Kwikset Battery Holder for 909, 910, 911, 912 Series SmartCode Deadbolts and Levers 83307
Quick take
This Kwikset battery holder replacement (model 83307, part number 83307-001) is designed for specific SmartCode models, including 909 and 910 series deadbolts, and 911 and 912 series levers. It is a practical way to restore power delivery when corrosion damages the original battery cage. The main buying caveat is fit and compatibility, so verify your lock series and part match before you order.
Pros and cons
Pros
- Targeted replacement for Kwikset SmartCode 909/910 deadbolts and 911/912 levers (part 83307-001).
- Buyers describe an easy, proper fit that functions like the original battery compartment.
- Can be a lower-cost alternative to replacing the entire keyless entry device when battery corrosion causes failure.
- Works well after battery maintenance, based on long-term replacement use reported by buyers.
Cons
- Compatibility is crucial, some buyers report needing the correct version because another version did not fit.
- This is not a “smart” battery accessory, it is a hardware replacement, so it will not add new features.
- If corrosion has damaged more than just the battery holder terminals, you may still need additional troubleshooting.
What buyers think
Buyer-review evidence is strongly centered on fit and functionality. Multiple reviewers report that the holder replaced the original unit cleanly, matched the lock’s operation, and allowed the lock to work again after battery-related corrosion. A recurring theme is value, with the replacement described as inexpensive compared with replacing the entire lock system when the battery cage had deteriorated. Some review evidence also highlights that choosing the wrong version can lead to poor fit, so confirming compatibility matters. Overall, buyer sentiment is limited to these practical use themes, with not much detail available on technical specs beyond “works” and “perfect fit.”
What this battery holder is (and what it is not)
The Kwikset Battery Holder 83307 (83307-001) is a replacement battery cage assembly intended for specific Kwikset SmartCode deadbolts and levers. Its purpose is simple: provide the battery compartment and electrical connection needed for the lock to power up and run normally.
It is not a controller upgrade, not a smart-home device, and not a universal “one size fits all” battery holder. If your lock model is not one of the compatible series, the holder may not fit or work as expected.
Compatibility checklist before you buy
To avoid ordering the wrong part, confirm all of the following:
- Your lock series matches the supported Kwikset lines, including 909 and 910 series deadbolts, and 911 and 912 series levers.
- The replacement part number aligns with this battery holder, Kwikset 83307-001.
- Make sure you are replacing a battery holder assembly (battery cage), not a different internal component.
If you are unsure, double-check the lock model markings and part numbers before proceeding.
Who this is best for
- Homeowners and DIY fixers who want to restore a working SmartCode lock after battery corrosion or battery-cage damage.
- Buyers who want the OEM-style match for 909/910 deadbolts or 911/912 levers, rather than experimenting with a generic battery holder.
- Anyone trying to lower cost compared with replacing the entire keypad lock when the issue appears to be localized to the battery compartment.
Who should skip it
- Buyers with an incompatible Kwikset SmartCode model, since these replacement parts are not universal.
- Buyers who suspect the problem is not the battery compartment (for example, an issue elsewhere in the electronics or wiring). In those cases, replacing the holder may not fully resolve the fault.
Pros and cons in real-world terms
Why it tends to work out
When the holder is the correct match, buyers commonly describe it as fitting the way the original did and bringing the lock back to normal function. It is especially useful when corrosion has made battery terminals unreliable, since the holder swap restores a fresh battery cage.
The tradeoffs to consider
The biggest drawback is the potential for ordering the wrong version. If your lock is from a different series or the part number does not match, you may run into fit issues. Also, if corrosion has spread beyond the holder itself, additional repairs or deeper troubleshooting could be necessary.
Alternatives to consider
- Replace the entire SmartCode lock: best if the failure is not isolated to the battery compartment, or if you prefer a fresh unit over targeted repairs.
- Keep and repair the existing battery cage: only makes sense if corrosion is minimal and terminals are still salvageable. If the holder is significantly damaged, replacement is often the more straightforward route.
- Find the correct OEM replacement for your exact model: if your lock series is close but not exact, verify the right battery holder part before you commit.
Price and availability
This is a budget-priced replacement part category item. Availability can vary by retailer, but it is typically offered as a single replacement unit, sold under Kwikset part number 83307-001. Check the latest listing for current pricing and shipping to your area.
