VAUBORTTI Aluminum Fish Finder Mount, Marine Electronic Mount for Boat, C Size 1.5" Ball with T-Bolt Track Base
Quick take
This aluminum fish finder mount is designed for boats and watercraft with rail track systems, pairing a 1.5-inch (C-size) TPU ball with a T-bolt track base and an oversized wing-style knob for quick aiming. It is a solid fit if you want a sturdier, corrosion-resistant alternative within the C-size ball ecosystem, but you will want to confirm your device’s hole pattern and that your specific rail setup matches the intended T-bolt track mounting style.
Pros and cons
Pros
- One-piece die-cast aluminum build with a powder-coated finish for corrosion resistance in marine environments.
- 1.5-inch TPU ball built for secure positioning and stability, including anti-slip behavior in rougher water.
- Oversized wing-style adjustment knob is easier to tighten or loosen when hands are wet or gloved.
- Wide compatibility via AMPS-style mounting patterns for many fish finders, GPS/chartplotters, and radios.
Cons
- Best choice if you specifically need a rail-track (T-bolt) mount and a C-size 1.5-inch ball system, otherwise you may need different hardware.
- Compatibility can depend on the exact model and bracket pattern, so double-check device fitment before buying.
What buyers think
Buyer review evidence points to a consistent theme: the mount is perceived as sturdy and well-built for real-world boat use, especially when installed on common rail track systems. Shoppers specifically mention it working well with Garmin units and using it as a second mount for additional locations on the boat, which suggests it is practical for multi-device setups. Several reviews also call out the mount’s adjustability and overall quality feel, with at least one review describing it as comparable in sturdiness to a well-known RAM-style approach.
Who this mount is for
The VAUBORTTI mount is a strong option if you:
- Have a boat with a T-rail or similar track system and want a fish finder or chartplotter positioned within easy reach.
- Use (or plan to use) devices that fit common C-size (1.5-inch) ball ecosystems and compatible mounting plate patterns.
- Value quick adjustment with an oversized, glove-friendly knob for changing the angle on the water.
- Want a mount built around marine-minded materials, including die-cast aluminum and a powder-coated exterior.
Fit and compatibility: what to verify first
This mount targets the C-size 1.5-inch ball system and uses a rectangular mounting plate with pre-drilled hole patterns that support AMPS-style installations. It is designed to be compatible with a range of marine electronics brands, including specific Garmin and Lowrance models listed for compatibility. Before ordering, verify:
- Rail fit: that your boat’s rail track matches the intended T-bolt track base mounting approach.
- Device mounting pattern: that your fish finder or chartplotter matches the supported hole patterns for direct installation.
- Ball size: that your existing arm system (if you are mixing components) is compatible with the 1.5-inch C-size standard.
Build quality and materials
The mount centers on a one-piece aluminum alloy construction with electrostatic powder coating, intended to resist corrosion during regular saltwater exposure. The positioning system uses a molded TPU ball, which is designed to resist deformation under load and provide anti-slip stability. In practical terms, this combination is aimed at keeping your electronics aimed consistently, even when the boat motion is less than smooth.
Adjustability and day-to-day use
The wing-style adjustment knob is enlarged for comfort and control, which can matter when you are making small aiming changes during fishing or while wearing gloves. The mount’s wide compatibility and adjustable reach can also be helpful for bow, console, or other locations where you want the screen visible while still keeping the device secure.
Pros and cons (expanded)
Pros
- Marine-oriented construction: one-piece die-cast aluminum plus powder coating.
- Stable positioning: 1.5-inch TPU ball designed for anti-slip and durability.
- Glove-friendly adjustment: oversized wingnut style knob for easier tightening and loosening.
- Multiple-use mounting: rectangular plate designed for varied electronics and AMPS-style setups.
Cons
- Hardware ecosystem dependent: it is specifically made around a rail-track base and a C-size (1.5-inch) ball system.
- Model-specific fitment matters: some devices are compatible while others may not, so confirm the exact mounting requirements for your unit.
Price and availability
Price varies by retailer and date, but this mount is positioned as a value-minded alternative in the marine electronics accessory space. For the most accurate cost and to confirm current availability, check the listing before you buy.
Comparison: what to consider vs. other mount options
If you are comparing accessories in the marine GPS category, focus on these decision points rather than the brand name:
- Mounting method: If you have a rail track system, a T-bolt style base can be more convenient than permanent hard-mounting on flat surfaces.
- Ball size and compatibility: Make sure your arm and ball standard match (this one is C-size 1.5-inch).
- Durability priorities: Powder-coated aluminum and a stable ball material are key for long-term use, especially in coastal or salt environments.
- Adjustment ergonomics: If you often adjust angles quickly, an oversized knob can reduce friction and improve confidence.
