BO&DQQ Compatible for Go Pro Hero 13 12 11 10 9 Black Waterproof Housing Case 60M/196FT Protective Underwater Diving Case Shell with Cameras Handle Mount Accessories Kit
Quick take
This BO&DQQ waterproof housing kit is designed for specific GoPro Hero 9 through 13 Black models and adds a tempered-glass front for protection and underwater shooting. It also includes a floating, textured grip plus an anti-fog insert system to help prevent fogging when the camera is inside the case. The main buying caveat is that fit and sealing depend on correct setup, including installing anti-fog inserts before use.
Pros and cons
Pros
- Made to protect the camera with a hard PMMA plastic housing and a tempered-glass front lens cover.
- Includes a floating, non-slip grip and a wrist/anti-lost rope for easier handling in the water.
- Buyer reports commonly mention good fit, no fogging, and no leaking when properly used.
Cons
- Fog prevention depends on installing and using the anti-fog inserts correctly (2 to 4 inserts are recommended).
- As with many aftermarket housings, sealing performance can be sensitive to hardware fit and handling, so it is not the same as using the manufacturer’s own system.
What buyers think
Buyer-review evidence is mixed but informative. Several shoppers report a strong all-around experience, specifically a snug fit for their GoPro, and they mention either no fogging or no seepage when the case is set up properly. Others describe the housing as easy to put on and take off, and they highlight protection for underwater outings like snorkeling and swimming.
There is limited but important negative feedback, including a report of a physical failure during a dive that led to flooding. Because that issue is not supported by many additional similar reports in the available review set, buyer-review evidence is best treated as a reminder to follow setup steps carefully and consider staged testing before relying on it for deeper or more demanding dives.
What this housing kit is for
This is a waterproof GoPro housing aimed at swimmers, snorkelers, and divers who want their Hero 9 to 13 Black camera to be protected from saltwater, spray, dust, and impacts, while still being able to shoot through a clear front. The included floating grip is a practical add-on for keeping the camera and accessories easier to manage on the surface, and the anti-lost rope helps reduce the odds of losing the rig in motion.
Key features that matter for underwater use
Water resistance design (and setup matters)
The housing uses upgraded waterproof seals and fasteners, and it is marketed as waterproof up to 60M (196FT). In practice, water resistance depends on correct closure and proper installation of the camera. The housing also recommends using anti-fog inserts, which is a common pressure-and-temperature issue inside underwater housings.
Tempered-glass front protection
The front lens area uses tempered glass, which is meant to protect the camera’s lens from scratches while still letting you capture clear images underwater. This front cover is especially relevant if you expect contact with sand, rocks, or rougher environments.
Anti-fog inserts for clearer footage
Fogging is one of the most common failure modes for underwater housings. This kit specifically calls out installing 2 to 4 anti-fog inserts inside the case before use. The inserts can be air-dried and reused, which helps if you do multiple trips.
Grip and accessory kit for hands-on handling
The included EVA non-slip floating grip is designed to keep the camera accessible on the water surface. There is also an anti-lost rope to secure it around your wrist during swimming.
Compatibility and buyer-fit
This housing is intended for GoPro Hero 9 Black, Hero 10 Black, Hero 11 Black, Hero 12 Black, and Hero 13 Black models. It is not presented as universal for other GoPro sizes or other brands. If your camera is a different model (including variants that have different dimensions or button layouts), the fit and sealing can be affected.
Pros and cons recap
- Best for: budget-conscious underwater shooters who want hard-shell protection, a tempered-glass front, and a floating grip accessory for water handling.
- Who should buy: swimmers, snorkelers, and divers using a compatible GoPro Hero 9 to 13 Black, and who are willing to spend a few minutes on correct setup (especially anti-fog inserts).
- Who should avoid: shoppers looking for a hands-off experience, or anyone with a history of using housings without carefully checking seals, fit, and insert placement.
Is the BO&DQQ Compatible for Go Pro Hero 13 12 11 10 9 Black waterproof housing worth it?
It looks like a solid value option if your top priorities are mechanical protection, basic underwater readiness, and easier handling thanks to the floating grip. The strongest buyer themes point to good fit and useful anti-fog performance when the recommended setup is followed. The main reason to pause is that waterproofing outcomes can be sensitive to correct assembly and sealing, and there is at least one serious flooding-related report that reinforces the importance of careful use and testing.
If you plan to shoot in deeper water or higher-risk conditions, consider doing a conservative, controlled test first, and be extra strict about inserting the anti-fog materials and fully closing the case before you rely on it.
Price and availability
Check the latest price and shipping details before you buy, since pricing can change over time. Buy on Amazon
FAQ
Does this housing include the anti-fog inserts?
