USX MOUNT Universal Soundbar Mount, Sound Bar TV Bracket for review
Quick take
The USX MOUNT Universal Soundbar Mount is a wall-mount bracket built to hold a wide range of soundbars (up to 17.6 lbs) using an adjustable holder that extends from about 3.46 in to 6.06 in. It’s a strong option if you want a cleaner installation style with a removable no-slip base and included hardware for different setups, but buyers with unusual TV or soundbar clearance needs may have to modify fit.
Pros and cons
Pros
- Adjustable extendable holder (3.46 in to 6.06 in) helps match spacing needs.
- Removable no-slip base holder helps keep the soundbar seated securely.
- Includes nuts and bolts for different VESA-related mounting situations, reducing extra-hardware hunting.
- Two installation options for different soundbar lengths and TV setups.
Cons
- Compatibility depends on TV VESA distance and soundbar width limits (up to 6.06 in width for the audio system).
- Some combinations may require on-site adjustments, especially when clearance interferes with an existing TV mount or soundbar hardware.
What buyers think
Buyer-review evidence points to a consistent theme: the mount is considered sturdy once installed, with an adjustable design that makes alignment easier. Many buyers specifically mention that installation feels straightforward, helped by included hardware for multiple mounting needs. Another recurring point is the mount’s value, with reviewers describing it as a practical choice for getting a secure, clean-looking soundbar setup. Review evidence is more limited on long-term performance, but the available comments broadly support reliability for everyday use.
Who this soundbar mount is best for
- Buyers with a typical TV-to-soundbar spacing problem: If you need flexibility between roughly 3.46 in and 6.06 in, the extendable holder is designed for that range.
- People who want a cleaner look: Reviews highlight that the layout can avoid obvious mounting points between the TV and soundbar (though this depends on your specific gear).
- DIY installers who prefer included hardware: Multiple reviewers mention the included nuts and bolts made setup smoother across different configurations.
- Soundbars that can use top/bottom mount points (or no-hole designs): The bracket is designed to accommodate soundbars with holes or without holes, based on the intended attachment method.
Key compatibility and fit details to check first
TV and spacing constraints
- TV distance range: The mount is intended for most TVs within a horizontal distance range from about 150 mm (min) to 600 mm (max).
- VESA considerations: Hardware behavior is tied to TV VESA sizing, with notes suggesting support for VESA up to 400 x 400 mm for the shorter installation method.
Soundbar weight and size limits
- Max supported soundbar weight: 17.6 lbs.
- Soundbar width limit: The audio system width should not exceed 6.06 inches.
Installation experience (and what can go wrong)
Buyers commonly report that installation is easy, and the hardware comes in pre-labeled bags to speed up setup. The mount can be secured with the described approach for above-TV mounting that uses a single screw for fixing. It also uses safety bolts to lock the extendable holder, and the holder can be removed by adjusting those safety bolts.
If you already have a specialized TV mount or your soundbar’s mounting scheme is highly specific, plan for potential “measure twice” time and be ready to adjust the installation rather than assume it will drop in perfectly.
Pros and cons you can feel after installation
When it works well
- Your soundbar sits securely thanks to the no-slip base approach, with buyers describing a solid feel once mounted.
- The adjustable holder makes it easier to dial in spacing for better visual alignment (and, for some setups, functional positioning).
- The “universal” concept is supported by the included hardware variety, which reduces the friction of matching bolts to your exact setup.
When you might want to look elsewhere
- If your soundbar is wider than about 6.06 inches, this bracket is unlikely to fit within its intended constraints.
- If your TV mount hardware creates interference, you may need extra steps or modifications. In those cases, you may prefer a mount specifically designed around your soundbar and TV model pairing.
Verdict: is it worth buying?
The USX MOUNT Universal Soundbar Mount is a strong value-focused choice for shoppers who want a secure, adjustable wall bracket that fits a broad range of TV spacing and soundbar styles, with hardware included to simplify setup. It’s especially appealing if you’re trying to achieve a tidy look without obvious mounting clutter. The main reason to hesitate is that universal fit can still run into clearance and hole-alignment issues with certain TV mounts and soundbars, so compatibility measurements matter.
Alternatives to consider (based on what you care about)
- If appearance matters most: Look for mounts designed to minimize visible mounting hardware between the TV and soundbar, but verify your specific soundbar mounting pattern and spacing.
