2PCS Car Double DIN Installation Kit with Screws (Metal Mounting Brackets)
Quick take
This double DIN installation kit includes two metal mounting brackets and eight screws to help secure a stereo or similar audio equipment in a stable position. It’s designed with multiple mounting hole options for adjusting the fit, and reviewers generally describe it as sturdy and easier to work with than some plastic alternatives. The main caveat is that fit can vary by vehicle, and some installs may require minor modification to get alignment right.
Pros and cons
Pros
- Iron bracket material for a firm, sturdy mount.
- Multiple long and short holes for adjusting mounting position.
- Includes screws (8) to complete the bracket fastening.
- Simple installation workflow, bracket positioning then tightening.
Cons
- Fit is not guaranteed for every vehicle, some setups may need minor modification.
- One review flagged incorrect sizing, so confirm bracket dimensions and your mounting-hole pattern before purchase.
What buyers think
Buyer-review evidence is limited but points to a consistent theme: the kit is generally workable for double DIN radio installs and feels sturdier than lightweight plastic options. Several reviews mention good or easy use, along with the ability to adjust for a precise fit. At the same time, review coverage includes warnings about fit variability, including at least one instance of perceived wrong size. Overall, the most reliable takeaway is that bracket alignment may take small tweaks depending on your dash and radio chassis, even though the kit is designed with multiple hole locations.
What this kit is for
This is a two-bracket mounting solution intended to help hold a double DIN car stereo (and some compatible audio components) in place. By using a metal bracket system, the goal is to reduce movement in the dash area that can cause shifting or loosening over time.
Key features that affect usability
Multiple holes for tuning alignment
The brackets are built with multiple long and short holes so you can fine-tune the mounting position. If your vehicle’s dash opening or factory hole placement does not line up perfectly with your head unit’s chassis, this adjustability can make the difference between a clean install and a frustrating one.
Metal construction aimed at stability
With iron as the main material, the brackets are positioned as a higher-strength alternative to flimsy mounts. In practice, the bracket material choice matters because double DIN radios are heavier than many single-DIN units, and a stable mount helps keep the stereo secure.
Included screws simplify the job
The kit comes with eight screws, intended for fastening the brackets to the audio device once the holes are aligned. That means you are not likely to immediately need extra mounting hardware to start the install.
Size and compatibility you should verify first
Before buying, check the supplied bracket and screw dimensions. The kit lists:
- Bracket size: 2.95 x 2.72 x 0.96 inches
- Screw size: 0.39 x 0.39 x 0.34 inches
- Screw thread diameter: M5
Because the reviews include both “good fit” and “needed modification” comments, it’s smart to confirm that your vehicle’s mounting points and your stereo’s mounting ear pattern match what these brackets can accommodate using the available hole positions.
Pros and cons versus the typical installation-kit choices
Choose this kit if you want
- A straightforward bracket-and-screws setup for a double DIN radio install.
- Metal mounting hardware for a more rigid feel.
- Adjustable hole locations to improve your odds of alignment.
Consider another approach if you
- Need vehicle-specific fitment with minimal or no tweaking. In some installs, buyers report needing minor modifications.
- Are working with unusual dash hole spacing or a stereo chassis that does not line up well without a more customized bracket solution.
Price and availability
The kit is priced in the budget range and is marked in stock for US buyers. If you want to see the current cost and purchase options, use the link below to check the latest listing details.
Verdict
The 2PCS double DIN installation kit is a practical, low-cost way to stabilize a double DIN head unit using iron brackets and included M5 screws. If your dash opening and stereo mounting pattern are reasonably compatible, reviewers suggest the brackets can be adjusted to get a solid fit. If your vehicle requires exact match hardware, plan on verifying dimensions and be prepared for possible minor modification during alignment.
FAQ
Is this kit compatible with all double DIN radios?It is designed for double DIN mounting, but compatibility depends on how the radio chassis and your vehicle’s mounting points line up. The kit’s multiple holes and M5 screw thread size can help with adjustment, but fit is not guaranteed for every dash setup.
What screws are included, and what thread size do they use?The package includes eight screws, and the listed thread diameter is M5.
Do the brackets require tools or a complex installation?The install is intended to be straightforward: position the brackets, align the holes with the radio, then tighten using the included screws.
Will I need to modify anything to make it fit?Some installs are described as needing minor adjustment or modification, likely due to vehicle-specific dash spacing and chassis alignment differences. If your car is known for tight or unusual mounting, verify dimensions and hole patterns first.
What are the bracket dimensions?The bracket size is listed as 2.95 x 2.72 x 0.96 inches.
Specifications
| Product Title | 2PCS Car Double DIN Installation Kit with Screws,Car Double DIN Kit Mounting Brackets for Audio Fixing,Professional Automotive Tools Radio Mounting Kits Metal Bracket for Cars Audio |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Vehicle Audio & Video Installation |
| Brand | YGDMD |
| Manufacturer | YGDMD |
| Item Weight | 1.2 ounces |
| Product Dimensions | 2.95 x 2.72 x 0.96 inches |
| Item model number | Double DIN Installation Kit |
| Manufacturer Part Number | YGDMD-Yin Xiang Jia |
Recommended next
![VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]](/product-images/019ed146-d827-75bd-84e0-aec48a74b355-0-cb03f238f7ed.webp)
VICSEED 2026 Ultimate Sturdy Car Phone Holder [Upgraded 95+LBS Strongest Suction]
The VICSEED 2026 Ultimate Sturdy Car Phone Holder is a universal, long-arm car mount designed for secure one-handed mounting and 360° positioning. It uses a strong retractable suction cup for dashboard or windshield use, plus an air vent clip option, and it’s intended to handle phones in thick cases (up to about 0.6" thickness). The main caveat is that air-vent fit can vary by vehicle vent design, so dashboard/windshield suction may be the safer bet for some drivers.
Metra Electronics 95-2001 Double DIN Installation Dash Kit for Select 1994-2012 GM Vehicles
The Metra Electronics 95-2001 double DIN dash kit is an installation-focused trim and mounting solution for select 1994 to 2012 GM vehicles. Buyers report a generally straightforward fit and use of the included brackets, trim plate, and spacers, but fit can vary by exact vehicle and you may need to pay attention to small alignment details.
Scosche ACM5B Universal Marine Radio Cover
The Scosche ACM5B is a single-DIN marine radio protector designed to shield a head unit from rain, splashes, and spray while keeping quick access via a spring-loaded flip-up door. It fits broadly, but plan on doing your own dash cutout and trimming so the door opens and closes cleanly.
Scosche TA2053B Double DIN Radio Install Dash Kit Compatible with Select 2005-2008 Toyota Tacoma
The Scosche TA2053B is a vehicle-specific double DIN dash kit for select 2005 to 2008 Toyota Tacoma models. Buyers typically like the tight, gap-free look, good color match, and the ability to reuse stock Tacoma mounting hardware for a secure, properly aligned install, with the main caveats being minor trim fitment variability and a couple of parts that may feel less sturdy.