Lamicall Motorcycle Bike Phone Mount
Quick take
The Lamicall Motorcycle Bike Phone Mount is a handlebar phone holder built around a fast 1-second lock and release, so you can clip your phone in and out with one hand. It uses adjustable jaws to fit many 4.7 to 7-inch phones (up to a certain thickness) and includes non-slip silicone pads for stability on bumpy rides. The main thing to double-check is fit, especially if you use a bulkier case or a unique handlebar setup that changes the phone angle.
Pros and cons
Pros
- One-hand operation with quick lock and release for easy in-and-out access while riding.
- Adjustable clip width to fit a wide range of larger phones and case sizes.
- Handlebar clamp designed to grip securely, with non-slip silicone pads to help reduce movement.
- Designed to avoid covering the rear camera, which helps for photo or video use.
Cons
- Built with plastic construction, so it may not be the best choice if you expect impacts from a crash.
- Some bike or e-bike stem shapes may limit how well you can set the phone angle.
What buyers think
Buyer-review evidence points to consistently easy everyday use. Many users highlight the quick-release mechanism as the standout feature, especially for clipping the phone in and out while staying hands-free. Reviews also commonly mention that the mount holds phones securely over rough roads and bumpy conditions, with no noticeable shifting once the jaws are adjusted.
There is also positive feedback around compatibility with bulkier phone cases, with adjustable width helping the holder accommodate thicker protection. A smaller number of comments suggest that fit can vary depending on how your particular bike’s handlebar or stem geometry affects phone positioning. Overall, buyer sentiment supports this as a practical, well-built mount for frequent riders, with fit and mounting geometry being the main considerations.
What it is and how it works
This is a handlebar phone mount that clamps to your bike, motorcycle, scooter, stroller handle, or similar equipment. The core design idea is speed and convenience: you adjust the phone clip width, place your phone into the holder, then lock a latch for retention. When you want your phone, you open the latch and remove it quickly.
It’s also designed with a usability detail that riders often care about, rear camera clearance. That can make it simpler to record or take photos without needing to remove the phone from the mount.
Fit and compatibility: phones and handlebars
Phone size and case thickness
The holder is intended for phones in the 4.7 to 7-inch range. The clip width is adjustable, and the mount is designed for phones with a certain maximum thickness (up to the stated limit). This is particularly relevant if your phone uses a thick case, since many holders struggle with bulky protection.
If you run a case that adds significant bulk, treat this as a “measure first” mount. The adjustable width is a plus, but you still want your phone to sit securely without forcing the latch adjustment beyond its comfort zone.
Handlebar clamp size
The clamp is designed for handlebar diameters in the 0.59 to 1.57-inch range (15 to 40 mm). It also includes non-slip silicone pads to help the mount stay stable when the bike hits bumps.
If your bike has unusual stem geometry, the mount may still clamp, but phone positioning and angle can be less ideal. That’s the main reason you may need to experiment with where the mount sits for your setup.
Performance for real rides
Across buyer feedback, the most mentioned performance trait is stability once the phone is locked in. People describe the retention as adequate for bumpy roads, suggesting the jaws and latch design do their job when properly adjusted.
Another frequently noted benefit is convenience: the quick-release mechanism helps you avoid fighting with a traditional spring mechanism every time you want your phone. For riders who check navigation frequently, that time savings matters.
One practical limitation to keep in mind is material strength. The mount uses plastic, which should be fine for normal riding use, but it is not positioned like a crash-impact component.
Pros and cons summary
- Best for: riders who want fast one-hand phone access, need adjustable fit for larger phones and cases, and value rear-camera clearance for recording.
- Great if you ride often: frequent cyclists or scooter riders who remove and reinsert their phone multiple times during a trip.
- Potential mismatch: bikes with unconventional stem geometry where phone angle is constrained, or riders who require maximum durability in crash scenarios.
