1Zero Replacement Suction Cup Car Mount for CarPlay Screen with Quick Extension Arm, Compatible with 7-11 Inch Portable Car Play Screens
Quick take
This suction-cup mount is built for portable CarPlay-style screens between 7 and 11 inches, giving you either dashboard mounting (with a sticky pad) or windshield mounting (with an anti-UV film). The main appeal is the quick extension and one-hand, push or pull adjustments for getting the angle right. The key caveat is fit, since it relies on a standard 4-hook cradle-style bracket for compatible screen mounts.
Pros and cons
Pros
- Tool-free one-hand adjustment with a ball plunger arm that pivots and extends for finer screen positioning.
- Works with 7–11 inch portable CarPlay screens (and similar dash monitors/GPS units), using a 4-hook bracket cradle holder.
- Two mounting options: dashboard sticky pad or windshield suction cup (included anti-UV film).
- Designed for repeat use, with guidance to rinse and re-dry the suction for renewed stickiness.
Cons
- Best fit depends on cradle compatibility, since the mount uses a specific 4-hook cradle holder approach.
- Angle may require placement planning, because screen position can affect visibility from the driver seat.
What buyers think
Buyer feedback is largely consistent around two themes: adjustability and retention. Multiple reviewers describe the extension arm as stable once set, and they report the mount holding securely without dropping. Several buyers specifically mention using it to replace an original suction cup setup that did not stay stuck, noting that the replacement suction felt stickier and more reliable over changing seasons. There is also limited but relevant feedback that installation is straightforward and that the mount can work for placement experiments when the dashboard location is less than ideal.
Who this mount is for
Choose this 1Zero car mount if you have a portable CarPlay or Android Auto-style screen in the 7 to 11-inch range and you want a replacement suction setup that can go on either your dashboard or windshield. It also suits similar use cases like mounting a GPS unit, dash cam, or other monitor that uses a compatible cradle interface.
Who should skip it
- If your screen’s mounting interface is not compatible with a standard 4-hook bracket cradle holder, this may not connect cleanly.
- If you want a permanently mounted solution (for example, hardwired or dash-pane style installations), a suction mount may feel like the wrong category.
Key features that matter in real installs
One-hand adjustment for screen angle and reach
The arm is designed for quick positioning, with a push or pull mechanism to extend and pivot. The pivot range and extension are meant to help you route the screen into a comfortable viewing angle, especially if your vehicle’s dashboard is unusually tall or if the best viewing location is not right at the center.
Windshield and dashboard mounting, with included adhesion support
This mount includes both the suction cup approach for the windshield and a sticky dashboard pad. For windshield use, it also comes with an anti-UV film, which is a practical detail for cars that see lots of sun. For dashboard use, the sticky pad is intended to create a stable bond, and the suction is described as reusable with rinsing and air drying.
Replacement-oriented design
Because this is positioned as a replacement suction cup car mount, it targets one common buyer problem: the original suction setup that will not hold consistently. Feedback from buyers aligns with that, with many describing improved retention compared with older suction cups.
Pros and cons in context
- Pros: fast adjustment, dual mounting options, and feedback that the mount stays in place better than some original suction parts.
- Cons: you must verify cradle compatibility for your specific screen, and screen placement is still something you may need to fine-tune so it does not block the driver’s view.
Price and availability
Check current pricing and stock status on the product page. This type of replacement mount is often a lower-cost way to restore a previously purchased portable screen setup, but the exact value depends on how well your screen’s cradle interface matches.
Alternatives to consider
If you are comparing mount categories, think about what you want most: suction flexibility, a fixed dash mount, or a more permanent solution.
- Dashboard or windshield hard mounts (non-suction): can reduce movement over time but typically involve more setup effort and permanence.
- Vent or CD-slot style mounts: may be easier in some vehicles, but they can be less ideal for heavier or larger screens and can be more restrictive for viewing angles.
- Universal monitor arms: often give more positioning options, but you still need to match the attachment method and screen weight.
Verdict
The 1Zero replacement suction cup car mount is a solid choice for drivers who need a 7 to 11-inch portable CarPlay-style screen mount that offers quick, tool-free angle adjustment and dual mounting options. If your screen uses a compatible 4-hook cradle holder and you want a suction-based solution to replace an unreliable original, this is the kind of practical upgrade that many buyers look for.