Bottom line
If you have a compatible Kwikset SmartCode 909/910 deadbolt or 911/912 lever, this battery holder replacement is a sensible, low-cost fix when corrosion or battery-compartment failure is the likely culprit. Just be meticulous about compatibility, because ordering the wrong version is the clearest buyer-fit risk.
FAQ
What locks is the Kwikset 83307 battery holder compatible with?
It is intended for Kwikset SmartCode deadbolts and levers in the 909 and 910 series (deadbolts) and the 911 and 912 series (levers), using Kwikset part 83307-001.
Is this battery holder universal for any Kwikset SmartCode?
No. Battery holders are model specific, and buyers report that the correct version matters for fit.
What symptom does this part typically fix?
It is commonly used when battery corrosion damages the original battery cage or terminals, which can prevent the lock from getting reliable power.
Will this add smart features to my lock?
No. This is a hardware replacement part for the battery compartment, not a feature upgrade.
Should I replace the whole lock instead?
If you are confident the issue is isolated to the battery holder, replacing the holder can be cheaper. If the lock failure is likely elsewhere in the electronics, replacing the entire unit may be the more effective option.
Specifications
| Product Title | Kwikset Battery Holder for 909, 910, 911, 912 Series SmartCode Deadbolts and Levers 83307 |
|---|---|
| Category | Electronics > Household Batteries, Chargers & Accessories > Battery Holders |
| Brand | Kwikset |
| Manufacturer | Kwikset |
| Model Name | Kwikset 909 910 911 912 SmartCode Deadbolts Levers |
| Model Number | 83307 |
| Color | Unfinished |
| Material | Most likely a metal alloy, such as steel or aluminum, or a durable plastic |
| Item Weight | 0.01 Pounds |
| Brand Name | Kwikset |
| Recommended Uses For Product | replacement battery holder for specific Kwikset lock models |
| Number of Pieces | 1 |
| UPC | 883351244817 |
| Unit Count | 1.0 Count |
| Manufacturer Part Number | 83307-001 |
| Additional Features | Touch Unlock |
| Lock Type | Key Lock |
| Controller Type | Mechanical knob |
| Control Method | Touch |
| Smart Home Compatibility | Not Smart Home Compatible |
| Style Name | Compact |
| Material Type | Most likely a metal alloy, such as steel or aluminum, or a durable plastic |
| Finish Types | Unfinished |
| Item Dimensions | 3.5 x 2.4 x 0.39 inches |
| Special Feature | Touch Unlock |
| Item dimensions L x W x H | 3.5 x 2.4 x 0.39 inches |
Recommended next
Comecase Battery Organizer Storage Case, Battery Vault Carrying Container Bag review
The Comecase battery organizer storage case is a high-capacity, EVA foam-lined holder designed to keep AA, AAA, C, D, 9V, and button-cell batteries separated and easier to find. A removable BT-168 digital tester is included to quickly check 1.5V and 9V battery power, but it is not meant to replace a charger, and the organizer can be a bit labor-intensive to set up when you first remove the foam pieces.
ENGPOW Battery Organizer, Fireproof Battery Organizer Storage Case with Tester (BT168)
The ENGPOW BT168 is a soft, zipper-closed battery storage case designed to hold 220+ mixed battery types while keeping them separated in foam cutouts. It adds a battery tester for quick “what to recycle” checks and aims to reduce risk with fire-retardant, water-resistant materials. It is best for households that want a single place for AA/AAA/C/D/9V and common button batteries, but it has a fixed slot layout, so niche battery shapes may not fit perfectly.
Parts Express Battery Holder for (4) AA with Standard Snap Connector : BH341
The Parts Express BH341 battery holder is a compact 4xAA holder designed to integrate with a standard snap connector, commonly used as a replacement in radios and other devices like safes. Reviewers consistently describe it as an easy, low-cost fix for damaged or corroded holders, with the main catch being that the 9V snap clip type connection is required (sold separately).
8 Pack AA Battery Holder Bundle with Wire 1 AA Battery Holder 1.5V, 2 Pcs, 2 AA Battery Holder 3V, 2 Pcs, 3 AA Battery Holder 4.5V, 2 Pcs, 4 AA Battery Holder 6V, 2 Pcs
This QTEATAK AA battery holder bundle groups multiple AA holder sizes with pre-wired leads, making it convenient for DIY builds, breadboards, LED drivers, and low-voltage projects. The main tradeoff is electrical resistance at the spring contacts, which is usually fine for typical electronics but matters for very current-sensitive designs.