YJXcell Cell Phone Booster for Home & Multi-Room (up to 7,000 sq ft)
Quick take
This YJXcell home cell phone booster is built to improve weak indoor coverage by amplifying signal across multiple rooms, with an advertised maximum gain of 70 dB and up to 7,000 sq ft of coverage depending on your exterior signal. It supports 5G and 4G LTE voice, text, and data on key U.S. carrier bands (5/12/13/17), and includes an outdoor log-periodic antenna plus two indoor antennas. The main catch is that boosters need usable signal at the outdoor antenna location, so homes with no incoming signal may not see meaningful improvement.
Pros and cons
Pros
- Multi-room focus with advertised coverage that can reach up to 7,000 sq ft (varies by starting signal).
- Supports 4G LTE and 5G where carriers use non-mmWave deployments, plus targeted band coverage (5/12/13/17).
- Includes antennas and emphasizes easy setup with a recommended outdoor-to-indoor antenna distance of about 32 ft.
- FCC and IC certified, designed to comply with carrier transmission rules.
Cons
- It will not work if there is no usable signal available to boost at the external antenna location.
- Coverage expectations depend heavily on where you can place the outdoor antenna and the signal level you can capture.
- 5G support is limited to the type of 5G carriers deploy in existing 4G bands, not mmWave.
What buyers think
Buyer-review evidence for this booster is limited in volume, but the recurring themes are consistent. Several reviewers report stronger reception in areas that previously had dead zones or unreliable signal, including multi-level homes. Setup is described as straightforward, with people emphasizing that following the included instructions helps them place antennas effectively. When signal improves, reviewers commonly mention fewer dropped calls and faster data performance for daily use like browsing and streaming. A few comments also highlight that direct line of sight at the external antenna location can matter for getting the best results.
Key features and specs that matter
Coverage range (and why it varies)
The booster is marketed for indoor coverage up to 7,000 sq ft, with performance tied to the signal strength at the external antenna location. The coverage estimate is given in ranges: weaker starting signals support smaller footprints, while stronger starting signals support larger ones. Practically, this means your results depend on how well you can “see” the signal source from where the outdoor antenna can be installed.
Frequency bands and what it means for compatibility
This model is designed for band 5/12/13/17. It also supports 5G alongside 4G LTE for voice, text, and data for major U.S. carriers that use these bands. If your area’s 5G coverage is deployed in ways that ride on existing 4G spectrum, you’re more likely to get meaningful 5G improvements. If you’re specifically chasing mmWave 5G, this booster is not intended for that use case.
Boost power and gain
Advertised maximum gain is 70 dB, with a maximum outpower of 17 dBm. Those figures indicate the amplifier’s ability to increase signal level, which can translate into better call stability and faster data when you already have at least some usable outside signal to amplify.
FCC and IC compliance
The booster is described as FCC and IC certified and designed to meet application standards. For buyers, the value here is that it is intended to operate in a regulated way, rather than as an unverified or unknown device.
How installation affects results
Installation is described as simple, but “simple” still requires smart placement. You’ll typically set up the outdoor log-periodic antenna and then position the indoor antennas where they can best cover the target rooms. The manufacturer guidance includes powering off during antenna installation or adjustments, and keeping the outdoor-to-indoor antenna distance around 32 ft. In real homes, the best outcome usually comes from choosing an exterior placement that captures a stable signal, then distributing indoor antennas to reduce dead spots across levels (basement, upstairs, and common areas).
Who this booster is best for
- Homes or small offices where you can get at least a moderate outside signal at a feasible antenna location.
- Multi-room layouts that need coverage across 2 to 3 rooms or more, especially across multiple floors.
- US carrier customers looking for an FCC/IC certified booster that targets bands 5/12/13/17.
- Buyers who want a straightforward installation workflow and are comfortable following antenna placement guidance.
Who should avoid it
- Anyone whose outdoor signal is truly absent, meaning there is nothing reliable to boost at the external antenna location.
- Buyers in areas that depend on mmWave 5G enhancements, since this model is not aimed at mmWave use cases.
- People who expect a guaranteed “works everywhere” outcome without verifying outside signal strength first.
Pros and cons recap
If your home has weak but present outdoor coverage, this booster’s multi-room approach, band support, and compliant design make it a practical option. If your outdoor signal is zero, or if you are specifically targeting mmWave-only 5G improvements, you are likely to be disappointed. In other words, the purchase decision should start with where the outdoor antenna can be mounted and how much usable signal you can capture there.
