Wireless Bridge Ubiquiti LOCO5AC PRE-CONFIGURED, Bundle of 2 Ubiquiti Nanostation LOCO 5AC
Quick take
This pre-configured bundle pairs two outdoor-ready Ubiquiti NanoStation LOCO 5AC units to create a point-to-point wireless bridge, commonly used to extend network access between buildings or outbuildings. Buyers like the strong signal performance and straightforward setup when the units are aligned correctly, but a minority report it is not truly “plug and play” out of the box and may require more hands-on configuration than expected.
Pros and cons
Pros
- Built for outdoor point-to-point networking, designed to work as a wireless alternative to a cable link.
- 5GHz, Wi‑Fi 5 (802.11ac) wireless bridge with up to 450 Mbps class throughput.
- Includes two units plus POE injectors, straps, and an installation guide, so you can start mounting right away.
- Multiple buyers mention stable performance for network extension and even IP camera use.
Cons
- Setup expectations can vary, with some buyers reporting they needed extra configuration and troubleshooting to get the pair to connect.
- “Long range” depends on line of sight, placement, and alignment, not just distance claims.
- Security features listed as WPS (as provided), so buyers who want specific modern security workflows may want to verify how it fits their setup.
What buyers think
Buyer feedback is split between “easy and effective” and “not plug and play.” Several reviews highlight that installation is fairly straightforward, signal strength is strong, and the link remains stable once mounted. In practical use, the bundle has been used to extend a network connection to a remote switch and support IP camera traffic across a short-to-moderate outdoor distance. At the same time, there is limited-but-real evidence that some setups require extra steps, such as using a computer connection to complete login/configuration and dealing with pairing issues when the units do not connect immediately. Overall, the pattern suggests these work well when placement and alignment are handled carefully, but buyers should be prepared for basic troubleshooting if the link does not form instantly.
How this wireless bridge bundle is meant to work
This kit is designed around point-to-point bridging, meaning it replaces a direct Ethernet cable between two locations with a dedicated 5GHz wireless link. One side connects into your local network (LAN side) and the other side feeds a remote network device (for example, a switch for cameras, a router for another building’s Wi‑Fi, or other network gear). Because it is a true bridge approach, it is often chosen for outbuildings where running cable is impractical.
Key features that matter for real-world bridging
5GHz bridge performance
The radios operate in the 5GHz band, using Wi‑Fi 5 (802.11ac). The bundle’s stated data rate is 450 Mbps class throughput, which is a helpful target when you are carrying video feeds or pushing a stable internet connection across a link.
Pairing for point-to-point links
The bundle is sold as a pre-configured 2-pack intended to operate as a linked pair. In practice, distance and reliability still depend on the environment, placement, and antenna alignment, especially for outdoor links where obstacles and tree coverage can reduce signal quality.
Outdoor-ready package and included hardware
You get two NanoStation LOCO 5AC units, two POE injectors with power cords, and mounting straps (plus an installation guide). That matters because many bridge installs fail on the “missing pieces” problem, like not having POE power available for the radios.
Pros and cons for specific buyer types
Best for
- Outbuilding networking: Extending your router or NVR network to garages, barns, pool houses, or similar locations.
- Security camera links: Situations where a remote camera or small camera network needs a reliable wired-like connection.
- Point-to-point bridges with line of sight: When both ends can be mounted so the radios can see each other with minimal obstruction.
- Buyers who want fewer configuration steps: If you are comfortable mounting hardware and following setup steps carefully, the pre-configured approach can reduce work.
Who should think twice
- People who truly need instant pairing without any setup: Some buyers report pairing did not work immediately and troubleshooting was required.
- Installers without any alignment ability: Even with strong hardware, outdoor bridges usually demand careful mounting and positioning.
- Buyers with very specific security requirements: Since the listing highlights WPS in the provided features, double-check that it fits how you manage network security.
Installation expectations (and where buyers get stuck)
Most buyers describe installation as manageable and the link as stable once the units are mounted. That said, the clearest caution is that “pre-configured” does not always translate to “it will connect immediately on first boot in every setup.” Common friction points for bridge kits generally include physical alignment, network port expectations on the LAN side, and completing device-side configuration if the pair does not establish the link right away. If you plan to install this between buildings, budget a little extra time for positioning and, if needed, logging into the radios to finalize settings.
Price and availability
This bundle is currently listed at about $208.95, with a higher list price shown ($247.39). Since pricing can change, check the live listing before you buy to confirm total cost for your required quantity.
Verdict
If you need an outdoor point-to-point network bridge between two locations and you want a 2-pack that includes the essential power hardware, the Wireless Bridge Ubiquiti LOCO5AC bundle is a strong fit. It tends to perform well for buyers extending network coverage and supporting camera feeds, with stable results after correct placement. The main caveat is setup reality: while many installs feel plug-and-play, some buyers report they had to do more than expected to get the link working, so be ready for basic troubleshooting.
