Delamu Cord Hider, Cord Covers for Wires on Wall, One-Cord cable cover kit
Quick take
Delamu’s one-cord cable hider is a self-adhesive, snap-together PVC raceway kit designed to conceal a single standard-size wire along walls or floors. It’s aimed at quick DIY cord cleanup for wall-mounted TVs, desks, and similar setups, with paintability and cut-to-fit flexibility. The main caveat is sizing, the internal channel is meant for one typical wire, so thicker cables may not slide in cleanly.
Pros and cons
Pros
- Self-adhesive installation (no drilling), quick snap connection for straight runs and corners.
- DIY friendly, paintable and cuttable to match your layout.
- Designed to manage one cord (and possibly very small pairs), with a kit that includes straight sections plus corner and a T-connector.
- PVC construction with UL94 V-0 flammability testing for improved flame retardancy versus ordinary plastics.
Cons
- Not intended for very large cables, internal dimensions limit cable thickness and width.
- The kit comes in multiple short pieces, so longer runs require planning to cover seams.
- Adhesive performance can depend on the surface texture, so it may be less forgiving on challenging walls or uneven mounting areas.
What buyers think
Buyer-review evidence is consistently centered on ease of use and visible results. Many reports highlight that installation is fast, the adhesive backing helps the cover stay in place, and the snap system makes assembly straightforward. Review themes also mention a clean, low-profile look that helps reduce the “dangling cord” clutter under wall setups. Where discussions get specific, buyers often frame the fit as good for a single typical cable, with mention that the channel size works well for one thicker power cord or small bundles like slim video/data leads.
Buyer-review evidence is limited in terms of durability over long periods, but the recurring themes suggest this is a practical, day-to-day cord hiding solution rather than a complex retrofit.
What it is and why it’s useful
This Delamu cord cover kit is built for routing and concealing exposed cables that you do not want visible on wall surfaces. Typical use cases include:
- Wall-mounted TV power cords and device connections
- Desk or workspace wiring where a cable can trail down the wall
- Room corners where cords need a tidy path rather than a loose cable line
Instead of hiding cables behind furniture or running them through the wall, the raceway gives you a surface-mounted channel that looks more intentional. If your goal is a cleaner look with minimal tools, this style of cable hider is designed for that.
Design and install: built for quick DIY
Snap-together raceway layout
The kit includes multiple straight raceways plus corner pieces and a T-connector. That matters because most real setups are not a single straight line. You can assemble sections to follow a typical wall route, then route one cable through the channel.
Self-adhesive mounting
Installation is designed around double-sided tape and an easy “press and lock” process, without drilling. In user feedback, adhesive strength and “stays put” performance are recurring positives, with many buyers stating it held securely after applying.
Paintable and cuttable for customization
If the included lengths do not perfectly match your wall run, the cover can be cut (and you can also paint it) to help it blend in. That flexibility is especially useful when your measurements land between kit sections.
Specs that affect fit: the one-cord sizing limit
The product is specified as a “one cord” hider. The internal size is listed as W0.45 in x H0.33 in, which effectively sets the maximum comfortable cable footprint.
- Best fit: one standard-size cord, plus possibly very small additional wires (only if they both remain within the channel size).
- Potential mismatch: unusually thick cables, bulky adapters, or cords that do not fit the internal channel dimensions without forcing or deforming the cover.
Material-wise, it uses PVC, and it is tested to UL94 V-0 flammability performance, which is relevant for everyday safety considerations around wall-mounted electronics.
Pros and cons, for the right buyer
Who this is best for
- You want a simple cord cover for a wall-mounted TV or similar setup, especially if you prefer not to drill.
- Your cable path includes corners and a need for a branch or connection point, where a T-connector helps.
- You are working with a single standard wire whose width and height fall within the internal channel limits.
- You value a tidy, paintable finish that can better match your wall.
Who should consider another option
- Your cables are thick or irregularly shaped and may not fit the stated internal channel size.
- You need a long, continuous run with minimal seams and do not want to plan around multiple short pieces.
- Your mounting surface is highly textured or uneven, and you need maximum adhesive consistency without surface prep.
Performance expectations based on review themes
- Cleanup and appearance: Buyers commonly report noticeably cleaner-looking wall setups once the cover is installed.
- Assembly experience: The snap-connection design is frequently described as straightforward.
- Stability: Many reviews mention the adhesive holding after application, though results can vary by surface type.
- Routing flexibility: The included straight sections, corners, and T-connector align with typical home cable layouts.
