CD Slot Mount for CarPlay Screen 360° Rotatable,CarPlay Screen Mount with Triangle Stabilizing Support,Universal CD Mounts for CarPlays Screens/Dashcam/GPS Car Accessories
Quick take
This CD-slot insert mount is designed to hold CarPlay screens and other compatible screens using a stable triangle support and a universal ball-joint style connection for 360° rotation. It is a solid fit when your car has an accessible CD slot and you match screen size (6.86 to 11.30 inches). The main caveat is stability, as some buyers mention mild wiggle, and at least one report describes sagging after a short period.
Pros and cons
Pros
- 360° rotation helps you set a comfortable viewing angle.
- Triangle support is intended to stay snug in the CD slot during normal driving.
- Compact design, aiming not to block buttons and screen access.
- Nylon construction is built for repeated daily use and resistance to scratches.
Cons
- Only works if you have a non-hidden, usable CD slot, and placement can be limited near the gear shifter.
- Some buyers describe a little wiggle or jiggle even after tightening.
- Stability over time may vary, with limited evidence but at least one report of sagging.
What buyers think
Buyer-review evidence is mixed but consistently focused on fit and day-to-day stability. Several buyers say the mount installs easily, fits snugly in their CD slot, and still allows access to buttons behind the screen. A few specifically like having the setup higher than some dash alternatives and note the mount does not block important controls.
On the stability side, some mention that the mount is secure but may still wiggle a bit while driving or when adjusted. There is also limited evidence of a more serious problem, where the screen reportedly began to sag after a short time and the mount later would not tighten properly. Overall, the most reliable takeaway is that proper tightening matters, and your experience may depend on your vehicle’s CD-slot shape and how close the mount sits to surrounding surfaces.
How this CD-slot mount works (and what to check first)
This is a CD-slot insert mount. You place the base into your car’s CD slot, then align the screen mount points and secure it using the provided knobs. It is designed to mount both upward and downward, which can help you dial in a usable screen position without blocking nearby controls.
Compatibility checklist
- Your car must have a CD slot that is not hidden. It also may not fit well in certain layouts where the CD slot is close to the gear shifter.
- Screen size range: compatible with screens from 6.86 to 11.30 inches (check your device’s screen size before buying).
- Use case: it is intended for CarPlay screens, and it can also be used with other dash-style devices like dashcams and GPS units that fit the mounting dimensions.
Pros and tradeoffs for everyday use
Rotation is a real benefit for viewing comfort
The 360° rotatable connection is meant to make it easier to adjust your screen angle each time you drive. For people who switch between seating positions or prefer a particular screen tilt to reduce glare, that adjustability can be a practical upgrade over fixed mounts.
Triangle support helps, but the fit still matters
The mount uses a triangle-style base intended to sit firmly in the CD slot. Buyers who report snug fit often describe it as sturdy during normal driving. However, other buyers report mild wiggle or jiggle. That suggests the CD-slot geometry in your vehicle, plus how tightly you secure the knobs, can affect real-world stability.
Compact footprint can be easier than suction or dash placements
Because it inserts into the CD slot, it can keep the screen away from some common dash clutter points. Some buyers also liked the clearance for reaching buttons behind the screen area, which can matter for cars with controls close to the stereo stack.
Who should buy it
- Drivers with an accessible CD slot who want a cleaner, insert-based mounting approach for a CarPlay screen.
- People who value angle adjustment, thanks to the 360° rotation feature.
- Shoppers whose screen falls in the stated 6.86 to 11.30 inch compatibility range.
Who should avoid it
- Anyone whose CD slot is hidden, inaccessible, or positioned in a way that makes insertion difficult (especially if it is close to the gear shifter).
- Buyers who need a rock-solid, vibration-proof mount and cannot tolerate any wiggle under driving conditions.
- People using devices outside the screen-size compatibility range.
