UPGRAVITY Monitor and Laptop Mount, Monitor Arm with Vented Tray
Quick take
The UPGRAVITY monitor and laptop mount is designed for dual-screen desk setups, pairing a full-motion monitor arm with a vented tray that holds a laptop. It is a solid pick if you want adjustable viewing and typing angles and a cleaner desk layout, using either a clamp or grommet installation. The main thing to watch is setup sensitivity, since a few buyers mention needing to properly tighten the joints to reduce sag or minor misalignment.
Pros and cons
Pros
- Full-motion positioning (height adjust, tilt, swivel, and rotation) for finding comfortable angles.
- Vented laptop tray supports laptop sizes up to 17 inches (tray dimensions provided) for a dual-screen workflow.
- Cable management built into the center pole with detachable clips to help keep wires organized.
- Multiple mounting plate options, including VESA compatibility for common 75x75mm and 100x100mm hole patterns.
Cons
- Clamp installation may require extra support if your desk underside design limits gripping.
- Some buyers report the arm can sag or sit slightly off if joints are not tightened or positioned carefully.
What buyers think
Buyer feedback is broadly positive on build quality, stability, and how much the mount tidies up a desk. Several comments highlight straightforward assembly and the mount feeling sturdy once installed. A recurring theme is flexibility, with buyers appreciating the ability to position the monitor easily and use the tray for day-to-day laptop work. On the downside, the most mentioned friction points are installation fit (particularly clamp gripping depending on desk structure) and the need to adjust/tighten joints to limit sag or minor tilt.
What this mount is for
This is a monitor arm with an integrated laptop tray aimed at people who regularly switch between a laptop and an external display. Instead of placing the laptop on the desk, the tray lifts it into your work zone and helps you keep both screens within a consistent viewing range. With the arm’s motion range, it is also meant to support different orientations (portrait or landscape) depending on what you are doing.
Key features that matter for everyday use
Universal compatibility (and its limits)
The monitor side is designed to work with 13 to 27 inch LCD monitors up to 17.6 lbs. For laptop support, the vented tray’s measurements (11.8 inches long by 10.4 inches wide) target laptops up to 17 inches. The monitor plates are detachable and compatible with VESA mounting hole patterns of 75x75mm and 100x100mm, which is a major checklist item before you buy.
Adjustability for comfort
The arm is height adjustable and allows 90 degrees tilt, 180 degrees swivel, and 360 degrees rotation. That feature set is useful if you want to alternate between viewing the monitor for long stretches of reading and repositioning it quickly for presentations, typing, or sharing your screen. The ability to set the monitor in portrait or landscape can also help with document work and narrower layouts.
Desk space and cable management
By moving the monitor off the desk surface, the mount frees up space for other accessories. It includes both a C-clamp and a grommet mounting kit, giving you options depending on your desk edge. There is also an integrated cable management system on the center pole, plus detachable cable clips to help keep AV and power cords from tangling in front of the arm.
Pros and cons, in plain terms
Pros
- Better desk layout for dual-screen work: monitor on an arm, laptop on a dedicated vented tray.
- Flexible positioning: multiple motion axes make it easier to tune viewing and typing angles.
- Helps keep cables tidy: the center-pole routing and clips reduce visible clutter.
- Works with common VESA sizes: 75x75mm and 100x100mm hole patterns.
Cons
- Clamp fit can be desk-dependent: if your desk’s underside prevents the clamp from gripping, you may need to use the grommet kit or add a small helper (as some buyers describe).
- Expect some setup dialing-in: a few buyers mention sag or slight misalignment that can require re-tightening joints and careful positioning.
Who should buy this
- You run a laptop and external monitor together and want them positioned more ergonomically without stacking everything on the desk.
- You want a single adjustable setup that can handle both viewing and typing angles, including portrait orientation.
- Your monitor has VESA 75x75mm or 100x100mm mounting holes, and you’re within the weight limit (up to 17.6 lbs for the monitor).
- You value cable organization and want the arm to help reduce wire clutter.
Who should skip it
- Your laptop is larger than 17 inches or does not fit the tray’s 11.8 inch by 10.4 inch dimensions.
- Your monitor is heavier than 17.6 lbs or uses a VESA pattern outside 75x75mm and 100x100mm.
