weBoost Overland Antenna and Mounting Bracket – Model 311249
Quick take
The weBoost Overland Antenna and Mounting Bracket (Model 311249) is an exterior, omnidirectional cellular antenna kit built for off-road and outdoor durability, with an installation-focused mount for trucks, vans, and SUVs. It is designed to connect to compatible weBoost mobile boosters, and buyers frequently mention improved signal versus a stock antenna. The main buying caveat is that you still need a compatible weBoost booster, and some installations may require an adapter for the cable connection.
Pros and cons
Pros
- Targets multiple cellular bands, including 700, 800, 1700, 1900, and 2200 MHz.
- Rugged for vehicle and outdoor use, with MIL-STD 810H shock and vibration durability plus IP66 dust and water resistance.
- Ready-to-install kit pairing an outside antenna with an articulating mounting bracket and multiple mounting hardware options.
- Buyers report noticeable reception improvement compared with a stock antenna.
Cons
- Booster hardware is not included, so you must have a compatible weBoost mobile booster to complete the system.
- Some users note that an additional adapter may be needed for the wire connection during setup.
- The mount and its folding behavior depend on correct installation, so plan the mounting position carefully.
What buyers think
Buyer-review evidence is limited in volume, but the recurring themes are clear. Setup is commonly described as straightforward and the kit feels “easy to install” for vehicle use. Multiple reviews mention improved cellular reception after mounting the antenna, with some users comparing results directly against the stock antenna. There are also consistent installation-use themes: the mounting approach can be chosen to fit how people want to secure the antenna, and proper attention to cabling and mounting orientation can reduce setup friction. A small number of reviews mention needing an adapter for the connection, and at least one emphasizes confirming the mount folds the way intended after installation.
Who this antenna kit is for
This is a strong fit if you want a rugged, outdoor-rated cellular antenna setup for a vehicle, especially for overlanding or camping where you spend time in areas with weaker reception. Because the antenna is made to connect with compatible weBoost mobile boosters, it is best for people building or upgrading an existing weBoost booster system, rather than shoppers looking for a standalone booster.
Key features that affect real-world performance
Multi-band coverage for common LTE frequencies
The kit is designed for cellular bands at 700, 800, 1700, 1900, and 2200 MHz. If your carrier coverage in remote areas uses some of these bands, this antenna is positioned to help your booster capture and amplify the available signal.
Outdoor and vehicle durability
For off-road and road-trip buyers, durability matters as much as signal gains. The antenna and hardware are rated for shock and vibration durability (MIL-STD 810H) and have an IP66 rating for protection against dust and water. In plain terms, the kit is intended to stay viable through the kind of environmental exposure that comes with road debris, rain, and dusty trails.
Omnidirectional antenna design for vehicle mounting
The antenna is built as an omnidirectional cellular antenna, which is typically easier for vehicle use than highly directional designs because you are not constantly aiming it. That can be especially helpful when you are moving, parked at different angles, or traveling in areas where tower orientation changes.
Articulating mount designed for flexible installation
The included mounting bracket is articulating, and the hardware supports multiple mounting approaches (including T-slot, pole, and fixed mounting options). There is also a fold mechanism intended for storage when not in use, which is useful for people who want to keep the antenna lower during daily driving and raise it when they need the signal boost for backcountry use.
Pros and cons
Pros
- Built for rough use: MIL-STD 810H shock and vibration durability, plus IP66 dust and water resistance.
- Vehicle-friendly kit: An exterior antenna paired with an articulating mount and mounting hardware.
- Multi-band support: Covers 700, 800, 1700, 1900, and 2200 MHz.
- Real-world reception improvement reported: Multiple buyers describe better signal compared with the stock antenna after installation.
Cons
- Not the full booster system: The booster must be purchased separately, and you need a compatible weBoost mobile booster to complete the setup.
- Mounting details matter: You should confirm the mount folds as intended after installation, especially if you plan to store it for travel.
Installation and compatibility notes (so you avoid common pain points)
- Plan your mounting location: The articulating, folding mount is intended to be positioned so it can move as designed. If you mount it incorrectly, the fold behavior may not match your expectations.
- Check your connection path: Some setups may require an adapter for the wire connection. Before finalizing your route and cable slack, make sure you can connect cleanly between the antenna and your compatible booster.
- Use it with the right booster: This kit is made to connect with compatible weBoost mobile boosters, so confirm you already have the booster model that works with this antenna.
Is it worth it?
