Yojaro 4Pack Silicone Suction Phone Case Mount, Silicon Adhesive Smartphones Stand Sticky
Quick take
This Yojaro 4-pack uses a silicone suction grip with multiple suction cups and an adhesive-backed attachment that sticks to the back of a phone case. It is aimed at hands-free selfies, videos, and video calls on smooth surfaces like glass and mirrors, but buyer feedback suggests the adhesive can wear over time, and reliability may vary by phone case and surface smoothness.
Pros and cons
Pros
- Designed to create a stable hold on smooth surfaces (mirrors and glass are specifically noted).
- Easy to use, with an adhesive backing that sticks to a regular phone case.
- Multiple suction cups (24) are intended to improve grip and stability.
- Comes as a 4-pack, which can help if you want backups or different setups.
Cons
- Adhesive longevity appears to be a weak point, with some reports that stickiness wears off after weeks to about a month.
- Not suitable for rough or uneven surfaces, and grip can weaken if the suction area gets dirty.
- Because it is adhesive-based, removing it from a phone case may not be clean or reusable.
What buyers think
Buyer-review evidence is mixed. Several shoppers describe it as easy to install, compatible with their phone case, and capable of staying attached for extended periods on smooth surfaces like mirrors. At the same time, other feedback points to adhesive durability concerns, including reports that the sticky backing can come off the phone case and that suction performance did not hold as expected for certain setups, leading to a serious drop and screen damage. Overall, the pattern suggests it can work well for casual hands-free use on clean, smooth surfaces, but you should treat it as a “surface and case dependent” mount rather than something guaranteed to hold in every circumstance.
How it works (and what to expect)
The mount is a silicone suction phone grip that uses an adhesive film to attach to the back of your phone case. After it is fixed to the case, the phone can then be placed on smooth surfaces where the suction cups adhere.
Key setup realities to plan for:
- Surface matters. It is meant for smooth surfaces such as mirrors and glass, not rough walls or uneven materials.
- Adhesion needs clean contact. Dust on the suction surface can reduce grip, so wiping with a damp cloth may help restore stronger suction.
- Adhesive strength can fade. Suction power is noted to gradually weaken over time, and the device is suggested for short sessions at a time (up to 30 minutes).
- It is not built for repeated removal. Once the suction cup grip is attached to a phone case, it cannot be removed and reused.
Pros and cons in real-life use
Good fit for
- Hands-free recording or video calls in areas with glass or mirror surfaces (kitchen, bathroom, gym studio type setups).
- Casual content creators who want a simple way to set the phone up without a tripod.
- People who can keep the surface clean and who understand placement consistency is important.
Potential mismatches
- Anyone planning to mount on textured or uneven surfaces where suction may not create a proper seal.
- Buyers who need long-term, always-on reliability for critical moments, since adhesive performance may decline over time.
- People who do not want adhesive changes to their phone case, because attachment is described as not removable and reusable after application.
Compatibility and sizing considerations
The mount is intended to work with smooth surfaces and to attach to “almost any flat phone case.” It is designed for common iPhone and Android cases, and the listing specifically calls out iPhone compatibility. Still, there is enough conflicting buyer experience to treat fit as case dependent. If your case has unusual texture, curves, or is not compatible with the adhesive placement, performance may suffer.
Mount size is listed as 3.15 x 2.17 x 0.2 inches, and the suction kit uses a 24-suction-cup design. If your case back is tight, bulky, or hard to position flat, you may need to test placement carefully.
Price and availability
This is a low-cost, 4-pack grip mount option (listed around $4.99). If you are buying on a tight budget and want backups, the multi-pack format can make sense. If your priority is dependable holding for expensive devices, consider whether you want adhesive-on-case mounting or a different mount style that does not rely on changing adhesion over time.
Alternatives to consider
If you mainly need hands-free stability and you frequently film in non-glass locations, you may want to compare other phone mount categories that prioritize mechanical stability (for example, cases with built-in kickstands, clamp mounts, or tripods). The right choice depends on whether your content setup is mostly glass/mirror-based, or whether you need consistent holding across varied surfaces.
Verdict
The Yojaro 4-pack silicone suction phone case mount is a budget-friendly option for hands-free selfies and videos on smooth surfaces, with multiple suction cups and straightforward setup. The main drawback is durability variability, especially around adhesive longevity and grip reliability for every case and surface. If you plan to use it briefly, keep surfaces clean, and accept that adhesion can weaken, it can be a practical accessory. If you cannot risk a drop, you may want a mount type with more dependable physical stability.