Price and availability
Pricing and availability can change over time. If you want the most current cost for the Delamu cord hider kit, check the live listing for updates.
FAQs
How many cords does this cord hider hold?
It’s designed as a one-cord cable hider with an internal channel size of W0.45 in x H0.33 in. Very small additional cables may fit only if they stay within the channel dimensions.
Does it require drilling to install?
No. It uses self-adhesive mounting for installation, along with a snap connection design for assembling sections.
Can I cut the cable cover to fit my wall run?
Yes. The kit is described as DIY cuttable using tools like sharp scissors or a saw, so you can trim it for shorter sections and fit it to your layout.
Is it paintable?
Yes. The cover can be painted to better match your wall color for a less noticeable look.
What is the internal size and why does it matter?
The internal size is W0.45 in x H0.33 in. That dimension determines what cable thickness and width will fit without forcing, which is critical for avoiding a poor seal or a cover that won’t close properly.
What material is it made from, and is it flame retardant?
It’s made from PVC and is tested to UL94 V-0 flammability performance, which is intended to indicate higher flame retardancy than ordinary plastics.
Is this good for TV cords on a wall?
Yes. It’s commonly used for tidy TV and electronics cord management, especially when you have a single standard-size wire path that includes corners or a branch point.
Specifications
| Product Title | Delamu Cord Hider, Cord Covers for Wires on Wall, One-Cord Cable Hider, Self-Adhesive Wire Hiders Wire Covers for TV Cords on Wall, Easy Mount Cable Cover Management Kit, 6X W0.59 H0.4in, White |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | Delamu |
| Manufacturer | delamu |
| Model Number | CC03-6 |
| Color | White |
| Material | Polyvinyl Chloride |
| Product Dimensions | 85"L x 0.59"W |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Number of Pieces | 6 |
| Unit Count | 7.85 Feet |
| Mfr Part Number | CC03-6 |
| Warranty Description | no |
| Enclosure Material | Polyvinyl Chloride |
| Item Dimensions L x W | 85"L x 0.59"W |
| Installation Type | Self-Adhesive |
| Style Name | Cord Hider |
| Style | Cord Hider |
Available variants
Color
- White
- Black
- DarkWood
- Grey
- CherryWood
- Beige
- Brown
Size
- 315in L x 0.95in W x 0.55in H
- 85in L x 0.59in W x 0.4in H
- 142in L x 0.95in W x 0.55in H
- 142in L x 0.59in W x 0.4in H
- 85in L x 1.18in W x 0.67in H
- 85in L x 0.95in W x 0.55in H
- 315in L x 1.18in W x 0.67in H
- 472in L x 0.59in W x 0.4in H
- 94.5in L x 1.18in W x 0.67in H
- 315in L x 0.59in W x 0.4in H
- 472in L x 1.18in W x 0.67in H
- 142in L x 1.18in W x 0.67in H
- 472in L x 0.95in W x 0.55in H
Recommended next
Delamu 236in Cord Hider, Single-Wire Cord Covers for Wires on Wall
The Delamu one-cord cable hider kit is a snap-on, paintable PVC raceway system designed to cleanly conceal a single cable run around corners. It uses strong double-sided tape (no drilling), and it’s best for slimmer, single-wire jobs like speaker wire, lamp cords, phone/fax lines, or one Ethernet cable.
Delamu Cord Hider, 157in Wire Covers for Cords on Wall
The Delamu Cord Hider (157-inch wall-mounted cable raceway) is designed to conceal 2 to 3 cords in a clean, paintable channel. It installs with an attach-and-snap design and can use adhesive tape or screws, but the adhesive tape is strong enough to risk paint damage if you remove it later.
Yecaye TV Cord Hider, 42in Cord Cover, Large Cable Hider, Wire Covers for 4 Cords (White)
The Yecaye 42-inch TV cord hider is a drill-free, self-adhesive cable raceway designed to clean up visible HDMI, power, and Ethernet runs under wall-mounted TVs. Buyers like how quickly it installs, how well it snaps shut, and how it improves the overall look, with the main caveat being that it’s only as effective as your cable fit and wall adhesion.
EVEO Cable Hider Wall - 153" Wall Cord Hider (White)
The EVEO Cable Hider Wall is a self-adhesive cable raceway designed to conceal messy cords along baseboards, desks, or behind a wall-mounted TV. It’s cuttable, paintable, and uses a snap-on cover, making it a practical way to improve both the look and day-to-day safety of exposed cables, with the main tradeoff being how strongly the adhesive bonds to the wall.