Updated Soft Silicone Camera Eyepiece Eyecup for Sony A7III A7II A9 A7S A99II A58 A7 A7R IV A7RIII A7SII
Quick take
This is a replacement eyecup set for compatible Sony mirrorless cameras, built around a soft silicone eyepiece for comfort and help blocking stray light. It also includes matching hot-shoe covers for added protection, making it a practical “keep spares on hand” option, though it is not presented as OEM and fit feel can vary from original parts.
Pros and cons
Pros
- Soft silicone eyecup designed for comfort at the viewfinder
- Compatible with a wide range of Sony bodies in the A7/A9/A99 II and related lines listed
- Includes hot-shoe covers to help protect the camera’s shoe area from dust and moisture
- Buyers often describe the replacements as fitting well and being affordable for having spares
Cons
- Not OEM branding, and some buyers note differences in clip/fit compared with original parts
- Eyecup feel (how “snug” or responsive it sits) may not match factory pieces
What buyers think
Buyer-review evidence is limited to a small set of snippets, but several themes show up that matter for this accessory: fit and replacement value, and whether the parts match original feel. Multiple buyers report the eyecups fit their cameras well and were easy replacements, with at least one mention of having spare replacements ready after wear. There is also at least one report of a mismatch versus OEM-style clips or feel, suggesting small variation between pieces (for example, clip condition and how smoothly the silicone part settles). Overall, the fit appears workable for many Sony users, but if you want exact OEM identity and behavior, you may want to double-check compatibility and be ready for some non-OEM differences.
What it is and who it’s for
This set targets a common wear-and-tear problem on viewfinder cameras: the eyecup gets slick, flattened, or uncomfortable over time, and glare from off-axis light can become more noticeable. The soft silicone eyecup is intended to sit against your face comfortably while helping reduce unwanted light during shooting. The included hot-shoe covers add a simple layer of protection to the camera’s accessory mount, helping keep dust and moisture away when you are not using mounted gear.
Compatibility and key specs to check before you buy
Eyecup compatibility
The eyecup is described as compatible with a long list of Sony models including (among others) A9, A99 II, A7 (and variants), A7R (and variants), A7S (and variants), A58, and A7R IV. It is also described as a replacement for Sony FDA-EP18. If your camera is in the listed group, you are likely in the right neighborhood for fit.
Hot-shoe cover compatibility
The hot-shoe covers are listed as compatible with a broader set that includes Sony A6000 through A6600, A3000 and A3500, A58, ZV1, A7C, A1, and several additional Sony models. Because shoe shapes and access can differ across lines, it’s still smart to cross-check that your specific body is covered by the compatibility list.
Pros and cons in real buying terms
When this set makes sense
- You want an affordable replacement eyecup set rather than paying for factory parts.
- You are replacing a worn eyecup and want a softer, more comfortable contact area for your shooting routine.
- You want extra spares, since having two eyecups and two hot-shoe covers can reduce downtime when one wears out.
Where you should be cautious
- If you are sensitive to how the clips engage and how closely the part matches OEM behavior, review-fit issues can happen. Some buyers report non-OEM differences and varying clip outcomes.
- If you are using the camera’s viewfinder for long sessions and you hate any change in how the eyecup feels at your face, be prepared for a break-in or a slight difference from the original.
Alternatives to consider
If you want a similar goal, but different priorities, consider these approaches:
- OEM replacement eyecups: Best if you need exact branding, exact clip behavior, and the closest match to how your original eyecup feels.
- Aftermarket eyecups with a different material: If silicone feel is not for you, some sellers offer alternative firmness or texture, though compatibility will vary by camera model.
- Just the hot-shoe protection: If your eyecup is still fine but your accessory mount stays exposed, focusing only on shoe protection can be a simpler, less expensive fix.
Verdict
The Updated Soft Silicone Camera Eyepiece Eyecup set is a solid budget option for Sony A7/A9/A99 II series owners who need an eyecup replacement and want a comfortable, silicone contact point. It also adds practical protection for the hot-shoe area. The main tradeoff is that it is not positioned as OEM, and fit or feel can differ slightly from factory parts, so buyers who demand exact OEM matching should be more cautious.
FAQ
Is this eyecup compatible with Sony A7III and A7II?
It is listed as compatible with Sony A7III and A7II, along with multiple other Sony A7 and A9 models. Double-check your exact camera model against the compatibility list to confirm fit.
Does it include hot-shoe covers, or is it only the eyecup?
The set includes 2 eyecups and 2 hot-shoe covers, intended to protect both the viewfinder area and the hot-shoe accessory mount when not in use.
Will it feel exactly like the original OEM eyecup?
Because it is an aftermarket replacement, the look and how the clips sit can differ from original parts. Some buyers report good fit, while others mention non-OEM differences in clip or feel, so exact matching is not guaranteed.
What protection does the hot-shoe cover provide?
The hot-shoe covers are designed to help prevent dust and moisture intrusion and reduce the chance of scratching around the shoe area when accessories are not attached.
Is it a good buy if I go through eyecups quickly?
It can be a practical choice if you want spare replacements on hand. The inclusion of two eyecups helps reduce downtime if your eyecup wears out or gets damaged.
Specifications
| Product Title | Updated Soft Silicone Camera Eyepiece Eyecup for Sony A7III A7II A9 A7S A99II A58 A7 A7R IV A7RIII A7SII, 2Pack Camera Hot Shoe Cover for Sony + 2Pack Camera Eye Cup Replacement for Sony |
|---|---|
| Category | Electronics > Camera & Photo > Accessories > Viewfinders |
| Manufacturer | ChromLives |
| Item Weight | 0.317 ounces |
| Product Dimensions | 1.38 x 0.47 x 0.47 inches |
Available variants
Color
- EP-18
- EF
Recommended next
Hoodman H32MB HoodLoupe Camera Viewfinder Loupe 3.2 inch LCD Sun Shade
The Hoodman H32MB HoodLoupe is a neck-worn optical loupe designed to reduce LCD glare outdoors and make it easier to check focus, composition, and histograms. It offers +/- 3 diopter adjustment and glass optics, with a modular base system for different LCD sizes, but it can be a pricier add-on if you only occasionally shoot in harsh sun.
A6700 Eyecup Eyepiece, Soft Silicon Extended Camera Eye Cup Viewfinder review
The A6700 Eyecup Eyepiece is a soft silicone, extended eyecup replacement for the Sony A6700 (intended to replace Sony FDA-EP20). It aims to improve comfort at the eye, reduce stray light and glare in bright conditions, and help limit accidental contact with the LCD screen. The main caveat is that some buyers report the fit relies on pressure and may not feel as secure for everyone, especially during active use.
Kiwifotos Long Soft Viewfinder Eyecup Eyepiece for Canon EOS 90D
The Kiwifotos long soft viewfinder eyecup replaces the stock Canon eyecup with a deeper, slide-on silicone accessory designed to block stray light and make eye placement more comfortable, including for glasses wearers. It is a good fit option for many Canon EOS models listed, with the main caveat that some clip security can be less robust if you force the camera into tight spaces.
EOS R6 Mark II R6 R5 R5C Eyecup Eyepiece, Soft Silicon Extended Camera Eye Cup Viewfinder
An extended, soft-silicone eyecup upgrade for Canon EOS R6 Mark II, R6, R5, and R5C. Buyers report improved comfort and better shading for glasses users, with a practical but fiddly install due to very small screws. If you want more eye relief and help blocking stray light, it can be a worthwhile add-on, as long as you are comfortable doing a careful screw-based swap.