Davis Echomastrer Standard Radar Reflector
Quick take
The Davis Echomastrer Standard Radar Reflector is a marine radar reflector built with heavy-gauge aluminum reflective plates, designed to improve how well your vessel stands out to radar. It is generally described as simple to assemble and use, but review evidence is mixed on completeness and mounting-hardware expectations. If you plan to mount it using specific hardware, double-check what is included before ordering.
Pros and cons
Pros
- Heavy-gauge marine-grade aluminum plates with 13.2 yd² of reflective surface (12-1/2 inch diameter).
- Tough corner-latch design intended to help maintain a minimum angle error.
- Designed to be straightforward to assemble, use, and demount.
- Includes a booklet with radar reflector guidance and detailed instructions.
Cons
- Some buyers report missing segments or incomplete content, so completeness checks matter.
- Mounting hardware expectations can be confusing, which may require you to source hardware separately depending on your setup.
- Overall review evidence is limited (low review count), so patterns are harder to confirm.
What buyers think
Buyer-review evidence is limited, but the themes that do show up tend to focus on assembly experience, perceived quality, and whether the item arrived complete for the buyer’s intended installation. Some reviews describe the reflector as working well after straightforward setup, while others raise concerns about missing segments and about whether mounting hardware was included when shown in images or described in a way that created confusion.
What the Davis Echomastrer Standard radar reflector is for
A radar reflector helps other vessels and shore-based radar “see” your craft more clearly, especially in conditions where radar returns would otherwise be weak. This model is built for compatibility with marine radar systems, and it uses reflective plates intended to create stronger radar returns.
Key design features that affect performance
Reflective surface area
The reflector uses a 12-1/2 inch heavy-gauge marine-grade aluminum plate approach, providing 13.2 yd² of reflective surface. In practical terms, more reflective area can translate into a stronger chance of being detected, assuming proper mounting and aim.
Corner-latch and angle error considerations
The reflector’s injection-molded corner latches are designed to be captive and to help assure a minimum angle error. Since reflectors depend on orientation, hardware stability and alignment matter as much as raw size.
Assembly and on-vessel handling
It is designed to be simple, with instructions included in a booklet. The assembly, use, and demount experience matters if you swap cruising areas, store the reflector seasonally, or prefer to remove it when not in use.
Davis Echomastrer Standard radar reflector pros and cons in plain English
When it makes the most sense
- You want a reflector with substantial reflective surface: The 13.2 yd² figure is a central reason to consider this style and size.
- You prefer a kit-style approach: The included instructions and “simple to assemble” positioning suggest it is meant to be manageable for typical boat owners.
- You care about alignment stability: The corner-latch design is meant to reduce angle error, which is relevant to consistent radar returns.
When you might want to look elsewhere
- Your installation depends on included mounting hardware: Some buyers reported that mounting hardware shown in images was not included, so confirm what’s in the box relative to your mount plan.
- You need high confidence in completeness out of the box: There are reports of missing segments. If you cannot troubleshoot or replace parts easily, consider planning for that possibility.
Price and availability
Pricing can vary, and availability appears constrained at times. To avoid paying more than necessary, check the latest listing price and confirm current bundle contents (especially mounting hardware) before you buy.
Verdict: is the Davis Echomastrer Standard radar reflector worth it?
The Davis Echomastrer Standard Radar Reflector is a solid fit if you are looking for a marine radar reflector with a relatively large reflective surface area and a design focused on maintaining angle accuracy. The biggest buyer caveats are not about reflector concept, they are about practical installation expectations. Because some buyers report missing content and some mention mounting-hardware confusion, it is worth verifying included parts and planning for mounting accordingly.
FAQ
What size radar reflector is this?
It is a 12-1/2 inch diameter reflector design, with 13.2 yd² of reflective surface.
Is this reflector easy to assemble?
It is marketed as simple and designed for easy assembly, use, and demount, and some buyers describe setup as straightforward.
Does it include mounting hardware?
There is some buyer confusion about mounting hardware inclusion. If your installation requires specific mounting hardware, check the bundle details carefully before purchasing.
What should I do if parts arrive missing?
Some reviews mention missing segments. If that happens, the practical next step is to contact the seller or retailer support quickly to resolve the missing component issue.
Is this compatible with my marine radar system?
The reflector is intended for use with marine radar systems. If you are unsure, compare your radar system requirements with the reflector’s intended compatibility.
Specifications
| Product Title | Davis Echomastrer Standard Radar Reflector |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Radar Systems |
| Brand | Davis Instruments |
| Manufacturer | Acr Electronics |
| Model Number | 472691 |
| Item Weight | 2 Pounds |
| Compatible Devices | Marine Radar Systems |
| Power Source | Battery Powered |
| UPC | 011698015207 |
| Mfr Part Number | 152 |
| Built-In Media | Davis Echomastrer Standard Radar Reflector |
| Unit Count | 1.0 Count |
| Item Type Name | Davis Echomastrer Standard Radar Reflector |
| Warranty Description | Warranty |
| Number of Items | 1 |
| Number of Packs | 1 |
Recommended next
Raymarine i60 Wind System with Masthead
The Raymarine i60 Wind System with Masthead is a dedicated sailboat wind instrument designed to show wind speed and direction (including Beaufort, max wind, VMG, and tack) and can integrate with other Raymarine instruments for apparent and true wind. Strong buyer feedback highlights easy integration and readable display, with the main caveat being that wind transducer performance can be sensitive to water exposure at the masthead.
Simrad GO Chartplotter and Fish Finder, with Transducer and Radar Options, Preloaded C-MAP Discover Chart Card
The Simrad GO9 XSE bundle pairs a 9-inch multifunction display with an 83/200 kHz HDI transducer package and a Halo20 solid-state radar option. It is a strong all-in-one choice for boaters who want chartplotting, CHIRP/DownScan-style structure viewing, and radar overlay in one touchscreen system, with NMEA 2000 integration and wireless mirroring. The main caveat is that some buyers report bundle completeness or installation-related issues, so plan for proper setup and verify what cables and media come in the box for your install.
Furuno 1815 8.4 Color LCD RA Radar (19" 4kW Dome)
The Furuno 1815 is a standalone marine radar package built around an 8.4-inch color LCD and a low-profile 19-inch 4 kW radome antenna. It emphasizes easy setup, quick readability with true-color style viewing modes, and Fast Target Tracking for up to 10 tracked targets (speed and course vectors shown quickly). It can also expand to AIS target tracking when paired with a Furuno AIS system.
Raymarine RD418HD 4kW Digital Radome with 10M Raynet Cable, 18-Inch, White (T70168)
The Raymarine RD418HD 4kW HD digital radome is designed to deliver detailed radar returns with an ultra-compact scanner and a 256-color target display. It is a strong fit for boat owners using Raymarine a-series, c-series, or e-series multifunction displays, but it can be a mismatch if you are trying to pair it with older, non-compatible networking or radar/bridge setups.