Verdict
The VAUBORTTI Aluminum Fish Finder Mount is a practical rail-track compatible choice for anglers who want a sturdy, marine-grade build and confident aiming with a 1.5-inch TPU ball. It looks best for shoppers using C-size ball ecosystems who need dependable mounting for Garmin or Lowrance units with compatible plate patterns. If you do not have a matching rail track setup or your device mount pattern does not line up, you may be better served by a different mounting style.
FAQ
How do I know if my fish finder is compatible with this mount?Confirm that your device supports the AMPS-style hole pattern on the rectangular mounting plate and that it is intended for the 1.5-inch (C-size) ball system used by this mount.
Will this work with a T-rail on my boat?It is designed around a T-bolt track base, so it should fit common rail track systems. Double-check that your boat’s rail configuration matches the track mounting style.
What kind of durability does the mount use for marine use?The mount uses one-piece die-cast aluminum with an electrostatic powder-coated finish, plus a TPU ball intended to resist deformation and improve stability.
Is the adjustment knob easy to use in wet conditions?The knob is enlarged in a wing-style shape, which is intended to be easier to grip and adjust, including when hands are wet or gloved.
Can I use this mount for a second device on another part of my boat?Yes, the adjustability and mounting plate approach make it suitable for relocating electronics on multiple locations, as long as your second device also matches the compatibility requirements.
Specifications
| Product Title | VAUBORTTI Aluminum Fish Finder Mount, Marine Electronic Mount for Boat, C Size 1.5" Ball with T-Bolt Track Base, Compatible with Garmin, Lowrance, Raymarine, for RAM Systems |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | VAUBORTTI |
| Manufacturer | VAUBORTTI |
| Model Name | Aluminum Fish Finder Mount |
| Model Number | 8f1812c5-4e4d-48cf-89aa-3984c4870dff |
| Compatible Devices | Fish finders, Marine GPS, CB Radios, Ham Radios,Chartplotter, Gimbal Brackets |
| Compatible Phone Models | Garmin, Lowrance, Humminbird, Raymarine and more |
| Mounting Type | Rail Track Mount |
| Additional Features | One-Piece Die-Cast Aluminum, Oversized Wingnut Grip, T-Bolt Track Ball for Rail Tracks, TPU Injection-Molded Ball |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Boat, Kayak |
| Unit Count | 1.0 Count |
| Enclosure Material | Aluminum |
| Warranty Description | 2 Year |
| Built-In Media | Fish Finder Mount, T-Bolt Track Ball Mount |
| Special Feature | One-Piece Die-Cast Aluminum, Oversized Wingnut Grip, T-Bolt Track Ball for Rail Tracks, TPU Injection-Molded Ball One-Piece Die-Cast Aluminum, Oversized Wingnut Grip, T-Bolt Track Ball for Rail Tracks, TPU Injection-Molded Ball See more |
Recommended next
MotorGuide 8M0092071 Xi Series Pinpoint GPS Navigation Remote Replacement — For Xi3 and Xi5 Trolling Motors Includes Lanyard
The MotorGuide 8M0092071 Xi series Pinpoint GPS navigation remote is a targeted replacement remote for Xi3 and Xi5 trolling motors, adding convenient steering and anchoring controls plus GPS features like heading lock, jog, and route record/playback. It’s a straightforward swap for anglers who need their remote back in action, but it only fits the Xi3/Xi5 ecosystem and uses two AAA batteries.
Minn Kota 1866550 Bluetooth i-Pilot System Remote
The Minn Kota 1866550 Bluetooth i-Pilot System Remote adds a practical second control point for Bluetooth-enabled i-Pilot setups. It’s built for everyday deck use with a larger LCD, instant status feedback, and an easy battery compartment, but it only works with i-Pilot systems that support Bluetooth (2017+), so compatibility matters.
NMEA 2000 (N2K) 1 Meter (3ft 3 inches), Backbone, Drop or Extension Cable for Lowrance Simrad B&G Navico & Garmin Networks
A 1-meter NMEA 2000 backbone/drop/extension cable with 5-pin, gold-plated connectors and shielded cabling to help extend your existing network. Buyers generally report it’s plug-and-play for Lowrance and other NMEA 2000 units, with solid fit and reliable connections, though it’s a short run meant for specific cable-routing needs.
RAM MOUNTS Fish Finder Mount for Boats, Marine Electronics Drill-Down Mount with Medium Arm and AMPS Plate, Universal RAM-B-111U
The RAM-B-111U drill-down fish finder mount is built for boats that need a stable, adjustable hold for Garmin and compatible fish finders. It uses RAM’s ball-and-socket design for easy aiming, with a power-coated marine aluminum build and a stated maximum 6 lb device capacity, but it may require extra hardware for a perfect device fit.