Bottom Cover Rubber Feet Strips Replacement for HP Envy X360 15-DR 15-DS 15-DA 15-DB 250 G7 255 G7 256 G7 (Silver)
Quick take
This adhesive rubber feet strip replacement is designed to restore the bottom-corner support and anti-slip pads for select HP Envy X360 15-series models and some 250/255/256 G7 configurations. Most buyers like the fit and staying power, but a recurring practical note is that you may need to trim the strip length to match your exact area.
Pros and cons
Pros
- Made for specific HP Envy X360 15-series model compatibility (including listed 250/255/256 G7 variants).
- Buyers report strong adhesive and good staying power once applied.
- Easy installation, peel-and-stick style, and helps raise the laptop slightly.
- Ships with 2 pieces in the set.
Cons
- Length may run slightly longer than the original on some units, so trimming can be necessary.
- To get the best hold, you will need to clean the surface thoroughly before sticking.
- Buyer-review evidence is limited, so results can vary by model and prep.
What buyers think
Buyer-review evidence centers on fit, adhesive performance, and overall usefulness after replacement. Multiple reviews describe a straightforward peel-and-stick install and feet strips that stay in place. Several buyers also mention the strips can be slightly taller than OEM, which they view as a positive for circulation, and at least a couple report trimming is needed because the strip length can be a bit longer than the original. Overall, the common theme is that the product works well for the intended HP models when the installation area is cleaned and the strip is sized correctly.
What this replacement part is for
These are bottom cover rubber feet strips intended to replace lost, broken, or worn rubber foot pads on compatible HP Envy X360 convertible laptops and select 250/255/256 G7 configurations. The adhesive backing is meant to bond the strip to the laptop’s base so the machine sits more securely and does not slide as easily on smooth surfaces.
Key specs to check before you buy
- Material and color: rubber, silver finish.
- Set size: 2 pieces.
- Dimensions: each strip is listed as 31.6 cm long x 0.6 cm wide x 0.2 cm thick.
- Compatibility notes: designed for models listed for this replacement, including specific Envy X360 15-DR/15-DS/15-DA/15-DB variants and related 250 G7, 255 G7, and 256 G7 sets (model and MPN identifiers like TPN-C135 and TPN-C136 are part of the intended fit).
Installation, adhesive hold, and “do I need to trim?”
The adhesive design is straightforward: peel the release liner, align the strip, and press it onto the bottom base. Buyers who had the best outcome emphasize surface prep, cleaning away dust and dirt first, then giving the adhesive time to set. A practical consideration is length. Some reviewers report their strips are slightly longer than the original and needed minor trimming with a sharp blade to match their laptop’s exact fit area. If you’re careful with alignment, trimming is typically a manageable fix for a too-long strip.
Pros for your day-to-day use
More stable placement
The rubber foot strips are designed to improve grip on smooth surfaces, which can help prevent shifting during typing, studying, or commuting.
Raised stance for better airflow
Because replacement feet can be slightly thicker than OEM on some units, they may raise the laptop a bit. Buyers often value this because it can improve circulation around the bottom.
Restores the look and function of a worn bottom
If your existing feet have fallen off or degraded, replacing them helps the laptop sit correctly again and reduces the “bare plastic” feel at the corners.
Who should buy
- You have a compatible HP Envy X360 15-series model listed for this replacement (or a covered 250/255/256 G7 configuration).
- You need a peel-and-stick rubber feet strip solution to replace missing or worn bottom feet.
- You’re comfortable cleaning the bonding area and, if needed, doing minor trimming to match the original length.
Who should avoid (or consider alternatives)
- You want a plug-and-play replacement with no adjustment, and trimming would be a dealbreaker.
- Your laptop model is not in the supported list, because compatibility is the deciding factor for a proper fit.
- You prefer screw-in parts or OEM-style hardware, since this is an adhesive strip replacement.
Price and availability
This is a low-cost laptop replacement part (sold as a 2-piece set) and typically fits best when you need a quick repair rather than a full bottom cover replacement. For the most current price and shipping options, check the product listing.