It uses anti-fog inserts that must be installed inside the housing before use, with a recommended 2 to 4 inserts. The inserts are described as air-dryable and reusable.
Which GoPro models does it fit?
It is listed as compatible with GoPro Hero 9 Black, Hero 10 Black, Hero 11 Black, Hero 12 Black, and Hero 13 Black.
How deep is it rated for?
It is marketed as waterproof up to 60M (196FT).
Will I be able to take usable photos underwater through the front cover?
The front uses tempered glass for protection while allowing the camera to shoot through the case. To reduce blur from fogging, anti-fog inserts should be installed before use.
Is the floating grip helpful?
Yes, the kit includes a textured floating grip intended to help keep the rig on the water surface, plus a wrist/anti-lost rope to help prevent losing the camera setup while swimming.
Specifications
| Product Title | BO&DQQ Compatible for Go Pro Hero 13 12 11 10 9 Black Waterproof Housing Case 60M/196FT Protective Underwater Diving Case Shell with Cameras Handle Mount Accessories Kit |
|---|---|
| Category | Electronics > Camera & Photo > Underwater Photography > Housings |
| Brand | BO&DQQ |
| Manufacturer | BO&DQQ |
| Model Name | for Hero 9/10/11/12/13 Black(clear shell) |
| Model Number | for GoPro Hero 9/10/11/12/13 Black |
| Video Capture Resolution | 5K |
| Color | Clear |
| Material | Polycarbonate (PC), Stainless Steel, Tempered Glass |
| Item Weight | 140 Grams |
| Water Resistance Level | Waterproof |
| Enclosure Material | Polycarbonate (PC), Stainless Steel, Tempered Glass |
| Video Capture Format | MP4 |
| Compatible Devices | Go Pro Hero 10 Black, Go Pro Hero 11 Black, Go Pro Hero 12 Black, Go Pro Hero 13 Black, Go Pro Hero 9 Black |
| Audio Recording | No |
| File Format | MP4 |
| Media Type | EnhancedContent |
| Viewfinder Type | LCD screen |
| Item Dimensions D x W x H | 1.18"D x 3.15"W x 3.15"H |
| Mounting Type | Base Mount |
| Compatible Camcorder Models | GoPro HERO10 Black, GoPro HERO11 Black, GoPro HERO12 Black, GoPro HERO13 Black, GoPro HERO9 Black |
| Camera Model Compatibility | GoPro HERO10 Black, GoPro HERO11 Black, GoPro HERO12 Black, GoPro HERO9 Black |
| Unit Count | 1.0 Count |
| UPC | 719081948339 |
| Manufacturer Part Number | Go-Pro-Hero case001 |
| Built-In Media | Underwater Waterproof Case+Camera Handle Mount Accessories Kit |
| Warranty Description | 60-Day money back guarantee |
Available variants
Model
- for GoPro Hero 9/10/11/12/13 Black
- for Hero 3/3+/4 Black Silver
- for 9/10/11/12/13 Black (silver shell)
- for Hero 8 Black
- for Hero 4K Black
- for Hero 11mini
- for Gopro Hero 5/6/7 Black
- for 9/10/11/12/13 Black(black shell)
Recommended next
FitStill 263FT/80M Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black
The FitStill 263FT/80M underwater housing is built for GoPro HERO9 Black through HERO13 Black, using an aluminum alloy shell, stainless-steel hardware, and a large flat glass lens. It’s designed for serious water sports (up to 80m/263ft) with reported leak resistance, clear footage, and easy button access, with a couple of practical limitations to consider for audio and how the housing affects controls.
FitStill Waterproof Housing for Insta 360 X5, 40M Diving Depth
The FiTSTILL underwater housing is purpose-built for the Insta 360 X5, adding a waterproof shell, a thick silicone sealing ring, and an optical-glass lens element for underwater shooting. It’s a solid pick if you mainly want basic protection and button access, but buyer feedback is mixed for demanding dive footage (some users report unusable results).
FitStill Underwater Waterproof Diving Housing for Go Pro Hero 13/12/11/10/9 Black, 60M/196FT
FitStill’s underwater housing is built specifically for GoPro Hero 9 to 13 Black models, aiming to keep your camera protected while you shoot in the water. It’s rated for up to 60m/196ft and uses a large flat glass lens with strong light transmission for clearer underwater footage, but audio recording is not supported through the housing and you may need to plan your depth expectations around real-world fit and sealing.
FitStill Waterproof Diving Case Only for Go Pro MAX2,131FT/40M Underwater
A purpose-built waterproof housing for the GoPro MAX 2, designed for deeper dives up to 40 m (131 ft) with a sealed shell and bracket-mount option. It prioritizes protection and depth resistance, but the covered lens area and non-touch screen design can reduce ease of operation underwater and soften image clarity versus shooting without a housing.