- If your setup is unusual: Consider a soundbar mount with more model-specific compatibility or broader adjustability, especially if your TV has special clearance constraints.
- If you’re weight-conscious: Confirm your soundbar’s weight stays under the stated 17.6 lb limit before choosing a mount.
FAQ
What soundbar size and weight does this mount support?
It’s rated to hold soundbars up to 17.6 lbs, and the audio system width should not exceed 6.06 inches. It also uses an adjustable holder designed to extend from about 3.46 in to 6.06 in.
Will it work with TVs that have different VESA sizes?
The mount is intended for most TVs within a horizontal max/min range (about 600 mm max and 150 mm min). It includes hardware intended to support different mounting situations, and installation notes reference compatibility for setups up to 400 x 400 mm for the shorter method.
Is the install difficult?
Many buyers describe installation as easy, and the mount includes all listed hardware in pre-labeled bags.
Does it work with soundbars with holes or without holes?
The bracket is designed to hold soundbars with holes or without holes, using the intended mounting approach for your soundbar model.
Can the holder be removed after mounting?
Yes. The mount uses safety bolts to lock the extendable holder, and the holder can be removed by adjusting those safety bolts.
Specifications
| Product Title | USX MOUNT Universal Soundbar Mount, Sound Bar TV Bracket for Soundbar with Speaker, Fits 2 Installation Options, Removable No-Slip Base Holder Extends 3.46”-6.06” |
|---|---|
| Category | Electronics > Accessories & Supplies > Mounts > Speaker Mounts |
| Brand | USX MOUNT |
| Manufacturer | X-MOUNT LIMITED |
| Model Number | XAS002 |
| Color | Black |
| Material | Alloy Steel |
| Brand Name | USX MOUNT |
| UPC | 782855533703 |
| Manufacturer Part Number | XAS002 |
| Item Dimensions | 27.19 x 18.27 x 3.43 inches |
| Material Type | Alloy Steel |
| Mounting Type | Wall Mount |
| Item dimensions L x W x H | 27.19 x 18.27 x 3.43 inches |
Available variants
Size
- Soundbar Mount up to 13 lbs
- Soundbar Mount up to 30 lbs
- Soundbar Mount up to 13.2 lbs
- Soundbar Mount up to 16 lbs
Recommended next
VANMASS Car Dashboard Phone Holder Universal Powerful Suction Cup Mount, Dash Windshield Air Vent Truck Stand Compatible with All Phones Black
The VANMASS Version 6.0 car phone mount is a universal suction-cup style holder with a removable vent clip, designed to fit most 4 to 7 inch phones (including with cases up to a certain thickness). It focuses on grip (adjustable feet, shockproof silicone contact points, and non-slip side texture) and wide viewing flexibility via multi-angle adjustments. The main caveat is that suction performance depends on your dashboard or windshield surface, and the manufacturer notes leather dashboards are not suitable.
Mounting Dream Soundbar Mount Bracket for Mounting Above or Under TV (MD5420)
The Mounting Dream MD5420 is an alloy-steel soundbar bracket designed to mount a soundbar above or below your TV, with detachable extension plates for extra positioning flexibility. It supports many TV VESA patterns up to 600x400mm and soundbars up to 15 lb, but sizing compatibility (including TV size limits) and hole spacing still matter.
WALI Outlet Shelf Wall Holder, Bathroom Shelf up to 10lbs
The WALI Outlet Shelf Wall Holder is an outlet-cover shelf that adds counter space while keeping a powered device tidy with built-in cord management. It installs over compatible standard vertical duplex/decorator wall outlets and supports items up to 10 lbs, making it a practical add-on for bathrooms, kitchens, bedrooms, dorms, and garages. The main catch is outlet compatibility, so double-check you have the right plate type before buying.
Perlegear Soundbar Mount with Adjustable Height, Sound bar Mount up review
The Perlegear Soundbar Mount PGSM04B is a wall-style soundbar bracket designed to support up to 15 lbs and fine-tune the gap between your TV and soundbar. It offers adjustable height using tool-free knobs and can be installed above or below the screen, but you need to match your soundbar’s screw/bolt pattern (M4x16, M5x16, M6x16 or keyhole bolts) and ensure enough clearance for the under-TV setup.