Verdict
The CD Slot Mount for CarPlay Screen is a good budget-friendly idea if your vehicle has the right CD-slot setup and your screen size matches the compatibility range. The triangle base and 360° rotation address two common mounting priorities, a stable insert and comfortable viewing angles. Just be mindful of stability, because buyer reports indicate that slight wiggle is possible and long-term sagging is a rare but real concern.
FAQs
What size CarPlay screen is compatible?
It is designed for screens in the 6.86 to 11.30 inch range. Measure your device’s screen size before purchasing.
Does this mount work with a hidden CD slot?
No, it is intended for cars with a usable, non-hidden CD slot. It may not work well with hidden CD slots.
Can I rotate the screen after installing it?
Yes. The mount uses a universal ball-joint style connection that allows 360° rotation so you can set your preferred angle.
Is it stable on bumpy roads?
Many buyers describe a snug fit and no major bounce when properly tightened, but some report mild wiggle or jiggle. Stability can depend on your vehicle’s CD-slot shape and how tightly you secure the knobs.
Is this only for CarPlay screens?
It is intended for CarPlay screens and also supports other compatible dash-style devices such as dashcams and GPS units, as long as they fit the screen mounting requirements.
Specifications
| Product Title | CD Slot Mount for CarPlay Screen 360° Rotatable,CarPlay Screen Mount with Triangle Stabilizing Support,Universal CD Mounts for CarPlays Screens/Dashcam/GPS Car Accessories |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Vehicle Audio & Video Installation |
| Brand | VKQTS |
| Manufacturer | VKQTS |
| Model Number | CD Slot Mount |
| Color | Black |
| Item Weight | 1 Ounces |
| Compatible Devices | smartphones, tablet |
| Compatible Phone Models | Universal |
| Mounting Type | Vehicle Mount |
| Additional Features | Rotatable |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 4.66 x 3.21 x 3.1 inches |
| Unit Count | 1.0 Count |
| Mfr Part Number | VKQTS-CD Cha Cao Zhi Jia-1703 |
| Warranty Description | Warranty Within 3 Mouths |
| Built-In Media | 1*CD Slot Mount |
| Enclosure Material | Nylon |
Recommended next
![VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]](/product-images/019ed146-d827-75bd-84e0-aec48a74b355-0-cb03f238f7ed.webp)
VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]
The VICSEED 2026 Ultimate Sturdy Car Phone Holder is a universal, long-arm car mount designed for secure one-handed mounting and 360° positioning. It uses a strong retractable suction cup for dashboard or windshield use, plus an air vent clip option, and it’s intended to handle phones in thick cases (up to about 0.6" thickness). The main caveat is that air-vent fit can vary by vehicle vent design, so dashboard/windshield suction may be the safer bet for some drivers.
Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994-2012 GM Vehicles
The Metra Electronics 95-2001 double DIN dash kit is an installation-focused trim and mounting solution for select 1994 to 2012 GM vehicles. Buyers report a generally straightforward fit and use of the included brackets, trim plate, and spacers, but fit can vary by exact vehicle and you may need to pay attention to small alignment details.
Scosche ICCR3BN Single DIN Radio Install Dash Kit Compatible with Select 2002-07 Chrysler, Dodge & Jeep Vehicles
The Scosche ICCR3BN is a vehicle-specific single DIN dash kit and harness designed to help you install an aftermarket radio in select 2002 to 2007 Chrysler, Dodge, and Jeep models. It’s built for a “factory look” and aims to reduce wiring and fitment guesswork, with the main caveat being that it is true single DIN, and some radios may require minor kit trimming to match the opening size.
NuIth Double DIN Radio Installation Dash Kit W/Radio Wire Harness
The NuIth double-DIN dash kit and wiring harness is designed to help you mount an aftermarket radio cleanly in select 2007-2016 Dodge, Jeep, and Chrysler vehicles, filling common trim gaps while using existing factory connections. It generally gets praised for fit and straightforward installation, but some buyers report it may require additional modification on certain model years, and connector quality can be a weak point.