Verdict
The Lamicall Motorcycle Bike Phone Mount is a solid pick if your priority is quick, one-hand phone locking and release plus a wide adjustability range for larger phones and thicker cases. With non-slip silicone pads and buyer-reported stability on rough roads, it fits well into everyday riding use. Just confirm phone thickness and your handlebar geometry before buying, since angle and fit can vary across different bike designs.
If you want to check the most current price and availability, you can compare options here: Buy on Amazon.
FAQs
Will this mount fit a phone with a bulky case?
It’s designed with adjustable clip width for the stated 4.7 to 7-inch phone range, including phones with added protection. If your case is especially thick, verify it stays within the mount’s thickness and width limits for a secure lock.
What handlebar size does the clamp support?
The clamp is intended for handlebar diameters of 0.59 to 1.57 inches (15 to 40 mm). If your bars fall within that range, it should clamp properly.
Does the mount block the rear camera?
No, it’s designed so the rear camera area is not covered, which makes it easier to take photos or record while your phone is in place.
Is it easy to install and remove while riding?
Buyers emphasize the quick-release latch and one-hand operation. After you install and adjust it, removing and reinserting the phone is intended to be fast.
How stable is it on bumpy roads?
Review themes commonly describe the phone as staying in position during rough rides when the mount is properly adjusted and locked. If your bike’s geometry affects how the phone sits, you may need to adjust the mount position for the best angle.
Specifications
| Product Title | Lamicall Motorcycle Bike Phone Mount - [1s Quick Release] Bike Cell Phone Holder Clip, Bicycle Scooter Handlebar Clamp, Gifts for iPhone 17 16 15 14 Pro Max, Galaxy S25 S24 Ultra, 4.7-7" Phones, Blue |
|---|---|
| Category | Automotive > Motorcycle & Powersports > Accessories > Electronics > Electrical Device Mounts |
| Brand | Lamicall |
| Manufacturer | Lamicall |
| Model Number | BP12-EU-BU |
| Color | Blue |
| Material | Plastic, Silicone |
| Item Weight | 0.22 Kilograms |
| Brand Name | Lamicall |
| Manufacturer Part Number | bp12 |
| Included Components | bike phone holder |
| Manufacturer Warranty Description | 2 Year Warranty |
| Unit Count | 1.0 Count |
| Material Type | Plastic, Silicone |
Available variants
Color
- Red
- Blue
Recommended next
Lamicall Bike Phone Holder, Motorcycle Mount
The Lamicall bike and motorcycle phone holder is a clamp-style handlebar mount designed for 4.7 to 6.8-inch smartphones (up to 15mm thick, including most cases). It’s built around a corner-grip design with silicone pads, plus a red rear lock for added security on bumpy rides. The main caveat is fit, especially if your phone plus case is near the maximum thickness.
Lamicall Motorcycle Phone Mount, Bike Phone Holder (Metal Safety Lock)
The Lamicall Motorcycle Phone Mount is a universal handlebar phone clamp designed for 4.7 to 6.8-inch phones, with a 360-degree adjustment ball and a metal safety lock for extra steadiness on the ride. It’s positioned as quick to install (no tools) and uses rubber pads to help prevent scratches and slipping, but the fit depends on your phone size and case thickness.
ZIDIYORUO UTV Whip Light Mount for 1.75"-2" Roll Cage Bars
A 2-pack clamp-style whip light and flag mount made from CNC-machined 6061 aluminum, designed for 1.75" to 2" roll cage bars. The mount rotates 360° for positioning and includes hardware for quick installation, with reviews pointing to a solid, secure hold for off-road use when bar size matches.
Roam Universal Black Net Bike Phone Mount Holder, 360° Rotation
The Roam Universal net phone mount is a tool-free handlebar mount designed for phones up to about 3.6 in wide, with a 360-degree ball-socket style rotation for landscape or portrait GPS viewing. It’s a solid pick for cyclists and riders who want full phone access and reduced vibration on rough roads, with the main caveat being that bulky/wallet cases may prevent the included corner supports from reaching properly.