BGHEOUYV 4 Pack TV Cord Hider for Wall Mounted TV, 2-3/8"(60mm Hole) Wire Hider in Wall Cable Management Kit
Quick take
This 4-pack wall cord hider kit helps you conceal TV and accessory cabling by routing it through a 2-3/8-inch (60mm) hole in the wall. It is best for setups where you want a tidy, outlet-free look around a wall-mounted TV or soundbar, and you prefer an installation kit that includes a hole-saw drill attachment. The main limitation is the opening size, so it may not accommodate unusually thick or very large cable bundles.
Pros and cons
Pros
- Includes four pass-throughs plus a hole-saw drill attachment for faster wall prep.
- Designed around a 2-3/8-inch (60mm) hole size, targeting common TV cable runs.
- Made with metal and plastic components, built for long-term cable hiding in indoor use.
- Buyers often describe installation as straightforward and the result as visually cleaner.
Cons
- There is no included retention feature, so some installs may require extra anchoring methods.
- Its diameter is a constraint if you need to pass many cables or thicker-than-normal connections.
What buyers think
Buyer-review evidence is generally positive for this cord hider kit, with recurring themes around ease of use, a cleaner visual outcome, and the usefulness of the included hole bit. Several buyers report that it works well for hiding TV-related cabling and that it helps keep cables neatly routed so the connection area looks less cluttered. Installation feedback is mostly favorable, but limited evidence also points to occasional fit-and-hold issues, where the connector can slip out unless the installer adds an extra securing step (for example, a sealant) for their specific wall situation.
How this TV cord hider works
This kit is meant for wall-mounted setups where cables typically hang down from the TV. You drill a 2-3/8-inch (60mm) hole and use the pass-through connectors to route cables through the wall. The intended benefit is a more finished look around your TV area, since the cable run is concealed rather than visible.
Key specifications that affect compatibility
- Quantity: 4 pass-throughs
- Hole size: 2-3/8-inch (60mm)
- Included tool: 1 hole-saw drill attachment
- Wall cord cover sizing: hole-related dimensions are listed as 2.26 inch outside diameter and 2.79 inch inside diameter
- Installation type: screw-in
- Indoor use: designed for indoor installations
Who this is best for
- Wall-mounted TV owners who want to hide power and typical audio/video connections for a cleaner entertainment area.
- DIY installers who prefer a kit that includes a hole-saw drill attachment so you do not need to find the right bit separately.
- People running a small to moderate number of cables through a single exit point near the TV.
Who should avoid it (or double-check fit)
- Anyone planning to route a very large bundle of cables through the wall opening. The kit is constrained by the 60mm hole size and connector geometry.
- Installations that require a very secure, “no-movement” fit without additional sealing or anchoring. Some users report the pass-through can slip, so your wall material and mounting approach matter.
Pros and cons, from a buyer’s perspective
Installation experience
Most feedback highlights simple, practical installation and a good end result. The included hole-saw drill attachment is commonly viewed as a helpful touch because it removes one common friction point: getting the correct bit for the hole size.
Cable hiding and access
This kit focuses on concealed cabling while leaving access to the TV connection area. That is especially useful for setups where you need to plug and unplug HDMI, auxiliary audio, or power without routing everything visibly along the wall.
Build and durability
It uses a metal and plastic build intended for stability and long service life in indoor use. While durability depends on how it is mounted, the materials are meant to stand up to everyday handling when you route cables through the pass-through.
Common tradeoffs to consider before buying
- Single exit point planning: Because this is a discrete pass-through, plan your cable lengths and where devices will sit so connectors reach comfortably once the cable run is hidden.
- Wall material matters: Some installs may benefit from added securing (such as sealant) depending on how snug the connector fits in your wall and whether you are mounting into drywall, masonry, or another surface type.
- Cable type and bulk: If you rely on thick power adapters, unusually large connectors, or multiple chunky cords, verify that the internal diameter and hole size match your exact cable bundle needs.