FAQ
Will this stick to a mirror or glass?
Yes, it is specifically intended for smooth surfaces such as mirrors or glass. For best results, keep the suction area clean, and ensure the phone is firmly fixed before letting go.
Can I remove the suction grip from my phone case and reuse it?
No. The adhesive film attachment is described as not removable and not reusable after being attached to the phone case. It is recommended to apply it to a regular, not valuable, phone case.
Does it work on rough walls or wooden surfaces?
No, it is not applicable for rough walls or uneven surfaces. It performs best on smooth, even surfaces where suction can seal properly.
How do I keep suction power strong?
Regularly wipe dust off the suction surface. If needed, wipe the suction cup with a damp cloth to improve suction. Also note that suction power can weaken over time, so shorter sessions are recommended.
How long can I use it at one time?
Suction power is described as gradually weakening over time, and it is recommended to use it for a maximum of about half an hour at a time.
Get the latest price
Specifications
| Product Title | Yojaro 4Pack Silicone Suction Phone Case Mount, Silicon Adhesive Smartphones Stand Sticky, Hands-Free Phone Accessories Holder for Selfies and Videos (Black & White & Translucent & Light Pink) |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Grips |
| Brand | Yojaro |
| Manufacturer | Yojaro |
| Model Name | single-sided |
| Model Number | 24suction |
| Color | Black & White & Translucent & Light Pink |
| Item Weight | 0.04 Kilograms |
| Compatible Devices | iPhone |
| Compatible Phone Models | iphone |
| Mounting Type | Adhesive |
| Additional Features | silicone |
| Compatible with Vehicle Type | Automobile |
| Item Dimensions | 3.15 x 2.17 x 0.2 inches |
| Unit Count | 4.0 Count |
| Shape | routine |
| Enclosure Material | Silicone |
| Mfr Part Number | 24suction |
| Warranty Description | silicone |
| Built-In Media | silicone |
| Item Type Name | Suction Cup |
Available variants
Color
- Purple
- Black & White & Translucent & Light Pink
- White
- Light Gray
- Red
- Rose red
- Lavender
- Black
- Sky Blue
- Translucent
- Light Pink
- Pink
- Light Pink & White
- Light blue
- Dark Blue
- Dark Grey
Recommended next
AZXYI Very High Bond Sticky Adhesive, 9 Pack Adhesive Replacement for Socket Base, 1.4 inches Double Sided Sticker Tapes for Phone Collapsible Grip & Stand Base
AZXYI’s 9-pack of high-bond double-sided adhesive pads is designed to reattach a collapsible phone grip or socket base securely. Buyers report strong hold over multiple weeks, with clean removal when you follow the prep and cure steps, and a key tradeoff: you need a clean, dry surface and at least 24 hours before using.
Doflyesky Magnetic Phone Ring Holder with Magsafe, Double Adjustable Gym Finger Ring Grip
The Doflyesky magnetic phone ring holder combines a zinc-alloy ring grip with a MagSafe-compatible magnetic mount and a multi-angle kickstand. It’s designed to help with one-handed holding and hands-free viewing, but it may feel awkward for long holds and can be less comfortable or less reliable on some phone-case setups over time.
PopSockets Phone Grip for MagSafe, Magnetic Holder, Phone Stand, Cute Pink - Aura
The PopSockets Aura MagSafe phone grip combines a magnetic snap-on hold with a collapsible stand for hands-free viewing. It’s a strong fit for MagSafe iPhone users and people who want faster attachment than adhesive, with a key caveat: it generally needs a compatible MagSafe case (not silicone or textured cases) to work as intended.
![TORRAS 2025 Flagship Magnetic Phone Grip Ring Holder Kickstand [2-Sided Magnetic] [360 Rotation]](/product-images/019edfcb-dc8a-7faa-8950-ffff0f0ad357-0-3c95f5db18ec.webp)
TORRAS 2025 Flagship Magnetic Phone Grip Ring Holder Kickstand [2-Sided Magnetic] [360 Rotation]
The TORRAS 2025 magnetic grip ring doubles as a rotating hand grip and a multi-angle kickstand. It’s designed for MagSafe-style magnetic attachment, with an included metal ring option for non-magnetic cases, plus a pocket-friendly fold. The main tradeoff is that some users find the ring action and removal less effortless because the magnets are extremely strong.