VEVOR Rubber Speed Bump (2 Pack) - 6 FT Heavy Duty 22,000 lbs Capacity
Quick take
The VEVOR rubber speed bump is a long, heavy-duty traffic hump that also doubles as a 2-channel floor cord cover for keeping power lines, hoses, or extension cords protected when vehicles pass nearby. Buyers tend to like the solid rubber feel and the way it slows drivers, but you should expect a sizable, permanent-style install effort, especially depending on your surface type.
Pros and cons
Pros
- Rubber construction rated for up to 22,000 lbs of load for driving over the hump.
- Two bottom channels provide space for cables, plus raised-dot and non-skid texture for traction.
- Black-and-yellow, reflective high-visibility strip is intended to improve nighttime awareness.
- Modular design, with enough length to connect multiple units for longer cable runs.
Cons
- It is large and heavy, so repositioning and one-off setups may be inconvenient.
- Installation depends on drilling and anchors, and the included drill bit may not be ideal for all surfaces.
- Its cable-channel height and width are limited, so thick cords or multiple large items may not fit as planned.
What buyers think
Buyer-review evidence points to a consistent theme: these bumps are perceived as tough, heavy, and effective for slowing vehicle traffic in driveways and similar areas. Users also mention that the provided hardware can work when drilled correctly into concrete, and that the unit feels solid enough for repeated use in demanding settings. Some buyers used the bumps for non-standard cable and gate-related needs (like creating clearance under a gate area), but overall feedback centers on performance for traffic calming, build quality, and practical installation when the surface is prepared.
What this speed bump is for
This product combines two jobs in one: a traffic-calming hump and a protected pathway for cables. The 2-channel design is meant to keep cords, lines, and similar items from being crushed or exposed when cars, trucks, or other vehicles roll over the area.
Key specs that affect buying decisions
Size and channel layout
- Overall footprint: 72.8 in long x 12.2 in wide x 2.2 in high (per unit).
- Two channels on the bottom for cable protection or drainage.
- Single channel size: 1.2 in wide x 1.6 in high.
Load capacity
It is rated to handle up to 22,000 lbs of load. If you regularly deal with heavier vehicles, that capacity is one reason shoppers consider this type of rubber hump over lighter-duty ramps.
Traction and visibility features
Drivers are intended to notice it sooner, thanks to black-and-yellow coloring with reflective coating. On top, the design includes a non-skid texture and raised dots to help vehicles pass more securely.
Installation and setup: what to expect
The package includes mounting bolts/screws and a drill bit, with instructions geared toward fastening to gravel, asphalt, or concrete. Because the unit is meant to stay put, setup typically involves drilling and anchoring to your surface, which can be more work than simply placing a non-fixed ramp.
If your goal is a temporary layout, the modular length and multi-unit concept can help you cover longer cable runs. If you want a long-term installation, take time to plan the alignment so your cables fall cleanly into the channel space.
Pros and cons for different use cases
Best for
- Driveways, parking lots, and venue areas where you want to slow vehicles and protect cables at the same time.
- Situations with repeated vehicle traffic over cable runs, such as event spaces, warehouses, or community sites.
- Buyers who prefer a heavier rubber option over plastic or lighter ramps.
Considerations before you buy
- If you need something quick to move day to day, the size and weight may be a drawback.
- If your surface is asphalt or gravel, you may need to be extra thoughtful about anchoring method and hardware compatibility.
- Measure your cables and plan spacing, because the channel opening is limited (1.2 in x 1.6 in per channel).
Is the VEVOR rubber speed bump (2 pack) worth it?
It is worth considering if you are shopping for a combined traffic-calming hump and floor cord cover, and you want a robust rubber build with a high stated load capacity. It is most compelling for driveways and industrial or public-facing areas where durability and driver visibility matter. If you only need a lightweight temporary cord cover, you may find this type of traffic hump overkill in both weight and footprint.
FAQ
How many speed bumps come in the pack?
This is sold as a 2 pack, with two rubber speed bump units.
What is the load capacity of the VEVOR speed bump?
It is rated for up to 22,000 lbs of load.
Is this designed to protect cables or cords?
