Vrriis Wireless HDMI Transmitter and Receiver (1080P Full HD, up to 1300ft, 0.05s latency)
Quick take
This wireless HDMI transmitter and receiver kit sends Full HD (1080p) video wirelessly from a source device to a TV or projector, with stated 0.05s latency and HDCP 1.4 support. It is a good fit for setups where running an HDMI cable is difficult, such as multi-room monitoring or temporary viewing, but range can drop significantly through walls, metal, brick, or glass.
Pros and cons
Pros
- 1080p@60Hz support with low stated latency (0.05s)
- IR remote control support plus an included IR cable for controlling the HDMI source from the TV location
- Dual HDMI outputs and a transmitter loop out for local monitoring
- Multiple power options, including NP-F battery support, USB-C, and adapters
Cons
- Long-range is best in open field conditions, obstacles can shorten coverage or cause signal loss
- Adding more receivers reduces transmission distance (up to 1TX to 5RX, but range varies)
- Range and stability at your exact distance depend heavily on room layout and interference
What buyers think
Buyer feedback is generally positive around easy pairing, fast setup, and a stable, watchable picture for everyday viewing. Multiple reviewers mention that the unit connects quickly and works well for moving a live HDMI feed to another room or display without relying on an app-based camera stream. The most repeated theme is reliable transmission for real-time monitoring, with limited but relevant mentions of latency expectations (and one note that a delay can be noticeable, which may align with the nature of wireless video links).
What this kit is for
This is a wireless HDMI video link meant to replace a hard HDMI run when you need flexibility. Typical uses include sending a DSLR or camera HDMI output to a monitor or TV, displaying a laptop or set-top box feed on a projector, and routing a DVR or other HDMI source to a second room.
Key features that matter for real setups
1080p video, 60Hz, and low latency
The system supports Full HD up to 1080p@60Hz. It is also rated for a 0.05s delay, which can be a meaningful spec for live viewing use cases like sports, game sessions, or real-time monitoring (wireless links still depend on signal conditions, but this is designed for low-latency use).
IR remote extension for controlling the source
One standout feature is IR support. With the included IR cable, you can place the IR sensor where the TV or receiver is located, then control the HDMI source device as if you were in the same room. That is especially helpful for set-top boxes or media devices that otherwise require line-of-sight to their remote sensor.
Dual HDMI outputs and local loop out
The transmitter side includes a loop out, and the receiver side includes dual HDMI outputs. In practice, that means you can add a local monitor while still sending the main feed to a TV, or connect two displays to the receiver for more convenient monitoring.
Range expectations, and why walls matter
The headline range is up to 1300ft in an open field, using a dual-antenna design (2.4G/5G high-speed transmission). Indoors, actual distance is likely shorter, because obstacles like walls, metal, brick, or glass can reduce coverage or cause signal loss. Plan your layout assuming you will need line-of-sight or at least minimal obstruction for the best results.
Power options for cameras, monitors, and mixed installs
Power flexibility is a major selling point here. The kit can be powered using USB-C (with adapters as needed), and it can also run on NP-F series batteries (F970, F750, F550). There is also support described for portable rechargeable power sources. Note that batteries are not included, so you will want to match the battery type you plan to use.
Can it handle multiple receivers?
The system supports switching between up to 5 receivers (1TX to 5RX). However, as you add receivers, the transmission distance decreases. If you need multi-display distribution, consider starting with the fewest receivers you truly need and test your setup at the intended distances.
Pros and cons compared to common buyer priorities
- Best for: buyers who want to send a live HDMI feed wirelessly at up to 1080p@60Hz, need IR remote control, and care about monitoring flexibility with loop out or dual outputs.
- Best for: multi-room viewing and installs where running a cable is awkward (for example, moving a camera or DVR HDMI output to another room).
- Use caution if: your route requires passing through multiple walls or dense building materials. Range through obstacles is a known limiting factor for wireless HDMI.
- Use caution if: you plan to use many receivers at long distance, since distance is expected to drop as the system scales.
Setup tips to reduce frustration
Because wireless HDMI performance is sensitive to environment, keep the transmitter and receiver antennas oriented for best coverage, minimize metal obstruction between rooms when possible, and verify that both ends are powered reliably (especially if you are using camera batteries or portable power banks). If your source device requires a remote sensor, position the IR cable carefully for dependable IR control.
Price and availability
Pricing varies by seller and promotions. Check the current price before buying.
Verdict
The Vrriis wireless HDMI transmitter and receiver kit is a practical option for buyers who need a clean wireless alternative to HDMI cables while retaining features that make real-world viewing easier, IR remote extension, local loop out, and dual HDMI outputs. It is most compelling when your rooms allow reasonable wireless coverage, since walls and other obstacles can cut range. If you can plan your layout for strong signal conditions, this can be a straightforward way to get a stable, low-latency 1080p HDMI feed to a TV or projector.
