XRDS -RF 12G SDI Cable 200FT, SDI Video Cables 3G/6G/12G 75ohm BNC Male Cable
Quick take
The XRDS -RF 12G SDI Cable is a 200-foot, 75-ohm male-to-male BNC SDI cable made for HD and higher-generation SDI signal chains (3G, 6G, and 12G) used in surveillance and professional video gear. It emphasizes high data throughput and shielding to support stable transmission over longer runs, but buyers will want to match the cable to the right 75-ohm SDI system and confirm they truly need 12G-grade capability.
Pros and cons
Pros
- Supports HD/3G/6G/12G SDI, with a 12Gbps data transfer rate and up to 4K UHD class video support.
- 75-ohm BNC male connectors designed for digital video SDI applications.
- Long 200ft length option, useful when cameras, recorders, and monitors are far apart.
- Built with durable materials and advanced shielding to help reduce interference and support reliable connections.
Cons
- It is an SDI coax BNC cable, not a device-to-phone or non-SDI connection solution.
- Best fit depends on system matching, especially impedance (75-ohm) and the specific SDI interface at each end.
What buyers think
Buyer-review evidence is limited in detail, but the available feedback is consistently positive about basic compatibility and signal performance in real setups. Multiple reports describe the cable working as expected for SDI interconnect and longer runs, with users noting good build quality for their intended equipment chain. A small amount of review commentary is unrelated to the cable’s SDI function (for example, expecting it to connect to a phone), which suggests the main purchasing caveat is confirming SDI/BNC compatibility rather than a recurring cable defect.
What this cable is for
This is a long-run SDI coax cable designed to carry professional video signals across distances where you need a proper BNC interface. It’s aimed at common security and AV configurations that use SDI converters, matrix systems, recorders (DVR/NVR SDI workflows), and monitors that accept SDI over 75-ohm BNC.
Key specs that affect real-world use
12G SDI support for modern signal chains
The cable is rated for 12G-SDI and supports HD, 3G, and 6G SDI. In practical terms, that makes it a fit when your system can output newer higher-generation SDI formats, including 4K UHD class video requirements.
75-ohm BNC, male-to-male connections
Impedance matching matters for SDI coax. This model is built around 75-ohm BNC connectors (male-to-male), which is the common standard for SDI video cabling. The connectors are made from brass copper with nickel plating, a detail that targets durability at the connection points.
Long length, designed for stable transmission
At 200 feet (200.0 feet listed), the cable is intended for situations where you cannot keep gear close together. The construction emphasizes shielding and low attenuation, which are the two main cable traits that can matter on longer coax runs (especially in environments with potential interference).
Pros and cons for different buyers
Best for
- Security camera and SDI surveillance builds where you need a long 75-ohm BNC SDI run.
- Installers or buyers using SDI converters, SDI recorders, or SDI monitors that require 3G/6G/12G-capable coax.
- Anyone who wants one cable that can cover multiple SDI generations in the same workflow.
Who should avoid it
- People looking for an HDMI, DisplayPort, Ethernet, or phone-compatible cable. This is a BNC SDI coax cable.
- Buyers who cannot confirm 75-ohm SDI compatibility at both ends (or who actually need a different impedance standard, such as older analog coax expectations).
Price and availability
Price can change, and availability can be limited. If you are planning an installation with a specific timeline, it’s smart to check the latest listing status before ordering, especially since long-length cables are sometimes stocked in smaller quantities.
Verdict
The XRDS -RF 12G SDI Cable (200ft) is a practical, purpose-built choice for SDI video setups that need long-distance 75-ohm BNC connections and 3G through 12G support, including 4K UHD class video. It looks like the right direction for surveillance and professional SDI interconnect use, as long as you confirm your gear uses SDI over 75-ohm BNC (and not a different interface).
FAQ
Is this an SDI cable, or does it work for HDMI or Ethernet?
It is an SDI coax cable with BNC male connectors. It is not an HDMI, DisplayPort, or Ethernet cable.
What SDI formats does it support?
