2 Pack Battery Holder for Milwa.....12V Tool, Wall Mount for review
Quick take
This two-pack battery holder set is designed to keep 12V tool batteries stored neatly on a wall or workbench, with four independent slots per rack. Buyers like how it reduces battery clutter and makes it easier to grab a stored pack without digging around. The main caveat is fit, it is intended for 12V style batteries such as Milwaukee M12 and similar sizes, and may require confirmation if you use other brands.
Pros and cons
Pros
- Aluminum alloy construction, built to resist deformation and corrosion versus plastic-style holders.
- Wall-mount design with straightforward screw installation, includes mounting screws.
- Two holders in the box, with 4 slots per rack for organizing multiple 12V batteries in less space.
- Painted/powder-coated finish intended to help protect against rust.
Cons
- Best fit depends on your battery shape, the system targets 12V batteries (for example M12, 4.0 and 6.0 sizes).
- The finish is listed as unfinished in some specs, so you may want to consider how that works with your storage location.
What buyers think
Buyer-review evidence is limited but consistent on a few decision factors. The most common theme is organization, people report that mounting the holders near their work area keeps batteries off the floor and reduces time spent searching for a charged pack. Several buyers also highlight sturdier construction compared to plastic alternatives, describing less flex under battery weight. Fit is another recurring theme, reviews mention good compatibility with Milwaukee M12 size batteries including 4.0 and 6.0.
Who this battery holder is for
- DIYers and shop owners who want wall storage for multiple 12V tool batteries, especially when batteries tend to spread across the bench or floor.
- People running more than one cordless tool and want a consistent, repeatable place to store charged packs.
- Buyers who prefer metal over plastic for higher rigidity and better corrosion resistance in a garage or workshop environment.
Who should avoid it
- If your battery brand and case shape do not match 12V/M12-style dimensions, you will want to double-check slot fit before committing.
- If you need a handheld or portable charging setup, this is a storage rack, not a charger.
Key features, explained
Two racks, four slots per holder
Each battery holder has four independent slots, and the set includes two racks. That makes it easier to separate packs by tool or by charge status, while keeping your storage footprint compact.
Wall-mount storage to free up workspace
The design is meant to be mounted on a wall, under-shelf area, or workbench area. The goal is simple, keep batteries within reach and out of clutter so you are less likely to misplace a pack mid-project.
Aluminum alloy body for rigidity and corrosion resistance
Instead of using a plastic frame, the holder is made from aluminum alloy and finished with a protective coating intended to resist rust. Buyers specifically call out sturdiness compared with earlier plastic versions they used.
Simple installation
The package includes two battery holders and eight screws, installation is straightforward: position the holder where you want storage, secure it with screws, and you can start sliding batteries into the slots.
Pros and cons breakdown for real buying decisions
Best fit strengths
- Organizing multiple 12V batteries in one place, the multi-slot design supports a repeatable storage routine.
- Durable feel for garage use, metal construction is a practical upgrade over lighter plastic racks.
- Quick access, when the rack is mounted near your tools, grabbing a battery is less of a scavenger hunt.
Tradeoffs to consider
- Slot compatibility matters, intended for 12V tool batteries (commonly M12 sizes). If your batteries are different, confirm fit before mounting.
- Wall mounting requires a planned location, because you are drilling and positioning hardware, you will want to mount in a spot that works with your workflow.
Price and availability
The set is currently listed at $13.99 (with a higher list price shown), and it is marked as in stock. If you are comparing options, weigh the value of the two-pack bundle and the metal construction against any alternative storage systems that might be cheaper but less rigid.
Verdict
If you have several 12V tool batteries and want a simple, wall-mounted way to keep them organized, this two-pack aluminum battery holder set is a practical choice. It earns strong support for reducing clutter and feeling sturdier than typical plastic alternatives. Just be sure your specific batteries match the intended 12V/M12-style fit, since compatibility is the biggest factor that will determine whether you get a clean, secure slide-in storage experience.
FAQs
How many batteries can this hold?Each rack has 4 independent slots, and the set includes 2 racks, so it can store up to 8 batteries total (based on slot compatibility with your battery size).
Is it only for Milwaukee M12 batteries?It is designed for 12V tool battery storage and is commonly used with Milwaukee M12 sizes (including 4.0 and 6.0). For other brands or battery shapes, you should verify that your batteries fit the slot geometry.
Is it wall-mount only?The holders are designed for wall mounting and can also work in other secure mounting locations like workbench or under-shelf setups where you can screw them in place.
What material is it made from?The racks are made from aluminum alloy, with a protective painted/powder-coated finish intended to help prevent rust.
Does it come with mounting hardware?Yes, the set includes mounting screws for installation.
Specifications
| Product Title | 2 Pack Battery Holder for Milwa.....12V Tool, Wall Mount for Milwa.....12V Batteries Storage with Accessories, Wall Mount Storage Organizer Rack with 4 Slots |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | EZYPAK |
| Manufacturer | EZYPAK |
| Model Number | GN-MK |
| Color | Red |
| Material | Aluminum |
| Item Weight | 0.32 Kilograms |
| Brand Name | EZYPAK |
| Set Name | 2 Pack Battery Holder Set |
| Manufacturer Part Number | GN-MK |
| Manufacturer Warranty Description | no |
| Unit Count | 2.0 Count |
| Material Type | Aluminum |
| Mounting Type | Wall Mount |
| Finish Types | Unfinished |
| Finish Type | Unfinished |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
Crivnhar battery mount holder compatible for RIDGID 18V batteries (5-pack)
Crivnhar’s 5-pack battery wall/garage holders are designed for select RIDGID 18V models, helping you store batteries off benches and floors while keeping access quick. The holders snap in securely and are built from impact-resistant ABS, but installation alignment can take a little patience.
ENGPOW Battery Organizer, Fireproof Battery Organizer Storage Case with Tester (BT168)
The ENGPOW BT168 is a soft, zipper-closed battery storage case designed to hold 220+ mixed battery types while keeping them separated in foam cutouts. It adds a battery tester for quick “what to recycle” checks and aims to reduce risk with fire-retardant, water-resistant materials. It is best for households that want a single place for AA/AAA/C/D/9V and common button batteries, but it has a fixed slot layout, so niche battery shapes may not fit perfectly.
SDTC Tech 2-Set 4X 1.5V AA Battery Holder and I Type Snap Connector Kit 6 Volt Thicken Plastic Battery Case Box
This kit bundles two 4x AA battery holders (6V output) with I-type snap wire leads for quick connections. It’s a practical choice for Arduino and electronics builds, LED devices, and straightforward repairs, with buyers praising the sturdy plastic construction and easy setup.