Crivnhar battery mount holder compatible for RIDGID 18V batteries (5-pack)
Quick take
This 5-pack of wall-mount battery holders is built to store compatible RIDGID 18V batteries neatly and securely, with a snap-in design that aims to reduce slipping during everyday use. It is a good fit if you want faster battery access and cleaner organization in a garage or work truck. The main caveat is that mounting can be a bit finicky to align screws perfectly.
Pros and cons
Pros
- Designed for specific RIDGID 18V battery models, with a snap-in groove for a secure fit.
- Impact-resistant ABS plastic, lightweight, and intended for everyday environments.
- Includes screws for wall mounting, supporting quick installs with basic tools.
- Helps keep batteries off benches and floors for easier access and fewer mix-ups.
Cons
- Installation alignment can take patience if you want everything perfectly straight.
- Buyer-fit depends on battery model compatibility, and batteries are not included.
What buyers think
Buyer feedback is broadly positive around how well the holders organize batteries and how firmly they hold compatible packs in place. Many comments focus on clean fit and finish, easy daily use, and the convenience of keeping batteries accessible in multiple locations (for example, garage plus workshop). A recurring practical theme is that setup is straightforward, but aligning the mount points can be “finicky,” especially when aiming for a polished, perfectly lined installation.
What this battery holder is for
If you have multiple 18V batteries and they tend to live in buckets, bags, or on work surfaces, these wall/garage mounts are meant to solve the “where is the right battery?” problem. The holders let you mount batteries so they are easy to grab, easy to visually check, and less likely to get knocked around on the floor or workbench.
Compatibility and fit details that matter
These holders are intended for select RIDGID 18V battery models, including L1815R, B1820R, L1830R, B1830R, B1820, and certain AC variant numbers listed for the lineup. The design uses a snap-in groove meant to lock batteries in place so they do not slip even if the holder is mounted at different orientations. If your battery model is not in the supported list, it is a good idea to verify compatibility before buying.
Build quality, capacity, and day-to-day use
The holders are made from impact-resistant ABS plastic (not 3D-printed), aiming to handle daily wear plus common workshop conditions like dust and temperature swings. Each holder is lightweight, and the set stores up to five batteries total (one per holder). On the user-experience side, buyers describe a satisfying, secure feel when batteries are dropped into place and an easy removal action when you release them.
Installation: fast, but alignment can be the hard part
Setup is designed to be quick: mark, drill, and secure. The kit includes screws (20 total, for four per holder). This makes it practical for mounting on garage walls, workbench areas, or even in work-truck style setups.
Space saving and organization benefits
Mounting batteries vertically helps free up bench space and reduces clutter. It can also help protect packs from contact with dust and scratches that happen when batteries are left loose on surfaces or floors. For people who manage a battery inventory across multiple work locations, having the same storage layout can make it easier to keep track of which batteries are charged and where they are stored.
Pros and cons recap
- Best for: Owners of compatible RIDGID 18V batteries who want wall-mounted storage for quicker access and cleaner organization.
- Also a good fit for: Workshops and job sites where batteries need to stay accessible but protected from accidental knocks.
- Avoid if: You need a universal holder for many battery brands or your batteries do not match the listed RIDGID models.
Is it worth it?
If your main pain point is messy battery storage and slow “hunt time” when you need a specific pack, these mounts are a practical solution. The value is strongest when you already own compatible RIDGID 18V batteries and want a tidy, repeatable setup across one or more locations. Just budget a little extra patience for alignment during installation, especially if you are mounting multiple holders in a straight line.
FAQ
Which RIDGID 18V batteries are these holders compatible with?
They are designed for select RIDGID 18V models listed for the lineup, including L1815R, B1820R, L1830R, B1830R, and B1820, along with specified AC variants. If your battery model number is not on the supported list, confirm compatibility before purchasing.
Do these holders include batteries?
No. The set is for the holders only, and batteries are not included.
Are the holders sturdy enough for a garage or work truck?
They are made from impact-resistant ABS plastic and are intended to keep batteries secure using a snap-in groove. That combination is designed for everyday environments where batteries may be bumped or moved frequently.
How difficult is installation?
The kit is designed for quick mounting using included screws. The process is straightforward (mark, drill, secure), but aligning multiple holders so everything lines up neatly can require careful measurement.
How many batteries can you store?
This is a 5-pack, with capacity for up to five batteries total (one per holder).
Can you mount them in different orientations?
The holder design is intended to keep batteries from slipping even when mounted at different orientations, including sideways or upside down setups.
Final verdict
The Crivnhar 5-pack is a solid choice for RIDGID 18V owners who want reliable, off-the-bench battery organization with quick access. It is best when you are confident your batteries match the supported models, and you are willing to take your time aligning the mounts for a clean look.
Specifications
| Product Title | Battery Mount Holder Compatible for RIDGID 18V Batteries, Wall Mounts Hanger Fit for L1815R B1820R L1830R B1830R B1820, Organize Garage/Workshop/Work Truck(5 Pack, w/20 Screws, No Battery) |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | Crivnhar |
| Manufacturer | Crivnhar |
| Model Number | B09WQGLR63 |
| Color | 5 Pack, Orange For L1815R |
| Material | ABS plastic |
| Item Weight | 28 Grams |
| Brand Name | Crivnhar |
| UPC | 736961512732 |
| Set Name | Battery Holder Set |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Unit Count | 5 Count |
| Material Type | ABS plastic |
| Mounting Type | Wall Mount |
| Finish Types | Powder Coated |
| Finish Type | Powder Coated |
Available variants
Color
- 10 Pack, Yellow For DCB204
- 10 Pack, Blue For BL1850
- 5 Pack, Blue For BL1850
- 5 Pack, Orange For L1815R
- 10 Pack, Red For 48-11-1828
- 6 Pack, Blue For KB524-03
- 5 Pack, Red For CMCB204
- 5 Pack, Orange For LBXR20
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
GlossyEnd Set of 4 - Two C and Two D Battery Storage Box (Clear)
The GlossyEnd set includes four clear plastic battery storage boxes, designed specifically for organizing C and D batteries. Snap lids and built-in separation help keep fresh and dead rechargeable batteries apart, but the boxes are not water resistant, so they are best for indoor storage and light travel use.
ENGPOW Battery Organizer, Fireproof Battery Organizer Storage Case with Tester (BT168)
The ENGPOW BT168 is a soft, zipper-closed battery storage case designed to hold 220+ mixed battery types while keeping them separated in foam cutouts. It adds a battery tester for quick “what to recycle” checks and aims to reduce risk with fire-retardant, water-resistant materials. It is best for households that want a single place for AA/AAA/C/D/9V and common button batteries, but it has a fixed slot layout, so niche battery shapes may not fit perfectly.
Battery Organizer Storage Box, Garage Case Holder for 24* AA, 30* AAA Batteries (white)
This ALCYON battery organizer storage box keeps up to 54 AA and AAA batteries separated in pre-cut foam slots for faster, cleaner storage. It has a secure latch lid and a wall-hanging clip option, but buyer feedback suggests it is best for home cabinet use rather than rough transport.