Verdict
If you are looking to clean up cabling around a wall-mounted TV, the BGHEOUYV 4-pack wall cord hider kit is a practical choice thanks to the included hole-saw attachment and the 60mm pass-through design. It is a strong fit for typical TV power and AV connections, but it is not ideal for very large cable bundles, and you may need an extra securing step to prevent the connector from slipping depending on your wall setup.
Price and availability
Check the latest price and stock status before ordering, since availability can vary by listing and region. You can view the most current details here: Buy on Amazon.
FAQ
What hole size do I need for this TV cord hider kit?
It is designed for a 2-3/8-inch (60mm) hole.
Does the kit include a drill bit or hole-saw attachment?
Yes, it includes a hole-saw drill attachment along with the 4 pass-throughs.
How many cables can fit through a single pass-through?
The kit is intended for typical TV-related connections, but the exact number depends on your cable thickness and connector size. If you are routing a very large bundle, you should verify it will fit within the connector’s diameter.
Will it work for a soundbar or other home theater devices?
It is suitable for wall cable management where you want to hide small TV or audio accessory cables through a 60mm hole, as long as your connectors fit.
Is it meant for indoor use only?
It is listed for indoor use.
Does the connector stay securely in the hole?
Many installations go smoothly, but some users report the connector may slip in certain setups, so you may need additional securing such as sealant depending on your wall material and fit.
Specifications
| Product Title | 4 Pack TV Cord Hider for Wall Mounted TV, 2-3/8"(60mm Hole) Wire Hider in Wall Cable Management Kit, Includes 4 Pass Throughs and 1 Hole Saw Drill Attachment Easy to Install |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Cable Raceways |
| Brand | BGHEOUYV |
| Manufacturer | BGHEOUYV |
| Color | White |
| Material | Metal, Plastic |
| Product Dimensions | 2.26"L x 2.26"W |
| Indoor Outdoor Usage | Indoor |
| Number of Pieces | 4 |
| Unit Count | 4.0 Count |
| Warranty Description | 1 year |
| Enclosure Material | Metal, Plastic |
| Item Dimensions L x W | 2.26"L x 2.26"W |
| Installation Type | Screw-In |
| Style Name | Modern |
| Style | Modern |
Available variants
Size
- 50mm - 2 Pack
- 60mm - 4 Pack
- 50mm - 4 Pack
- 50mm - 14 Pack
- 60mm - 8 Pack
- 50mm - 8 Pack
Recommended next
ECHOGEAR Wall Cable Hiders for Cable Management
ECHOGEAR’s mini wall cable hiders are push-in grommets designed to conceal up to three low-voltage cables in a neat, low-profile opening. Best for anyone running speaker, Ethernet, or other low-voltage wiring behind mounted TVs, speakers, and small desk cable paths, with the main tradeoff being careful handling if you plan to reposition inserts.
D-Line 157in Cord Cover Kit, Self-Adhesive Wire Hiders, Paintable Cable Raceway to Hide Wires on Wall
The D-Line 157in cord cover kit is a paintable, self-adhesive cable raceway system designed to hide up to 3x 4.5mm (0.18in) outer-diameter cords per channel. It’s geared toward straightforward wall runs like TV-to-outlet setups, with pre-cut style lengths, connector accessories, and an adhesive-first installation that performs best on clean, smooth surfaces.
TuweChen cable management box (wooden-lid, large cord organizer)
A large, dust-cover cable organizer box designed to hide power strips and bundled cords while keeping them routed through side openings. It uses an ABS body with a wooden-style lid and comes with multiple clip holders and reusable cable ties for setup, but it may not fit all “square” power strips without adjustments.
D-Line Cable Management Box, Power Strip Holder, Floor Outlet Hiders, Desk Cord Organizer, Cover TV Wires, Wire Storage, Extension Hider, Office Concealer for Cords, Baby Proof Cables - Large, Black
The D-Line large cable management box is a freestanding ABS plastic enclosure designed to hide a power strip plus extra cord runs for cleaner TV stands, desks, and other media or office setups. Buyers like the tidy look and cord security, with the main caveat being that it only fits power strips sized appropriately to the box dimensions.