It’s designed to support HD, 3G, 6G, and 12G SDI workflows, with support for 4K UHD class video resolutions.
Is the impedance 75 ohm?
Yes, it is built as a 75-ohm 12G SDI BNC cable. That impedance match is important for typical SDI coax installations.
Does 200 feet mean it will automatically work over any distance?
Long-length coax can be suitable for SDI, but real performance still depends on your specific signal generation, equipment, and run environment. This cable is intended for stable transmission over distance (shielded, low attenuation), but it is best to ensure system compatibility end-to-end.
Will it connect to a phone?
No. If your goal is phone connectivity, you would need the appropriate conversion and interface for that device. This cable is for SDI BNC video systems.
Is it male-to-male?
Yes, it is a male-to-male BNC cable, meaning the connectors are male on both ends.
Specifications
| Product Title | XRDS -RF 12G SDI Cable 200FT, SDI Video Cables 3G/6G/12G 75ohm BNC Male Cable Supports HD-SDI/3G/6G-SDI/4K/8K for Video Security Camera SDI Converter |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Cables & Cords |
| Brand | XRDS -RF |
| Manufacturer | XRDS -RF |
| Color | Black |
| Connector Type | BNC |
| Cable Type | SDI |
| Compatible Devices | Video Camera, Recorder, Monitor, Professional Equipment |
| Other Special Features of the Product | low attenuation |
| Compatible Phone Models | No Compatible Phone Models |
| Ethernet Cable Category | Cat 8 |
| Connector Gender | Male-to-Male |
| Data Transfer Rate | 12 Gigabits Per Second |
| Number of Pins | 2 |
| Frequency | 12 GHz |
| Recommended Uses For Product | video production, broadcasting |
| Indoor Outdoor Usage | Indoor |
| Item Shape | Round |
| Brand Name | XRDS -RF |
| Customer Package Type | Physical Product |
| Model | XRDS-SDI-200FT-12GBNC |
| UPC | 639394179438 |
| Part Number | RG6-BNC-JJ-200FT-black |
| Unit Count | 200.0 Feet |
| Number of Items | 1 |
| Special Feature | low attenuation |
Available variants
Size
- 2FT
- 3FT
- 250FT
- 1FT
- 50FT
- 300FT
- 15FT
- 20FT
- 35FT
- 75FT
- 150FT
- 6FT
- 200FT
- 10FT
- 25FT
- 100FT
Number Of Items
- 1
- 2
Recommended next
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable,Portable Multi Charging Cable for Apple Watch, iPhone 17‑11,Samsung S26,Car,iPad-6FT
A compact 3-in-2 charging cable that combines a USB-C/iPhone (Lightning) charging connection with a magnetic Apple Watch dock for one-cable travel charging. It’s designed for everyday portability (about 6 ft) and includes over-current, over-voltage, short-circuit, and over-temperature protection, but magnetic stability can be less ideal when you’re actively moving.
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A compact 3-in-2 charging cable that combines USB-C, Lightning, and a magnetic Apple Watch puck-style connection for travel. It’s designed for one-cable convenience with braided durability and safety protections, but the watch magnet may be best when your watch is resting rather than on the move.
Travel Essentials for Apple Watch Charger,iPhone Charger,3 in 2 Type C/Lightning/Magnetic Travel Charging Cable
A compact 3-in-2 charging cable that combines USB-C and Lightning-style charging with a magnetic Apple Watch charger, designed for travel and “one-cable” convenience. It’s built with a nylon braided exterior and aluminum connectors, but the Apple Watch magnet strength and charging speed can vary based on your adapter and setup.
SMALLRIG Ultra Slim 4K Adapter Cable (D to A), Micro-Sized Ports Male to Full-Sized Ports Female
A compact HDMI adapter that converts a camera’s micro HDMI (Type D) to a full-size HDMI (Type A) connection, supporting up to 4K@60Hz. It’s designed for camera rig users who want a sturdier setup and less strain on fragile micro HDMI ports, but the short, ultra-slim design can limit mounting and the build feels more basic than premium cables.