TP-Link Litewave 5 Port Gigabit Ethernet Switch (LS1005G)

The TP-Link Litewave LS1005G is a compact, fanless, unmanaged 5-port gigabit Ethernet switch that adds wired connections with plug-and-play simplicity. It’s a good fit for home setups and small offices that need a silent, reliable way to expand router ports, with the main limitation being that it’s unmanaged (no VLANs, no PoE).

Hubs $150

★★★★★ 4.4/5 606 ratings

MokerLink 26 Port Gigabit PoE Switch, 24 Gigabit PoE+ Ports, 2 Gigabit SFP Uplink

A fanless, 1U rackmount unmanaged PoE+ switch with 24 gigabit PoE+ ports and two gigabit SFP uplinks, designed for plug-and-play camera and access point deployments. It offers a strong 300W total PoE budget (802.3af/at) plus simplified features like port-based VLAN and an “extend” mode for longer runs at reduced speed, with a key limitation: it does not power 24V passive PoE devices.

Hubs $39.99

★★★★★ 4.6/5 215 ratings

j5create 7-Port Powered USB 3.0 Data Hub with 3.3 ft Extended Cable (JUH377)

The j5create JUH377 adds seven USB 3.0 ports to a laptop or MacBook using a single USB plug, and includes a 20W power adapter for devices that need more than bus power. It is a good fit for everyday peripherals, plus one fast-charging port for phones and tablets, but it is not designed to fully power multiple power-hungry external drives at once.