Price and availability
You can check the latest price and current availability for the YJXcell booster on Amazon.
Alternatives to consider (based on your priorities)
If you’re comparing category options, focus on these decision points: supported bands (to match your carrier), coverage goal (square footage and number of rooms or floors), and whether the booster can use your outside signal effectively. If band coverage does not align with your network, or if your outdoor reception is too weak, a different model will not solve the core limitation. When possible, prioritize boosters with clear band listings, realistic coverage guidance, and FCC/IC compliance so you know what you’re installing is designed for legitimate indoor use.
FAQ
Does a cell signal booster work if my outdoor signal is weak?
It can work better when you have at least some usable signal at the external antenna location, since the booster amplifies what it can capture. If there is no signal available to boost, it will not work.
What coverage area can I expect?
The advertised coverage is up to 7,000 sq ft, but real coverage varies based on your starting signal where the outdoor antenna is installed. The goal is to match antenna placement to the rooms you need most.
Will this boost 5G?
It supports 5G compatibility, but the practical limitation is that it targets 5G deployments that use existing 4G bands (via non-mmWave approaches). It is not intended for mmWave 5G enhancements.
Which bands does this booster support?
It supports bands 5, 12, 13, and 17. Compatibility depends on whether your carrier operates on those bands in your area.
Is it FCC approved?
It is described as FCC and IC certified and designed to comply with application standards.
How hard is the installation?
Setup is described as easy, with guidance to power off during antenna installation or adjustments. It typically involves placing the outdoor antenna and then positioning indoor antennas about 32 ft away from the outdoor antenna.
Specifications
| Product Title | Cell Phone Booster for Home & Multi-Room,Up to 7,000 sq ft,Cell Phone Signal Booster for Band 5/12/13/17,Boost 5G 4G Data for All U.S. Carriers FCC Approved Cell Signal Booster |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | YJXcell |
| Manufacturer | YJXcell |
| Special Features | 5G Compatibility, High Gain (70 dB), Easy Installation |
| Compatible Devices | Smartphone |
| Built-In Media | 1 |
| Unit Count | 1.0 Count |
| Warranty Description | 2year |
| Special Feature | 5G Compatibility, High Gain (70 dB), Easy Installation |
| Included Components | 1 |
Available variants
Size
- 7000 Sq.Ft
- 6000 Sq.Ft
- 7800 Sq.Ft
Recommended next
weBoost Home MultiRoom (model 470144) cell phone signal booster
The weBoost Home MultiRoom is a directional, FCC-approved booster designed to reduce dead zones and improve 4G LTE and 5G coverage across up to ~5,000 sq ft. It’s aimed at households with weak outdoor signal who want better call quality and faster data without relying on Wi‑Fi calling, and it works for multiple U.S. carriers, as long as your carrier’s bands are supported and the outdoor antenna can be pointed toward the tower.
SureCall Flare Cell Signal Booster for Working from Home up to 2500 sq ft, Boosts 5G/4G LTE, Omni Outdoor Antenna, Multi-User All Carrier, Verizon AT&T Sprint T-Mobile
The SureCall Flare is a compact, all-in-one style cell signal booster kit designed to improve voice and 4G LTE coverage in small homes or offices (up to 2,500 sq ft, depending on your outdoor signal). It uses an external omni outdoor antenna with an indoor unit that has the antenna integrated, aiming to make setup simpler, plus it supports multi-user use and 5G phone compatibility (boosting voice and LTE data on supported devices). The main buying caveat is that results depend heavily on your starting signal and correct installation spacing and placement.
weBoost Drive Reach Overland cell phone signal booster
The weBoost Drive Reach Overland is a rugged, off-road-focused booster designed to improve 5G/4G LTE coverage inside an overland vehicle when there’s at least some usable outside signal. It’s carrier-compatible across major U.S. networks and pairs a durable outdoor antenna with a versatile mounting setup, but it won’t create service where none exists, and results vary by carrier and signal conditions.
HiBoost Sidekick Cell Phone Booster for Home Office (5G & 4G LTE, FCC Approved)
The HiBoost Sidekick is a home-focused cell phone signal booster designed to improve 4G LTE and 5G coverage for up to about 2,000 sq ft, using a guided installation approach (color LCD display plus an app). It’s a solid fit for houses and basements where you have some existing signal to work with, but it is not meant for zero-signal areas.