Veracity USA Base Unit with POE OR VPSU-57V and EXTEN VLS-1P-B
Quick take
The Veracity VLS-1P-B is a small, metal PoE-compliant base unit that takes PoE input (or works with a VPSU-57V) and provides “extended PoE out” via an RJ-45 connection. It is best for installers and buyers who already have a compatible Veracity setup and need a reliable power base with 57V DC, up to 3.6W output. The main caveat is fit, you need to confirm your existing system’s compatibility and power needs before relying on it for anything beyond its rated output.
Pros and cons
Pros
- Metal enclosure design (durability-oriented material choice).
- PoE compliant support (IEEE 802.3af or IEEE 802.3at).
- Clear power ratings for output: 57V DC at 0.72A (3.6W).
- Uses an RJ-45 connector, aligning with standard network cabling workflows.
Cons
- Power output is limited to 3.6W, so it is not a fit for higher-power devices.
- “Extended PoE out” is for specific compatible setups, compatibility matters.
What buyers think
Buyer-review evidence is limited, with only a small number of ratings available. With so little review detail, it is not possible to draw a reliable pattern about performance, reliability over time, or day-to-day usability beyond the core spec-based expectations of a PoE base unit.
What this base unit is, and how it fits into a security install
Veracity’s VLS-1P-B is a power base/accessory intended for PoE-based security installations. It is designed to accept a network-style input using RJ-45 and provide a 57V DC output using extended PoE out. In practical terms, it is the type of component you choose when you need to manage how power is delivered through your existing network cabling architecture, rather than using a standalone, device-specific power brick.
Key specs that matter for buying
PoE compatibility
The unit is PoE compliant with IEEE 802.3af or IEEE 802.3at. That helps when you want to power compatible equipment using standard PoE sources and cabling.
Voltage and output power limits
Input and output are specified as 57 volts DC. Output current is rated at 0.72 amps, with output wattage listed as 3.6 watts. That is a critical constraint, if your downstream device requires more power than 3.6W, this base unit may not be the right component.
Connector and cable expectations
It uses RJ-45 connectors, which typically aligns with Ethernet cabling practices used in PoE security runs. If your installation plan depends on RJ-45 cabling and PoE-style power delivery, this matches that approach.
Build and form factor
The enclosure is specified as metal, and the product is categorized with an external form factor. The listed item weight is 0.18 pounds, and the dimensions are compact, suggesting it is meant to be integrated into an installation rather than used as a bulky standalone power supply.
Who should buy it
- Installers and system builders who already use compatible Veracity PoE infrastructure and need a specific base unit to extend PoE out.
- Buyers maintaining an existing setup and looking for a replacement or add-on component that matches the same 57V DC and PoE-compliant behavior.
- Projects where 3.6W is sufficient for the powered end equipment you are supporting.
Who should avoid it
- Buyers powering higher-draw devices, because the specified output is 57V at 0.72A (3.6W).
- Shoppers without system compatibility context, if you are not sure your camera or powered accessory expects this specific base behavior (PoE in with extended PoE out), double-check before buying.
Pros and cons in plain English
Best fit: When you need a PoE-compliant power base with 57V DC output delivered through RJ-45 cabling workflows, and your downstream requirements stay within 3.6W.
Main tradeoff: It is specialized. If your priority is broad compatibility with many device types or higher wattage power, you will likely need a different class of PoE power accessory or a purpose-built power solution.
Alternatives to consider (by feature, not by name)
- Higher-watt PoE power solutions: If your powered equipment needs more than 3.6W, prioritize alternatives with higher output current and wattage ratings.
- Different power-delivery models: If your installation is not designed around RJ-45 PoE-based power extension, consider power delivery approaches that match your cabling and device input requirements.
- PoE switch or injector-based approaches: For projects where you want to centralize power from a PoE source, compare whether your setup can use a PoE switch port or injector instead of a base unit.
Price and availability
Pricing and availability can vary, so check the current listing for the most up-to-date details before you buy. If you are matching an existing installation component, confirm the exact model number (VLS-1P-B) and ensure it matches your system’s power expectations.