FAQ
Is this wireless HDMI transmitter limited to 1080p?Yes, this kit is designed for Full HD, with support listed up to 1080p@60Hz.
What is the effective range indoors?The long-range claim is up to 1300ft in an open field. Indoors, walls, metal, brick, or glass can shorten coverage or cause signal loss, so indoor range will typically be less than the open-field number.
Does it support controlling the HDMI source with a remote?Yes. It includes IR remote control support, and the kit uses an IR cable to help you control the HDMI source from the receiver location.
Can I connect two displays?The receiver side supports dual HDMI output, and the transmitter side also includes a loop out for local monitoring. This setup is intended to make monitoring more convenient across displays.
Will adding more receivers reduce distance?Yes. It supports up to 1TX to 5RX, but transmission distance decreases as the number of receivers increases.
What power options does it use?It supports multiple power sources, including NP-F series batteries (F970, F750, F550), USB-C power (with adapters as needed), and other described 5V2A options. Batteries are not included.
Specifications
| Product Title | Wireless HDMI Transmitter and Receiver,1080P Full HD Wireless Video Transmission System with Loop Out,1300FT Los Range,0.05s Delay,for Streaming from DSLR,Laptop,Setop Box to TV/Projector IR Support |
|---|---|
| Category | Electronics > Television & Video > AV Receivers & Amplifiers |
| Brand | Vrriis |
| Manufacturer | VRRIIS |
| Model Number | WL082 Parent |
| Color | BLACK |
| Item Weight | 1.85 Pounds |
| Connectivity Technology | HDMI |
| Controller Type | IR REMOTE CONTROL |
| Other Special Features of the Product | Dual HDMI OUT, Infrared Expansion, Multiple Power Supplies, Multiroom |
| Compatible Devices | CAMERA, Projector, Television |
| Total Number of HDMI Ports | 4 |
| Connector Type | HDMI |
| Audio Output Mode | Stereo |
| Surround Sound Channel Configuration | 2.0 |
| Video Encoding | AVI/MPEG/DivX/MOV/ASF/WMV/RMVB/QuickTime |
| Number of Channels | 2 |
| Supported Internet Services | Netflix, YouTube |
| Control Method | Remote |
| Audio Output Type | Speakers |
| Smart Home Compatibility | Not Smart Home Compatible |
| Wireless Technology | WIRELESS |
| Mfr Part Number | 007 |
| Warranty Description | 1 YEAR |
| Built-In Media | Transmitter*1,Receiver*1,USB C Cable*2,Adapter*2,User Manual |
| Item Dimensions D x W x H | 10"D x 6"W x 3"H |
| Special Feature | Dual HDMI OUT, Infrared Expansion, Multiple Power Supplies, Multiroom |
Available variants
Size
- Wireless HDMI Transmitter and Receiver Kit
- Wireless HDMI Receiver Only
Recommended next
Denon AVR-X3900H 9.4 Channel AV Receiver, 105W Power, Dolby Atmos, DTS:X, AURO-3D & IMAX Enhanced
The Denon AVR-X3900H is a feature-rich 9.4-channel AV receiver built for immersive Dolby Atmos-style home theater, plus HEOS whole-home streaming and modern HDMI video support (4K/120Hz and 8K/60Hz, including Dolby Vision). It’s a strong fit for buyers who want room correction and an expandable surround setup, just be aware that some buyers report UI friction and limitations around Bluetooth source vs. Bluetooth transmitter use.
Rockville Home Matrix 4 600W Multi Room Receiver/Amplifier, 8-Channel (4 Zones), Bluetooth, USB, Optical, Coaxial, RCA, Mic Inputs
The Rockville Home Matrix 4 is a compact, rack-mountable 8-channel (4-zone) multi-room amplifier built for whole-home audio with independent zone control. It supports multiple input sources (Bluetooth, USB, optical, coaxial, RCA, FM) and includes mic controls with a priority feature for paging or karaoke-style use. The biggest practical caveat from buyer feedback is short Bluetooth range and a basic remote.
Elalight Wireless HDMI Transmitter and Receiver 328FT/100M (2.4G+5G) Plug & Play Kit
The Elalight Wireless HDMI transmitter and receiver kit is built for simple cord-free screen sharing between a laptop and a TV, projector, or monitor. It supports 4K decoding with 1080P/60Hz output, offers mirroring and extension modes, and is designed for long-range use with a 2.4G/5G dual-band wireless connection. The main caveat is buyer-fit: it is not recommended for gaming, and a small set of users report reliability issues over time.
Pyle 4 Channel Bluetooth Home Amplifier (PD3000BA)
The Pyle PD3000BA is a 4-channel Bluetooth home amplifier with a front-loading CD/DVD player, FM radio presets, and multiple audio/video inputs. It can be a practical all-in-one choice for casual home theater or light karaoke setups, with a key caveat: real-world reliability and certain feature outputs (like sub-out functionality) have mixed review evidence, so it is worth checking your wiring and expectations before committing.