10pcs CR2032 Button Battery Holder 2 Pin DIP Coin Cell Battery Socket
Quick take
This 10-pack provides 2-pin DIP CR2032 coin cell battery holders for projects where you want a simple PCB mount and easier future battery changes. It is a popular fit for Nintendo GameCube clock battery replacements, but clearance and pin geometry may not suit every compact device case, so check dimensions before committing.
Pros and cons
Pros
- Made for CR2032 cells, with a 2-pin DIP plug-in design for PCB mounting.
- Stainless spring contacts help hold the battery in place for convenient swaps.
- Includes 10 holders, useful for one repair plus spares.
- Commonly used successfully for GameCube clock battery replacement when soldered in place.
Cons
- Build is described as “flimsy” by some buyers, which can matter for careful handling during installation.
- Fit is not guaranteed across all devices, especially if the holder is too tall for a specific casing.
- Best suited for battery replacements where soldering and PCB access make sense, not for devices requiring a different mounting style.
What buyers think
Buyer-review evidence centers on one clear use case, GameCube clock battery replacements. Installers report the legs/pin spacing can line up well when replacing an older soldered battery tab, and once soldered, the holders make later battery swaps easier.
Key specs that drive compatibility
To decide whether this holder matches your project, focus on the physical form factor and mounting pattern.
Battery type and electrical
- Battery type: CR2032 coin cell.
- Rated voltage: 3V.
- Contact style: stainless steel spring lamination to secure the battery.
Mounting and size
- Connector style: 2-pin DIP plug-in design.
- Pin pitch: 20mm.
- Holder size: 22.1mm diameter, 8.7mm height.
- Plastic shell: flexible polypropylene (black).
If your device has limited vertical clearance, the 8.7mm height is the spec to double-check, because some housings may leave insufficient room for a taller holder.
Pros, cons, and the right buyer fit
Best for
- PCB-mounted CR2032 replacements where you can solder or mount a 2-pin DIP footprint.
- Device clock battery swaps similar to GameCube clock replacements, where the goal is easier future maintenance.
- Hobby repair and small electronics projects needing a small quantity plus backup spares (10-pack).
Who should avoid it
- Projects without enough clearance for an 8.7mm-tall holder. If the casing is tight, the holder may not sit flush.
- Repairs requiring a different connector style (for example, a tabbed battery system or a different pitch/footprint).
- Installations where you cannot solder or secure pins and need a purely snap-in solution.
Installation considerations that affect results
These holders are designed for PCB mounting, so the installation method matters. If you are replacing a soldered coin cell connection, aim for a stable mount so the spring contacts consistently press onto the CR2032. Also, if you plan to reuse the device’s casing, test for clearance before fully closing it, since a slightly too-tall holder can cause a bulge or require forcing, which is usually a sign the fit is not right.
Value: is it worth buying?
This is typically worth it when you want a practical, repeatable way to run a CR2032 in a compact device and you expect to perform at least one battery replacement during ownership. The 10-pack is especially useful for keeping spares or doing multiple repairs. The main value tradeoff is that you may need to verify fit for your specific device’s casing and pin pitch, since compatibility problems show up more from physical clearance than from the battery holder’s function.
Comparison guidance (how to choose an alternative)
If you are comparing other CR2032 holders, choose based on these three criteria:
- Mounting footprint: confirm the pin pitch and whether you need 2-pin DIP for your PCB layout.
- Height and diameter clearance: check holder height against your device’s housing.
- Contact style: spring-contact holders are usually better when you want easier battery swaps than soldering the battery itself.
If your device’s space is extremely limited or you need a different mounting method, look for a slimmer or differently shaped CR2032 holder rather than forcing this one to fit.
Verdict
The 10-pack CR2032 2-pin DIP coin cell battery holders are a strong choice for PCB-based CR2032 replacements, with buyer feedback highlighting effective GameCube clock battery installation. If your project has tight casing tolerances or uses a different mounting arrangement, measure carefully first, because clearance and fit can be the difference between a clean install and a forced, imperfect close.
FAQ
Will this holder work with any CR2032 device?
It is designed specifically for CR2032 coin cells and uses a 2-pin DIP plug-in style with a specified pin pitch. Whether it works depends on your device’s PCB footprint and, especially, the available clearance for the holder height (8.7mm).
What are the most important measurements to check?
Check the pin pitch (20mm), the holder height (8.7mm), and the overall diameter (22.1mm). If your device casing is tight, clearance is the most common reason holders do not sit correctly.
Is it difficult to install?
Because it is intended for PCB mounting, installation generally involves soldering or securing the pins. Buyers who used it for console clock battery replacements report it is straightforward if you are comfortable with soldering and aligning the pin spacing.
How many holders do you get?
The package includes 10 CR2032 battery holders.
Can it be used for projects other than GameCube repairs?
Yes, as long as your project matches the CR2032 battery type and your PCB/casing supports the 2-pin DIP footprint and the holder dimensions.
Specifications
| Product Title | 10pcs CR2032 Button Battery Holder 2 Pin DIP Coin Cell Battery Socket |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | RuiLing |
| Manufacturer | RuiLing |
| Model Name | CR2032 |
| Model Number | CR2032 |
| UPC | 732661160587 |
| Battery Capacity | 3 Volts |
| Voltage | 3 Volts |
| Reusability | Single Use |
| Unit Count | 10 Count |
| Antenna Location | Watch |
| Recommended Uses For Product | Watch |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
Kwikset Battery Holder for 909, 910, 911, 912 Series SmartCode Deadbolts and Levers 83307
A replacement battery holder (Kwikset part 83307-001) made for specific Kwikset SmartCode 909/910 deadbolts and 911/912 levers. Buyers report a straightforward swap that restores lock function and can be a cheaper fix than replacing the whole keypad lock, with the main caveat being compatibility. Make sure you have the right series and part number before ordering.
9V Battery Connector,10 PCS T-Type 9 Volt Buckle Connector Hard Plastic Shell Used in Student Experiment,or Other Equipment with Battery
This 10-pack of 9V T-type battery connectors is built for quick DIY wiring and replacing worn-out 9V battery leads. With a hard plastic shell for protection and tin-dipped wire ends for easier connection, it is a practical choice for school experiments and small electronics fixes, as long as you are using 9V batteries only.
JJC AA AAA Battery Case Holder for 20 Double A and 14 Triple A with Removable Tester
The JJC AA/AAA battery case holder stores up to 20 AA and 14 AAA batteries in snug slots, helping prevent shorting and keeping cells organized. A removable AA/AAA tester with three indicator levels adds convenience, while the hard ABS shell, foam lining, snap closure, and silicone sealing ring are designed for everyday protection from dust, moisture, and shock. Best for anyone who wants a dedicated, compact home or garage organizer, with the caveat that the tester provides a rough status check, not a precision measurement.