FAQ
Is the Veracity VLS-1P-B compatible with IEEE 802.3af and 802.3at?Yes. It is specified as PoE compliant with IEEE 802.3af or IEEE 802.3at.
What power output does it provide?The output is specified as 57V DC, with 0.72A output current and 3.6W output wattage.
Does it use RJ-45 connections?Yes. The unit uses RJ-45 for the cable/connector interface.
Will it work for any camera or PoE device?It is intended for compatible security installation setups and depends on whether your powered end equipment’s requirements fit within the unit’s output rating.
How do I decide if it is the right part for my installation?Start by confirming your needed output voltage and wattage, verify that your PoE source and cabling approach are aligned, and check that your downstream equipment is compatible with “extended PoE out” behavior.
Conclusion
The Veracity VLS-1P-B is a compact, metal, PoE-compliant base unit built for buyers who are working inside a compatible PoE security installation design. It offers a clear 57V DC output and a tight 3.6W power envelope, which makes it well-suited for systems that fit those requirements, but less suitable if you need higher power or broad, device-agnostic compatibility.
Specifications
| Product Title | Veracity USA Base Unit with POE OR VPSU-57V and EXTEN VLS-1P-B |
|---|---|
| Category | Electronics > Camera & Photo > Video Surveillance > Installation Services |
| Brand | Veracity |
| Manufacturer | VERACITY |
| Model Number | VLS-1P-B |
| Color | Blue |
| Material | Metal |
| Item Weight | 0.18 Pounds |
| Connector Type Used on Cable | RJ-45 |
| Input Voltage | 57 Volts (DC) |
| Amperage | 0.72 Amps |
| Form Factor | External |
| Output Current | 0.72 Amps |
| Output Voltage | 57 Volts |
| Output Wattage | 3.6 Watts |
| Item Dimensions | 1.38 x 3.66 x 0.83 inches |
| Enclosure Material | Metal |
| UPC | 053926372072 892314002241 |
| Global Trade Identification Number | 00892314002241 |
| Mfr Part Number | VLS-1P-B |
| Unit Count | 1.0 Count |
| Specification Met | PoE compliant (IEEE 802.3af or IEEE 802.3at) |
| Connector Type | RJ-45 |
Recommended next
Triplett 8075 CamView IP Pro-X CCTV Camera Tester with PoE
The Triplett 8075 CamView IP Pro-X is a field-focused CCTV installation tester that combines IP camera network checks, SD/analog HD/HD over coax testing, and PoE power in one handheld unit with a 7-inch touchscreen. It is a strong all-in-one option for installers who need quick connectivity, audio/video signal checks, and common cable/PTZ controls, with the main tradeoffs being limited Wi‑Fi support details, occasional interface hangs, and buyer-fit questions around certain camera brands or firmware update expectations.
Ideal Industries R171000 SecuriTEST IP Digital/Analog/HD Coax CCTV Tester
The Ideal Industries R171000 SecuriTEST IP is a field installer and troubleshooting tester for IP, digital/HD coax, and analog CCTV setups. It powers cameras (including PoE/PoE+ up to 24W) without external injectors, supports quick camera login/config, and helps generate test documentation, but network compatibility with newer camera models can be a concern.
AngelBox detects and Connects All Your Security Cameras (99% Compatible)
AngelBox is a plug-and-play IP camera connector designed to detect cameras on your local network and stream them through Angelcam with an encrypted connection. It can simplify setup (especially compared to port forwarding and public IP work), but it works best when all cameras are on the same network and camera onboarding may be slower or more finicky if you’re trying to add many cameras at once.
Triplett 8073 CamView IP Pro-D CCTV Camera Tester with Built-in DHCP Server
The Triplett CamView IP Pro-D (8073) is an all-in-one CCTV installation and troubleshooting tester for ONVIF IP cameras plus common analog HD standards (AHD 2.0, HD-TVI 3.0, HD-CVI 3.0). Its built-in DHCP server, IP/network test tools, and 1080P display are geared toward faster onsite setup, verification, and reporting.