- Your desk setup makes clamp mounting difficult, and you would prefer a design that does not require careful installation choices.
Verdict
The UPGRAVITY monitor and laptop mount is a strong option for people building a cleaner, more ergonomic dual-screen desk. It offers the motion and organization features you typically want in a monitor arm, plus a vented laptop tray for laptop-first workflows. Just be prepared to double-check compatibility (VESA pattern, monitor weight, and laptop tray dimensions) and to spend a little extra time tuning the joints so the setup sits the way you expect.
FAQ
Does the monitor mount support VESA 75x75 and 100x100?
Yes. The monitor plates are compatible with VESA mounting holes of 75x75mm and 100x100mm.
What size laptop will fit on the vented tray?
The vented tray is sized to fit laptops up to 17 inches. The tray dimensions are 11.8 inches long by 10.4 inches wide.
How is this mount installed on the desk?
It comes with both a C-clamp and a grommet mounting kit, so you can choose the installation method that matches your desk.
Is the monitor arm adjustable enough for different viewing positions?
It is. The arm is height adjustable and supports 90 degrees tilt, 180 degrees swivel, and 360 degrees rotation, allowing portrait or landscape positioning.
What is the maximum monitor weight and screen size it supports?
It supports most 13 to 27 inch LCD computer screens up to 17.6 lbs.
Are there any common setup issues to be aware of?
Buyer feedback suggests that clamp mounting can be affected by desk underside design, and that fine-tuning the joints may be needed to minimize sag or slight misalignment after installation.
Specifications
| Product Title | UPGRAVITY Monitor and Laptop Mount, Monitor Arm with Vented Tray for 13" to 27" LCD Computer Screens and Notebook up to 17 inch, Fully Adjustable Laptop Mount Stand Holds up to 17.6lbs |
|---|---|
| Category | Electronics > Computers & Accessories > Laptop Accessories > Mounts |
| Brand | UPGRAVITY |
| Manufacturer | UPGRAVITY |
| Item Weight | 9 Pounds |
| Color | Black |
| Form Factor | Gimbal |
| Compatible Devices | Laptops |
| Compatible Phone Models | LG |
| Mounting Type | Tabletop |
| Other Special Features of the Product | Adjustable, Ergonomic, Swivel |
| Antenna Location | Desk |
| Adjustable Length | Yes |
| Fastening Type | Clip Holder |
| Style Name | monitor & laptop |
| Number of Items | 1 |
| UPC | 756166874039 |
| Enclosure Material | Alloy Steel |
| Finish | Powder Coated |
Recommended next
HUANUO Adjustable Monitor Stand, Single Arm Desk Mount for 32 review
The HUANUO single-arm desk mount is built for tidy setups where you want both a 13–32 inch monitor and a 14 x 12 inch ventilated laptop tray on one adjustable arm. It emphasizes desk clearance, cable organization, and smooth tilt and rotation, but height changes on the arm require an Allen wrench, and monitor stability depends on your monitor weight, fit, and mounting tightness.
BESIGN LS03 Aluminum Laptop Stand, Ergonomic Detachable Computer Stand, Notebook Riser, Laptop Mount
The BESIGN LS03 is a slim aluminum laptop riser for 10 to 15.6-inch notebooks that folds flat and assembles in a few steps. It aims to lift your screen to a more comfortable viewing angle, while its open aluminum design supports better airflow and its rubber contact points help protect your device.
HUANUO Laptop Desk Mount (17” to 32” monitor arm)
The HUANUO 2-in-1 laptop/monitor desk mount uses a ventilated tray and an adjustable arm to clear desk space and bring screens closer to eye level. It’s built around a 22 lb capacity, VESA support (75x75 and 100x100), and flexible tilt/swivel/rotation, with C-clamp or grommet mounting. The main caveat is setup needs a screwdriver (and your desk thickness must fit the clamp or grommet range).
VIVO Single Laptop Notebook Desk Mount Stand, Fully Adjustable Extension with C-clamp (STAND-V001L)
The VIVO STAND-V001L is a ventilated single-laptop desk stand that frees up desk space and lets you raise, tilt, and swivel a 17-inch laptop using a drill-free clamp or grommet-style mounting. It’s generally described as sturdy and easy to assemble, but some setups can reveal fit-and-finish quirks like minor play in the tray platform if assembly or alignment is off.