for Ring Camera Power Cord, Power Adapter Compatible with Stick review
Quick take
This 2-pack power cord and adapter kit is made for compatible Ring battery cameras, including Ring Stick Up Cam (2nd/3rd gen) and Ring Spotlight Cam Battery. It uses a DC power approach (6V, 2A, 12W) and includes both a cable and adapter pieces, plus waterproof cable protection. The main caveat is that it is intended to support battery mode plug-in use, not necessarily the camera’s higher-current wired power mode.
Pros and cons
Pros
- Designed for Ring Stick Up Cam (2nd/3rd gen) and Ring Spotlight Cam Battery, both battery and plug-in setups.
- Outdoor-friendly waterproof connection design, with a spiral cover cap and a built-in waterproof ring.
- Includes a 16 ft (5 m) cable plus the needed adapter pieces and cable clips for outdoor and indoor runs.
- Safety protections are listed (over-current, over-voltage, overload, overheat, and short-circuit protection).
Cons
- May not provide enough power for Ring’s wired mode, based on common buyer feedback.
- Compatibility is specific to supported Ring battery camera models, so it is not a universal power solution.
What buyers think
Across the available reviews, the most consistent themes are straightforward setup, enough cable length for practical outdoor placement, and dependable battery charging when the camera is configured for the intended battery-based power mode. Multiple buyers describe clean, easy installation and report that the battery stays topped off. At the same time, buyer feedback also highlights an important limitation: the kit is not treated as a substitute for wired-mode operation, and the camera may reject the power source if you attempt to run it in a mode that expects higher current.
Who this power cord kit is best for
- Homeowners and renters who want an easy way to power compatible Ring battery cameras without relying on a solar panel setup.
- Buyers installing cameras outdoors who need a longer run (16 ft) with waterproof protection at the connection point.
- People adding extra coverage who want a 2-pack so they can handle more than one camera without hunting for separate cables.
Key compatibility and setup considerations
Before purchasing, match the kit to your exact camera model and power settings. This adapter/cable approach is built for Ring battery cameras such as Ring Stick Up Cam (2nd/3rd gen battery/plug-in) and Ring Spotlight Cam Battery. Reviews also point to a setup detail that matters: for best results, configure the camera to use the battery-mode style power approach, rather than expecting the kit to function in wired mode.
Design, cable length, and included accessories
The kit includes an adapter plus cabling, specifically a 16 ft (5 m) Type C plug cable, along with a Type C to DC plug adapter cable. It also comes with cable management accessories for both outdoor and indoor routing, including cable clips, and it lists a wall-mount style approach for the power adapter.
Waterproofing and safety
The power cable’s connection is described as waterproof, using a spiral cover cap and a built-in waterproof ring. For electrical safety, the kit lists multiple protections, including over-current, over-voltage, overload, overheat, and short-circuit protection. If you are running power outdoors, these items are the kinds of features you want to see on a plug-in cable set.
Power output you should know about
The adapter is specified for 6 volts, 2 amps (12 watts). That aligns with battery-oriented charging use cases. If your goal is to run the camera as a fully wired device, you may need a different power approach, since buyer feedback suggests this kit is not intended for wired-mode current demands.
Pros and cons summary
- Buy it if: you have a compatible Ring battery camera and want a longer, waterproof-ready plug-in cable solution to keep the battery topped off.
- Skip it if: you specifically need wired-mode power operation or your camera configuration requires higher current than this 6V, 2A kit provides.
Is it worth it?
This is a solid choice for the right Ring camera setup, especially if you value waterproof connection protection, a longer 16 ft cable, and a 2-pack option for multi-camera locations. The decision hinges on one practical factor: if you are trying to replace or supplement a solar-style battery charging setup, this kind of kit tends to fit. If you need true wired-mode behavior, look for a power solution built for that requirement.
Price and availability
It is currently listed as in stock. For the most accurate cost and current package options, check the live listing.