Bottom line verdict
If you have a compatible HP Envy X360 15-series or listed 250/255/256 G7 configuration, these rubber feet strips are a practical, adhesive-based fix that buyers generally find stays put and improves the laptop’s stance. Just expect that you may need to trim the strip length for a precise fit, and plan to clean the surface thoroughly before applying.
FAQ
How do I install these rubber feet strips?
Clean the bottom base area first, peel off the release liner, align the strip, then press firmly into place. Let the adhesive set for the best hold.
Do these strips work without trimming?
Some buyers report a close fit, while others say the strip length can be slightly longer than the original and needs minor trimming. If you want a guaranteed no-trim fit, compatibility and sizing are worth double-checking.
Are these compatible with all HP Envy X360 models?
No. They are intended for specific HP Envy X360 15-series model lines and related 250/255/256 G7 variants. Confirm your exact model before ordering.
What is included in the package?
You receive 2 rubber feet strips.
Will the adhesive hold on smooth surfaces?
The intended design is a strong adhesive bond to the laptop base, and buyers generally describe the strips as staying in place after application when the surface is cleaned and allowed to set.
Specifications
| Product Title | Bottom Cover Rubber Feet Strips Replacement for HP Envy X360 15-DR 15-DS 15-DA 15-DB 15M-DR 15G-DR 15G-DX 15T-DA 15Q-DS 15T-DB 250 G7 255 G7 256 G7 TPN-C136 15-DS1063CL 15-DS1083CL(Silver) |
|---|---|
| Category | Electronics > Computers & Accessories > Computer Components > Laptop Replacement Parts |
| Brand | Huasheng Suda |
| Manufacturer | Huasheng Suda |
| Item Weight | 0.04 Kilograms |
| Color | silver |
| Material | Rubber |
| Size Name | 31.6 cm x 0.6 cm x 0.2 cm |
| Item Diameter | 0.6 Centimeters |
| Compatible Groove Diameter | 0.6 Centimeters |
| Number of Pieces | 2 |
| Outside Diameter | 0.6 Centimeters |
| Material Type | Rubber |
| Exterior Finish | Silver Rubber |
| Finish Types | Uncoated |
| Screw Head Style | Flat |
| Screw Point Style | Flat Point |
| Head Type | Flat |
| Set Name | 2PCS |
| Number Of Items | 2 |
| Part Number | NZ06136_W-LY1 |
| Model | NZ06136_W-LY1 |
| Unit Count | 2.0 Count |
| Head Style | Flat |
| Point Style | Flat Point |
Recommended next
Replacement LCD Back Cover Top Case Lid Front Bezel Frame with Hinges for Dell Inspiron 15 3510 3511 3515 Series (Black)
This replacement LCD back cover kit includes the top lid, front bezel frame, and two pre-installed hinges for compatible Dell Inspiron 15 (3510/3511/3515 series). It’s a straightforward way to restore the look and hinge function after housing or hinge damage, with the main caveat being that you will reuse existing cables and confirm model compatibility before installing.
14" Laptop Screen Extender, 1080P FHD Dual Portable Monitor for Laptop with Speaker, USB-C/HDMI Plug & Play, Extended Screen for Mac/Windows/Chrome, Fit 13-17.3" Laptops
The FEZOBR 14-inch 1080p portable screen extender is designed to add a second display on the go with plug-and-play USB-C (or HDMI plus USB-A) and extend or mirror modes. It’s a strong fit for remote work and travel, with a key caveat: compatibility can vary by laptop and connection setup.
ProElife 7 Pcs Anti Dust Dirt Plug Cups Set
A budget-friendly silicone set of port plugs designed to help keep compatible MacBook Pro and MacBook Neo ports cleaner when they are not in use. Buyers report a snug fit for many ports and easy install, but a recurring caveat is that some plugs can feel loose or come out more easily depending on the port and model fit.
LCD Back Cover Top Case Lid with Front Bezel Frame with Hinges Shaft Cover Replacement for DELL Inspiron 15 3510 3511 3515 3520 3525
This replacement LCD back cover top case lid includes the front bezel frame, hinge and shaft cover components, and two adhesive strips for compatible Dell Inspiron 15 models (3510/3511/3515/3520/3525). Buyers report a close, OEM-like fit and that it can restore a “factory new” look, with the main caveat being that screws are not included.