If your goal is a more durable, exterior cellular antenna for vehicle-based 4G LTE and 5G booster use, the weBoost Overland Antenna and Mounting Bracket (Model 311249) is a practical upgrade path. Buyers consistently report better reception versus stock antennas, and the IP66 plus MIL-STD 810H ratings are aligned with the kind of conditions overlanders and remote travelers face. It may not be the best choice if you want a standalone, one-box booster solution, or if you are not ready for compatibility checks and possible adapter needs for the cable connection.
Alternatives to consider
If you are choosing between different ways to improve vehicle cell reception, the decision usually comes down to durability, mounting flexibility, and how seamlessly the antenna integrates with your booster. In general, you might look for:
- A suction-cup or low-profile antenna approach if you want a non-permanent install and you are less concerned with hard off-road exposure.
- A different mounting system (pole, fixed, or clamp-based) if your vehicle setup does not match the included bracket options.
- A different antenna kit if your booster compatibility is limited or if your installer prefers a different connection style that reduces the chance of adapter needs.
Price and availability
Price can vary by retailer and timing, but it is listed as an in-stock item for US shoppers at the time of browsing. For the latest price and to confirm current availability, use the button below.
FAQ
Is the weBoost Overland Antenna and Mounting Bracket (Model 311249) a complete signal booster?No. The kit is an antenna and mounting solution, and the booster is sold separately. To complete the system, you need a compatible weBoost mobile booster.
What cellular bands does this antenna support?It is designed for 700, 800, 1700, 1900, and 2200 MHz cellular bands.
Is it safe for outdoor use on a vehicle?Yes. It has an IP66 rating for dust and water resistance, and it is also rated for shock and vibration durability (MIL-STD 810H).
Does it mount permanently or can it be folded away?The included articulating bracket supports multiple mounting styles and is designed to fold, so you can keep it lowered for daily driving and raise it when you need signal improvement.
Do I need extra adapters to connect the antenna?Some installs may require an adapter for the wire connection. If your current cabling or booster setup uses a different connector style, verify compatibility before final mounting.
Specifications
| Product Title | weBoost Overland Antenna and Mounting Bracket – Model 311249 - Signal Booster Antenna - 5G & 4G LTE Cell Phone Booster Antenna - FCC-Approved (Booster Sold Separately) |
|---|---|
| Category | Cell Phones & Accessories > Accessories > Signal Boosters |
| Brand | weBoost |
| Manufacturer | Wilson Electronics |
| Model Number | 311249 |
| Color | Black |
| AntennaDescription | Cellular |
| UPC | 810005964708 |
| Number of Items | 1 |
| Mfr Part Number | 311249 |
| Built-In Media | 13 in. Mast Ext., Side-Exit Adapter, Spring, Stabilizer Arm, Zip Tie & Thread Lock Pack, Outside Antenna, 30 ft. Cable & Heat Shrink Tube, Overland Mounting Bracket & Mounting Hardware |
| Warranty Description | 2 Year Manufacturer |
| Unit Count | 1.0 Count |
| Number of Channels | 5 |
| Antenna | Cellular |
| Number of Packs | 1 |
Recommended next
HiBoost Cell Phone Signal Booster for Home Office and Multi (Up to 8,000 Sq Ft, 2 Indoor Antennas)
The HiBoost home cell signal booster is built for large spaces, using two indoor antennas (one built-in) plus app-guided setup to improve weak 4G/5G coverage across multiple US carriers. It can be a strong choice for basements, offices, cabins, and metal buildings, with the main tradeoff being that it works best when you can provide an acceptable outside signal and take time aligning the antennas.
weBoost Drive Reach Overland cell phone signal booster
The weBoost Drive Reach Overland is a rugged, off-road-focused booster designed to improve 5G/4G LTE coverage inside an overland vehicle when there’s at least some usable outside signal. It’s carrier-compatible across major U.S. networks and pairs a durable outdoor antenna with a versatile mounting setup, but it won’t create service where none exists, and results vary by carrier and signal conditions.
weBoost Home MultiRoom (model 470144) cell phone signal booster
The weBoost Home MultiRoom is a directional, FCC-approved booster designed to reduce dead zones and improve 4G LTE and 5G coverage across up to ~5,000 sq ft. It’s aimed at households with weak outdoor signal who want better call quality and faster data without relying on Wi‑Fi calling, and it works for multiple U.S. carriers, as long as your carrier’s bands are supported and the outdoor antenna can be pointed toward the tower.
weBoost Home Complete (Model 470145) signal booster for 5G and 4G LTE
weBoost Home Complete is a powerful, FCC-approved home cell signal booster kit designed to improve coverage across up to 7,500 square feet for compatible U.S. carriers. It’s a strong DIY option for whole-home weak-signal problems, but real-world results depend heavily on mounting, antenna direction, and whether you’re boosting the right carrier bands for your area.