FAQ
- Will this power cord work with Ring Stick Up Cam (2nd/3rd gen) and Ring Spotlight Cam Battery?Yes, it is designed for compatible Ring Stick Up Cam (2nd/3rd gen) battery/plug-in and Ring Spotlight Cam Battery setups.
- Is it waterproof for outdoor use?The connection is described as waterproof, using a spiral cover cap and a built-in waterproof ring.
- Does it work for wired mode or only battery mode?Buyer feedback indicates it is meant for battery-mode style operation, and the camera may reject it if you try to run in wired mode.
- How long is the cable?The kit includes a 16 ft (5 m) Type C plug cable.
- What is included in the 2-pack?You get power adapters and the associated cables/adapters, plus cable clips for outdoor and indoor routing.
Specifications
| Product Title | for Ring Camera Power Cord, Power Adapter Compatible with Stick Up Cam 2nd/3rd Gen Battery/Plug in, Ring Spotlight Cam Battery, 16Ft Long Cable, Waterproof (2Pack) |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Cables & Cords |
| Brand | Kakajuelo |
| Manufacturer | kakajuelo |
| Model Number | XSC - 0502000AUSU |
| Color | 2Pack |
| Connector Type | dc plug |
| Compatible Devices | Ring Stick Up Cam 2nd/3rd Gen Battery, Ring Spotlight Cam Battery |
| Compatible Phone Models | Compatible with Ring Stick Up Cam 2nd/3rd Gen Battery, Ring Spotlight Cam Battery |
| Additional Features | Camera Power Cord, Compatible with Ring Stick Up Cam 2nd/3rd Gen Battery, Ring Spotlight Cam Battery |
| Input Voltage | 6 Volts |
| Amperage | 2 Amps |
| Wattage | 12 watts |
| Output Current | 2 Amps |
| Output Voltage | 6 Volts |
| Power Source | Corded Electric |
| Main Power Connector Type | 2 Pin |
| Portable | No |
| Number of Power Levels | 1 |
| Power Plug | Type C |
| Current | DC |
| Wired Charging Connector Type | USB Type C |
| Plug Type | Type C |
| Mounting Type | Wall Mount |
| Connectivity Technology | Camera Power Cord |
| Built-In Media | Power adapter, 16ft Type C Plug cable, Type C to DC Plug adapter cable, Circle cable clips with steel nail (outdoor), Plastic cable clips (indoor), Camera Power Cord |
| Mfr Part Number | Camera Power Cord |
Available variants
Color
- 2Pack
Recommended next
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A lightweight, braided 3-in-2 charging cable that combines Apple Watch magnetic charging with USB-C and Lightning connectivity for travel and car use. Buyers like the convenience of one cable for multiple devices and report solid everyday charging, but the magnet strength can be less reliable when the watch charger is moved around.
ienza USB PC Data Transfer Battery Charger Cable for Select Sony Cybershot DSC-H200/DSC-H300/DSC-W370/DSC-W800/DSC-W830/DSC-W310
This ienza USB-A camera cable is designed to connect compatible Sony Cybershot models for data transfer and charging. The biggest buying caveat is choosing the correct connector version for your specific camera port, since this cable is only for a defined list of models.
XRDS -RF 12G SDI Cable 200FT, SDI Video Cables 3G/6G/12G 75ohm BNC Male Cable
The XRDS -RF 12G SDI Cable (200ft) is a long 75-ohm, male-to-male BNC SDI cable built for HD/3G/6G/12G SDI workflows, with support for 4K UHD class video. It’s a practical pick for security camera and SDI converter or recorder setups that need a stable, shielded connection over distance.
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A compact 3-in-2 travel charging cable from xiwxi that combines USB-C, Lightning, and a magnetic Apple Watch charging connector in a single 6-ft cord. It’s designed for car, office, dorm, and trip backups, with braided build quality and multiple safety protections, but it works best when your watch charger is positioned correctly and charging speeds still depend on your adapter and device support.