FAQs
Is this mount compatible with all CarPlay screens?
It is designed for 7 to 11-inch portable CarPlay screens and similar devices that use a standard 4-hook bracket cradle holder. If your screen’s mounting cradle does not match that style, you may need a different mount.
Can I mount it on the dashboard and the windshield?
Yes. The package includes both a dashboard sticky pad and a windshield suction cup setup, along with an anti-UV film for windshield use.
How do I adjust the screen position?
The arm supports one-hand adjustment using a push or pull mechanism. It can pivot and also extend, helping you fine-tune the viewing angle.
Will the suction cup stay in place over time?
Many buyers report the mount holds securely, and some specifically mention it performs better than an older suction part they were replacing. Like all suction mounts, performance depends on surface cleanliness and correct installation.
What’s included in the box?
You get the suction cup car mount, a sticky dashboard pad, an anti-UV film for windshield mounting, and an installation guide.
Specifications
| Product Title | 1Zero Replacement Suction Cup Car Mount for CarPlay Screen with Quick Extension Arm, Compatible with 7-11 Inch Portable Car Play Screens, Adjustable Dashboard Windshield in-Car Monitor Bracket Holder |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Vehicle Electronics Accessories > Car Dash Mounting Kits |
| Brand | 1Zero |
| Manufacturer | Epeius International Inc Limited |
| Model Name | EP-S02+-BK |
| Model Number | EP-S02+-BK |
| Color | Black |
| Item Weight | 0.16 Kilograms |
| Compatible Devices | Monitors |
| Compatible Phone Models | for 7"-11" Portable CarPlay Screens |
| Mounting Type | Windshield, Dashboard |
| Additional Features | Adjustable, One-Hand Operation, Rotatable |
| Compatible with Vehicle Type | Automobile, Truck |
| Unit Count | 1.0 Count |
| Shape | Rectangular |
| Warranty Description | 2 Year |
| Built-In Media | Portable Monitor Suction Cup Car Mount |
| Enclosure Material | Acrylonitrile Butadiene Styrene |
Recommended next
Sound-Way Car Stereo Double DIN Universal Cage with Frame, Installation Dash Kit Mounting Metal Fitting Cage
The Sound-Way double DIN cage and trim frame kit is a budget-friendly way to mount an aftermarket head unit securely in a compatible dash cutout. It includes a metal cage for vibration resistance, a plastic surround frame, and the hardware/keys typically needed for installation. The main catch is fitment: it’s built for specific double DIN dimensions, and it may be frustrating if your dash opening or trim needs don’t match.
Scosche ICCR6BN Double DIN Radio Installation Dash Kit Compatible with select 2007–2019 Chrysler, Dodge, Jeep and RAM vehicles
The Scosche ICCR6BN is a vehicle-specific double DIN dash kit for select 2007–2019 Chrysler, Dodge, Jeep, and RAM models. It’s designed to help you mount an aftermarket head unit in the factory location with a wiring harness and antenna adapter, minimizing the need to cut factory wires. The main tradeoff: it’s not meant to retain steering wheel controls, and some installs may require light trimming or small bezel adjustments for a perfect look.
ASC Audio double DIN car stereo install kit and wire harness made for Honda
If you are installing an aftermarket double DIN radio in select Honda models from the late 1990s through the 2000s, this ASC Audio dash kit plus wiring harness can make the swap cleaner and more plug-and-play. Buyers generally report good fit and clear instructions, but some mention tabs or trimming details can be model-specific and the plastic bezel can feel a bit delicate during disassembly.
Grey Gray Complete Single Din Dash Kit + Pocket Kit + Wire Harness + Antenna Adapter Compatible with Chevrolet & GMC 1988-1996 Select Models
This complete single-DIN dash kit (with pocket kit, color-matched wire harness, and antenna adapter) is made for select 1988-1996 Chevrolet and GMC full-size trucks, SUVs, and related models. It’s designed to reuse factory dash mounting points for an easier install, and buyers frequently mention an OEM-looking finish and a close grey color match. The main tradeoff is that the harness setup still requires basic radio-wire connections (for example, crimping or soldering pigtails).