weishan WH-1000XM3 Coiled Audio Cable Replacement for Sony WH-1000XM4, WH-1000XM2
Quick take
This coiled 3.5mm (1/8-inch) TRS replacement cable is designed for specific Sony WH-1000XM headphones, with a 6.35mm (1/4-inch) adapter for compatibility with more audio devices. Buyers generally report it works as intended, stretches reliably, and keeps a snug fit. The main caveat is that the included 1/4-inch adapter may not fit as smoothly in every setup, so it is worth confirming compatibility with your existing gear.
Pros and cons
Pros
- Coiled cable design with a listed range of about 4ft to 14ft (1.2m to 4.5m)
- Gold-plated tips intended to help maintain stereo signal quality
- Includes 3.5mm to 3.5mm TRS cable plus a 6.35mm (1/4-inch) adapter
- Stated compatible with multiple Sony WH and MDR headphone models that use the same style connection
Cons
- Compatibility is best when your headphones use the supported model list, and fit can be sensitive
- Review evidence is limited for “every device” compatibility, especially around the 1/4-inch adapter fit
What buyers think
Buyer-review evidence is limited but consistent in a few areas. Most feedback describes the cable as well made and effective as a replacement, with a snug plug fit and no noticeable audio issues when used with supported Sony headphones. Several buyers also mention the cord length being right for typical daily use, and the cable stretching without causing problems. One negative report points to a defective or poorly fitting 1/4-inch adapter, which means adapter usability may vary by setup.
Who this cable is for
This is a good match if you specifically need a replacement audio cable for compatible Sony WH and MDR-style headphones that use a 3.5mm (1/8-inch) TRS connection. It also makes sense if you want flexibility between device types, since the set includes a 1/4-inch (6.35mm) adapter for gear with a larger headphone jack.
Key features that matter day to day
Coiled length, designed for movement
The cable is built as a coiled extension style, intended to stay manageable at shorter distances while extending when you need more reach. The listed range (about 4ft to 14ft) is especially useful if your headphone spot is farther from your controller, PC, TV, or receiver.
Connector design for steadier plugging
The cable uses a protruded design meant to help the connection feel stable once inserted. Buyers who used it with WH-1000XM4 report that the plug fit is tight and stays reliable during regular listening.
Gold-plated tips and TRS signal support
Gold-plated tips are included, with support for stereo audio. The cable is specified as a 3.5mm (1/8-inch) 3-pole TRS connection (3 pins), and it is also paired with a 6.35mm (1/4-inch) adapter for larger-jack devices.
Build materials aimed at regular wear
The outer material is PVC, with an internal wire described as copper. The goal is durability for everyday stretching and resistance to abrasion and corrosion, which matters for coiled cables that flex more than straight replacements.
Pros and cons, in plain terms
Pros
- Good option for replacing a lost or damaged 3.5mm cable on supported Sony WH headphones
- Coiled length range makes it practical for gaming stations, PCs, and living room setups
- Gold-plated tips and TRS 3-pole design are intended to support stereo output
- One purchase covers both 3.5mm and 6.35mm connections via the included adapter
Cons
- Best results depend on correct headphone and jack compatibility, including how well the 1/4-inch adapter fits your specific gear
- There is limited review evidence overall, so it is harder to confirm adapter performance across all device models
Is it worth it?
If your WH-1000XM4 (or another supported Sony model) uses the same 3.5mm TRS replacement cable style, this weishan coiled extension cable is a straightforward way to restore wired audio with extra reach. It is particularly appealing if you want a single cable to cover both 3.5mm headphone outputs and 1/4-inch (6.35mm) jacks.
Price and availability
Check the latest price and stock status before buying, since replacement cables can vary by day and retailer listings. You can also compare against other replacement cables based on the connector type (3.5mm TRS) and whether you need the 6.35mm adapter.
How to choose the right cable before you buy
- Confirm the connector type: this cable is built for 3.5mm (1/8-inch) 3-pole TRS connections.
- Match your headphone model: use the supported Sony WH and MDR lists as your compatibility check.
- Check your device jack size: if your setup is 1/4-inch, you will be using the included 6.35mm adapter, so double-check fit.
- Think about your listening distance: the coiled 4ft-to-14ft range is aimed at reach without overly loose cable management.
FAQ
Does this cable work with Sony WH-1000XM4 and WH-1000XM2?
It is designed as a replacement for multiple listed Sony WH and MDR headphone models, including WH-1000XM4 and WH-1000XM2. Make sure your specific model matches the supported list and uses the same 3.5mm (1/8-inch) connection style.
