Yojaro Silicone Suction Cup Phone Case Mount Double Sided, Phone Accessories Hands-Free Strong Grip Holder for Selfies and Videos, Light Pink
Quick take
This Yojaro double-sided silicone suction cup phone case mount is made for hands-free selfies, video recording, and calls by attaching to smooth, clean surfaces. It is built with many suction cups for steadier hold, but it is not a universal solution, textured cases and unclean surfaces can reduce grip.
Pros and cons
Pros
- Double-sided suction cup design intended for more stable holding on smooth surfaces
- Uses multiple suction cups (40 total) to help reduce wobble during quick use
- Works as a flexible stand concept for filming on mirrors, windows, and other clean glass-like areas
- Lightweight, simple to set up for quick GRWM and short video sessions
Cons
- Buyer feedback suggests it does not grip well on textured phone cases
- Grip depends heavily on surface cleanliness and smoothness, dirty or not-ideal surfaces can reduce holding
- Suction can weaken over time, so it is better for shorter sessions than extended mounting
- May slide when supporting the phone if adhesion conditions are not right
What buyers think
Buyer-review evidence is limited but consistent on a few practical points. The main upside is convenience for hands-free content, with multiple buyers describing the setup as easy and the suction as stronger than expected for quick filming routines. The most repeated limitation is adhesion, specifically it tends to perform best on clean, smooth surfaces and can underperform with textured cases or when the mounted surface is not properly prepped. There are also reports that it may hold the suction to the surface but still allow the phone to slide if the conditions are not ideal.
What this mount is, and how it fits real use
The Yojaro mount is designed to let you attach your phone to smooth surfaces for selfies, video calls, and recording-style content. Instead of relying on a traditional clip or clamp, the system uses silicone suction cups on both sides, intended to create a more stable connection between your phone case and the surface you are mounting to (like mirrors or glass).
Key features that matter when you are filming
Double-sided suction cup design
Because the suction cups are on both sides, the mount is meant to help you keep the phone steady while you record. That matters for vertical video framing, speaking to camera, and short, repeatable takes.
Multiple suction cups for steadier hold
The mount is built with 40 independent suction cups, which is aimed at improving stability compared with simpler single-cup-style grips. In practice, buyers describe it as surprisingly strong for its look, particularly when conditions are right.
Compatibility depends on surface and case style
It is intended to attach to a smooth phone case. If your case has noticeable texture or raised patterns, adhesion may be less reliable, which is an important consideration if you are trying to mount consistently for content.
Pros and cons for different buyers
Best for
- People who mostly film quick videos or do short routines and want hands-free framing
- Shoppers who use mirrors, windows, or other clean, smooth surfaces for mounting
- Budget-conscious buyers looking for a simple suction-cup phone stand concept
- Anyone comfortable re-mounting if the suction loses grip
Who should avoid it
- Buyers with textured or highly patterned phone cases, since adhesion may be weaker
- Anyone who needs long, worry-free mounting sessions, since suction can weaken over time
- Shoppers who plan to mount on rough, dusty, or non-smooth surfaces
Buying guide: how to get the most grip
- Start with a clean surface. Suction performance improves when the mirror, glass, or mounting area is free of dust, oils, and residue.
- Check your case finish. If your case has texture, expect reduced adhesion, and consider how you will handle that (for example, smoothing the contact area).
- Keep sessions short. Suction strength can gradually weaken, so treat it as a tool for shorter takes rather than permanent mounting.
- Test before recording. Give it a quick stability check so you can avoid a slide mid-take.
Price and availability
The listed price is budget-friendly compared to many branded phone mounts, and it is currently shown as in stock. If you are trying to decide between spending more on a sturdier mechanical stand versus using suction for occasional hands-free filming, this is the lower-cost category with more reliance on the mounting conditions.
Verdict
The Yojaro double-sided silicone suction cup phone case mount is a practical pick for hands-free selfies and video on smooth, clean surfaces, especially when your use is focused on short content sessions. Just be realistic about the key tradeoff: grip is highly dependent on smooth surfaces and a case that allows strong suction. If your setup is textured or your filming environment is not consistently clean and smooth, you may find it less reliable than you want.