Yes. Each unit has two channels intended for cable protection (raised dots and non-skid texture are also included for vehicle traction).
What are the channel dimensions?
Single channel size is 1.2 in wide x 1.6 in high.
Is it meant for indoor and outdoor use?
It is intended for both indoor and outdoor applications, including driveways, parking lots, and event or venue settings.
Does it work on asphalt, concrete, and gravel?
The design is intended for installation on gravel, asphalt, and concrete using the included mounting hardware.
Can you connect multiple units together?
Yes, the modular design is intended to allow connecting units to cover longer cable runs.
Summary verdict
If you need a durable rubber solution to slow vehicles while keeping cables protected, the VEVOR rubber speed bump (2 pack) is a strong fit, especially for long, high-traffic areas. Just make sure your cables fit the channel openings and plan for a more permanent, anchored installation due to the unit’s size and weight.
Specifications
| Product Title | VEVOR Rubber Speed Bump (2 Pack) - 6 FT Heavy Duty 22,000 lbs Capacity for Road & Driveway, 72.8" x 12.2" x 2.2" Modular Traffic Hump, 2 Channel Floor Cord Cover for Asphalt, Concrete, Gravel |
|---|---|
| Category | Electronics > Accessories & Supplies > Cord Management > Floor Cord Covers |
| Brand | VEVOR |
| Manufacturer | VEVOR |
| Model Number | VV-GXB-JSD 72YC 2PCS |
| Color | Black + Yellow |
| Material | Rubber |
| Item Weight | 110 Pounds |
| Product Dimensions | 72.8"L x 12.2"W x 2.2"H |
| Brand Name | VEVOR |
| UPC | 197988494911 840281515509 |
| Manufacturer Warranty Description | None. |
| Manufacturer Part Number | Rubber Speed Bump 2Pack 2Channel 72.8"L |
| Included Components | 1 x Drill Bit, 12 x Screws, 2 x Rubber Speed Bump |
| Global Trade Identification Number | 00197988494911 |
| Item Type Name | 72.8 x 12.2 x 2.2 inch Garage for Asphalt Concrete Gravel Driveway-6 FT |
| Unit Count | 1.0 Count |
| Item Dimensions L x W x H | 72.8"L x 12.2"W x 2.2"H |
| Load Capacity | 22000 Pounds |
| Is Foldable | No |
| Material Type | Rubber |
Available variants
Style
- 2 Pack
- 6ft
- 1 Pack + Cap
Recommended next
Cordinate 6ft Floor Cord Cover, Cable Protector, Hide Extension Cords, Protect Cords, Prevent Cable Trips, Heavy Duty Cord Hider - Cable Cavity = 0.75" (W) x 0.43" (H) - Tan
The Cordinate 6ft floor cord cover is a low-profile PVC channel designed to route HDMI, power, and other cables safely across open floors without creating a trip hazard. It uses a split-channel design for easier cutting and includes double-sided tape for installation, but some buyers report the ends and tape may not hold as well in certain conditions (especially until the cover lays fully flat).
Cable Management Box - Wooden Style Large Cord Organizer to Hide Wires & Power Strips
A large, freestanding cord organizer box designed to hide power strips, surge protectors, and tangled desk or TV-station wiring. Buyers like the tidy, “hidden cords” look and the wood-and-frost-black style, with the main caution being lid fit that may not feel perfectly snug to everyone.
VEVOR 3 PCs Drop Over Cable Cover Ramp, 2,000 lbs/axle
The VEVOR 3-pack drop-over cable cover ramps are designed to protect cords and hoses in high-walking (and some wheeled) areas. Buyers like that the sections lay flat, interlock for longer runs, and provide a wide channel with no messy tape required for setup. The main caveat is fit: they are best for foot traffic and light wheel movement, not for heavy vehicles.
VEVOR 3.28 ft Cable Protector Ramp, 4 Pack of 1 Channel
The VEVOR 3.28 ft cable protector ramp kit uses industrial rubber and a 1-channel groove to help keep cords, hoses, and floor cables from getting stepped on or driven over. It’s built for indoor and outdoor use, designed to connect multiple ramps for longer runs, and aimed at garages, driveways, and garden paths where vehicles and people share space.