What is the cable length range?
The cable is described as extending from about 1.2 meters (4 feet) up to about 4.5 meters (14 feet), depending on how it is stretched during use.
Does it include an adapter?
Yes. It includes a 6.35mm (1/4-inch) adapter in addition to the 3.5mm (1/8-inch) TRS cable.
Will it support stereo audio?
The cable uses a 3-pole TRS 3.5mm connection and features gold-plated tips, intended to support stereo output.
Are there any common complaints?
Buyer feedback generally reports good replacement performance, but there is limited overall evidence. One negative report mentioned a problem with adapter fit, so it is worth confirming that the 1/4-inch adapter works smoothly with your specific gear.
Specifications
| Product Title | weishan WH-1000XM3 Coiled Audio Cable Replacement for Sony WH-1000XM4, WH-1000XM2 Headsets, 1/8” Extension Cord with 1/4” Adapter Works on PS5 PS4 PC Smartphone Xbox One, 4ft to 14ft |
|---|---|
| Category | Electronics > Headphones, Earbuds & Accessories > Extension Cords |
| Brand | weishan |
| Manufacturer | weishan |
| Model Name | WH-1000XM3 |
| Connectivity Technology | Auxiliary |
| Item Weight | 0.08 Kilograms |
| Color | Black |
| Connector Type | Auxiliary |
| Cable Type | AUX |
| Compatible Devices | Digital Players, Headphone, Headphone Amplifiers, Headsets, Walkman |
| Other Special Features of the Product | 3.5mm, Coiled |
| Compatible Phone Models | Compatible with smartphones, specific models not listed |
| Connector Gender | Male-to-Male |
| Number of Pins | 3 |
| Maximum Voltage | 1 Volts (DC) |
| Compatible Amazon Tablet Models | Amazon Fire 7 5th Generation, Amazon Fire HD 10 5th Generation, Amazon Fire HD 6 4th Generation, Amazon Fire HD 8 5th Generation, Amazon Kindle Fire 2nd Generation, Amazon Kindle Fire HD 2nd Generation |
| Recommended Uses For Product | audio transmission for gaming, listening to music, watching movies, and other activities requiring audio output through headsets |
| Indoor Outdoor Usage | Indoor, Outdoor |
| Item Shape | Round |
| Brand Name | weishan |
| Customer Package Type | coiled in protective tubing |
| Model | WH-1000XM4 3.5mm Audio Cable |
| Part Number | WH-1000XM4 3.5mm Audio Cable |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Outer Material | Polyvinyl Chloride (PVC) |
Available variants
Size
- 3.5mm Male Plug with 6.35mm Adapter
Recommended next
Shure EAC64CL 64-Inch Detachable Earphone Cable for SE215, SE315, SE425 & SE535 (Clear)
The Shure EAC64CL is a 64-inch clear, detachable replacement earphone cable made for Shure SE215, SE315, SE425, and SE535 in-ear monitors. Buyers tend to like the flexible length and sturdy feel, especially as a less expensive way to restore fit and comfort than replacing an entire earphone. The main caveat is that sweat and moisture at the earbud connection can contribute to corrosion over time, so maintenance matters.
NewFantasia Replacement Audio Upgrade Cable Compatible with Sennheiser HD650, HD600, HD580, HD58X, HD660S, HD660S2, Massdrop HD6XX Headphones
A 2 meter braided replacement audio cable made for specific Sennheiser headphone models like the HD650 and HD600 series. It includes a 3.5mm male connector plus a 6.35mm (1/4 inch) adapter, with a tangle-resistant outer braid aimed at everyday desktop use. Best for buyers who need a replacement or a better length than the stock cable, with a tradeoff that the headphone-side connectors can feel snug.
UGREEN Headphone Extension Cable 3.5mm Extension Gold Plated Aux Cable
UGREEN’s 3.5mm male-to-female headphone extension cable adds reach between a phone, tablet, MP3 player, or aux output and your headphones, earbuds, or speaker system. It’s designed to stay easy to use with a tangle-free build and a slim, case-friendly connector shape, with dual shielding intended for clean stereo audio. The biggest buying caveat: it does not support a microphone on TRRS headphone setups.
Headphone Splitter, Syncwire Nylon-Braided 3.5mm Extension Cable Audio Stereo Y Splitter (Hi-Fi Sound) (No Mic)
A compact 3.5mm headphone splitter/extension cable that lets you run one audio source into two outputs (headphones and/or speakers). It’s built for everyday use with gold-plated connectors, double shielding for noise/interference protection, and a nylon-braided design intended to handle frequent bending.