FAQs
Is this a true plug-and-play wireless bridge?
Many buyers report easy installation and strong signal once mounted. However, some reviews indicate the units did not connect immediately out of the box and required additional steps (like using a computer to configure the devices). If you want zero troubleshooting, plan extra time for alignment and setup.
What is this bridge typically used for?
It is commonly used to extend a network connection between buildings or remote outbuildings, including setups where IP cameras need a reliable wired-like link to an NVR and switch.
Does the 450+ Mbps claim mean I will always get that speed?
The listing states up to 450 Mbps class throughput for the 5GHz link, but real-world speed depends on distance, line of sight, mounting height, and interference. Treat it as a performance target, not a guaranteed result at every installation.
Is it suitable for point-to-multipoint setups?
The product positioning emphasizes point-to-point use. Wireless bridges can sometimes be adapted for broader coverage, but your setup should match your intended topology (pairing for PTP is the core expectation).
What’s included in the bundle?
The bundle includes two pre-configured NanoStation LOCO 5AC units, two POE injectors with power cords, straps for mounting, and an installation guide.
Do I need to run Ethernet to both sides?
You typically connect your network (router or switch) on the sending side and your remote network device (switch or camera/NVR network equipment) on the receiving side. The bridge carries the link wirelessly between the two mounted units.
Specifications
| Product Title | Wireless Bridge Ubiquiti LOCO5AC PRE-CONFIGURED, Bundle of 2 Ubiquiti Nanostation LOCO 5AC, Point to Point Outdoor WiFi Bridge, Plugh and Play, 5GHz, 450+Mbps, 10+km Link Range, Network Bridge |
|---|---|
| Category | Electronics > Computers & Accessories > Networking Products > Wireless Access Points |
| Brand | GOOD STORY |
| Manufacturer | Good Story |
| Model Name | Ubiquiti Nanostation LOCO 5AC |
| Model Number | P2P-WIRELESS-Configuration |
| Operating System | airOS |
| Item Weight | 2 Pounds |
| Other Special Features of the Product | WPS |
| Frequency Band Class | Single-Band |
| Wireless Compability | 802.11ac |
| Compatible Devices | Security Camera |
| Antenna Location | Home |
| Connectivity Technology | Wireless |
| Antenna Type | Fixed |
| Security Protocol | WPS |
| Number of Ports | 2 |
| Control Method | Touch |
| Data Transfer Rate | 450 Megabits Per Second |
| LAN Port Bandwidth | 1000 Mbps |
| Maximum Upstream Data Transfer Rate | 450 Megabits Per Second |
| Number of Antennas | 4 |
| Smart Home Compatibility | Not Smart Home Compatible |
| Wi-Fi Generation | Wi-Fi 5 |
| Has Internet Connectivity | No |
| Router Network Type | Point-to-Point |
| Is Modem Compatible | No |
Recommended next
TP-Link EAP225 Omada AC1350 Gigabit Wireless Access Point Business WiFi
The TP-Link EAP225 is a dual-band, PoE-ready (802.3af/at plus passive options) Wi‑Fi 5 access point built for Omada SDN control, offering features like mesh support, seamless roaming, VLAN/guest options, and a centralized controller workflow. It can also be used more simply via its built-in web UI, but some advanced behaviors depend on using the right Omada SDN controller setup.
TP-Link 2.4GHz N300 Long Range Outdoor CPE for PtP and PtMP Transmission (CPE210)
The TP-Link CPE210 is an outdoor 2.4GHz long-range wireless bridge built for point-to-point or point-to-multi-point links. It pairs a 9dBi dual-polarized directional antenna with Pharos Control for centralized management, but real-world speeds depend heavily on distance, interference, and the fact that the device uses a 10/100 Ethernet uplink.
TP-Link WiFi Access Point TL-WA801N, 2.4Ghz 300Mbps, Supports Multi-SSID/Client/Bridge/Range Extender
The TP-Link TL-WA801N is a budget-friendly 2.4 GHz (802.11n) wireless access point for expanding or extending a home network using multiple modes like access point, client, bridge, and range extender. It’s a practical pick for turning an Ethernet connection into Wi‑Fi for devices like printers or smart-home gear, with the main setup tradeoff being that its passive PoE option needs the included injector rather than working directly with standard PoE switches.
WAVLINK AX1800 Outdoor WiFi 6 Extender, Long-Range Outdoor Access Point with Engineered Antennas, PoE, IP67 Weatherproof for Yard, Farm, RV & Garage
The WAVLINK AX1800 Outdoor WiFi 6 Extender is built for outdoor coverage in larger open areas, using WiFi 6 (AX1800), beamforming, MU-MIMO, and four 8dBi fiberglass antennas in a true IP67 enclosure. It supports multiple operating modes (AP, router, repeater, WISP) and can be powered via PoE for cleaner installs, but setup and network-mode selection can be tricky for some buyers.