FAQs
Will this suction mount work on textured phone cases?
It is intended to attach to a smooth phone case, and buyer feedback suggests it may not grip well on textured cases. If your case has raised texture, adhesion and holding power may be inconsistent.
What surfaces does the suction work best on?
It works best on smooth, clean surfaces such as mirrors and glass. Cleanliness and surface smoothness are major factors in whether the mount stays put.
Does it hold the phone securely for long videos?
Suction strength can gradually weaken over time, so it is best treated as a shorter-session mount. For longer recording, you will likely want to re-check the grip and remount as needed.
Can the suction cups be removed and reused?
Yes, the design is intended to be removable and reusable rather than a permanently attached single-sided style.
Is it worth buying if I just need a simple desktop-style stand?
If you are okay with using it as a suction-based stand on a clean, suitable surface, it can be a convenient option. If you want something that is consistently secure across more surfaces, you may prefer a traditional stand design.
Specifications
| Product Title | Yojaro Silicone Suction Cup Phone Case Mount Double Sided, Phone Accessories Hands-Free Strong Grip Holder for Selfies and Videos, Silicon Phone Stand for iPhone and Android Light Pink |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Grips |
| Brand | Yojaro |
| Manufacturer | Yojaro |
| Model Number | Double-sided Suction Cups |
| Color | Light Pink |
| Material | Silicone |
| Additional Features | silicone |
| Grip Type | Double-sided Suction Cups |
| Mount Type | Case Mount |
| Theme | Tech |
| Pattern | silicone |
| Enclosure Material | Silicone |
| Item Dimensions | 3.94 x 2.52 x 0.27 inches |
| Mfr Part Number | Double-sided Suction Cups |
| Warranty Description | 3 Months |
| Item Type Name | Suction Cup |
| Built-In Media | Double-sided Suction Cups |
| Unit Count | 1.0 Count |
| Special Feature | silicone |
Available variants
Color
- Reddish Brown Glitter
- Sky Blue
- Light Pink Glitter
- Black
- White Glitter
- Green
- Pink Glitter
- White
- Blue Glitter
- Light blue
- Translucent
- Translucent Glitter
- Purple
- Dark Pink
- Pink
- Black, White, Translucent, Light Pink
- Lavender Glitter
- Lavender
- Light Pink
- Black Glitter
Recommended next
PopSockets Phone Grip for MagSafe, Magnetic Holder, Phone Stand, Cute Pink - Aura
The PopSockets Aura MagSafe phone grip combines a magnetic snap-on hold with a collapsible stand for hands-free viewing. It’s a strong fit for MagSafe iPhone users and people who want faster attachment than adhesive, with a key caveat: it generally needs a compatible MagSafe case (not silicone or textured cases) to work as intended.
PopSockets Adhesive Phone Wallet and Card Holder with Grip - Black
The PopSockets Adhesive Phone Wallet and Card Holder with Grip - Black combines a slim card holder (for about 3–5 cards) with a grippy, drop-prevention PopWallet design that also adds an easy kickstand. It uses a strong adhesive base that works best on smooth, hard plastic cases, and its main tradeoff is value if you are price-sensitive.
TELESIN Fun Shot Magnetic Phone Camera Grip + C03 Magnetic Selfie Light (Silver) Bundle Kit
The TELESIN Fun Shot Magnetic Phone Camera Grip + C03 Magnetic Selfie Light is a creator kit that pairs a Mag*Safe-style magnetic phone grip with a bright, rotatable LED selfie light. It is best for iPhone and Android users who want one compact setup for selfies, video calls, and content without adding a separate tripod, but you should confirm app compatibility for the shutter button in TikTok-style workflows.
Lamicall Cell Phone Ring Holder Stand - Phone Finger Grip Kickstand, 360° Rotation Polished Metal Grip for Magnetic Car Mount
A polished zinc-and-stainless steel phone ring that adds one-handed grip, a foldable kickstand feel, and easy rotation for portrait or landscape use. Buyers highlight strong, durable performance and reliable holding power, especially when paired with a magnetic car mount, with the main caveat being adhesive compatibility (it is not intended for all soft cases) and ring comfort for larger or smaller fingers.