UGREEN Wireless USB C Transmitter and HDMI Receiver Type-C to HDMI 1080P@60Hz 5G Wi-Fi Transmission
Quick take
This UGREEN kit turns a compatible USB-C (DP Alt Mode) source into a wireless HDMI display output using 5.8 GHz Wi-Fi. It targets clean, cable-free setups for TVs and monitors (1080P up to 60 Hz), with an important tradeoff: it is not ideal for fast-moving gaming due to stated latency and potential stutter in some wireless environments.
Pros and cons
Pros
- Wireless 1080P@60Hz support for smooth Full HD video output
- 5.8 GHz Wi-Fi, with up to 164 ft (50 m) range in unobstructed areas
- Plug-and-play pairing (no app, no Bluetooth, no shared Wi-Fi or cellular data needed)
- Transmitter can pass power via USB-C (PD 60W fast charging on compatible chargers/cables)
Cons
- Latency is around 100 ms, so it is better for presentations and viewing than gaming
- Wall-penetration is poor, and performance can drop significantly after going through walls
- Receiver power needs a USB A cable connection
- Real-world reliability may vary depending on local wireless interference (some users report stuttering)
What buyers think
Buyer-review evidence is mixed, but the positive theme is consistent: many people report quick setup and reliable day-to-day use once power is correctly provided. A few reviews emphasize “plugged in and it just worked” behavior and use cases like replacing a wired HDMI run for a projector. At the same time, there is limited but notable feedback about video stutter occurring at regular intervals, even after trying multiple source devices. Overall, buyer-review evidence suggests this product can be straightforward to set up, but wireless conditions can affect smoothness.
How it works and what it is for
This is a wireless video link built around a USB-C transmitter and an HDMI receiver. You connect the transmitter to a USB-C source that supports DP Alt Mode (for example, many modern laptops and some phones/tablets). The receiver plugs into your TV, monitor, or projector via HDMI. Once paired, it sends video and audio over 5.8 GHz Wi-Fi without requiring an app or additional wireless networking on your side.
Video quality and signal behavior
1080P at 60 Hz support
The system is designed for Full HD output up to 1080P@60Hz, with backward compatibility for lower resolutions. For typical classroom slides, meetings, and everyday video, that spec targets a smooth picture without jumping to more complex hardware.
Latency matters for timing-sensitive use
The provided delay is about 100 ms. That is usually fine for watching content and following along during a presentation, but it can feel out of sync for gaming or any scenario where you need tight input-to-output timing.
Range and walls are a key limitation
The maximum distance is rated at 164 ft (50 m) in unobstructed conditions. Wall penetration is described as poor, with significant signal attenuation after passing through walls. In practical terms, if your transmitter and TV are on different rooms or separated by multiple obstacles, expect lower performance than the “open space” range.
Compatibility: what to check before you buy
To use the transmitter, your USB-C device must support DP Alt Mode. The kit is compatible with common desktop and laptop ecosystems (Windows, macOS, and Linux) as well as iOS and Android devices that meet the DP Alt Mode requirement.
- Works with many USB-C devices that support DP protocol over USB-C (DP Alt Mode).
- Receiver side needs an HDMI input display (TV, monitor, projector).
- Receiver power uses a USB A cable (so you will need a power adapter or USB port that can supply it).
Power passing: a useful convenience, with one catch
The transmitter includes a built-in charging chip and supports PD 60W fast charging for compatible USB-C devices. This can help you avoid a separate charger when running the transmitter. The limitation is that the charger plug and charging cable must support PD fast charging protocol, so verify both your adapter and cable are up to the task.
Setup experience and pairing
One of the main reasons buyers choose wireless HDMI kits is simplicity, and this one is positioned as easy to use. It does not require an app or Bluetooth. Pairing happens through the built-in Wi-Fi chip, and there is a documented reset/pairing procedure if you need to re-establish the connection.
Pros and cons for specific buyers
Best for
- Classrooms, meeting rooms, and events where running HDMI cables is inconvenient
- Watching Full HD content on a TV or monitor from a compatible USB-C source
- Setups where you want to reduce cable clutter, especially when you also benefit from USB-C power pass-through
Who should avoid it
- Competitive or high-action gaming, due to the stated latency
- Homes or offices where your transmitter and display are separated by walls or many obstacles
- Buyers who need consistent performance regardless of local wireless interference, since smoothness can vary
Verdict: is it worth it?
The UGREEN wireless USB-C transmitter and HDMI receiver is a strong fit if you have a compatible USB-C device with DP Alt Mode and you want a cleaner, cable-light way to display 1080P video on a TV or monitor. It is likely to work well for presentations and casual viewing, especially in line-of-sight or open areas. If your setup relies on different rooms and multiple walls, or you need near-instant response, you may run into tradeoffs in latency and wireless stability.
FAQ
Does it work with any USB-C port?
No. Your USB-C source must support DP Alt Mode (DP Alt Mode over USB-C). If your USB-C port only supports charging or data but not video output, the transmitter will not function as intended.
What resolution and refresh rate does it support?
It supports up to 1080P at 60 Hz, with compatibility for lower resolutions.
How much delay is there?
The delay is stated to be about 100 ms, which is generally better for viewing and presentations than for gaming or other timing-critical tasks.
How far can it transmit?
It is rated for up to 164 ft (50 m) in unobstructed conditions. Performance can drop significantly after passing through walls, so plan for shorter distances if you need to go through obstacles.
Do I need an app or connect it to my Wi-Fi?
No app is required, and it is designed to pair without using Bluetooth. It also will not occupy your Wi-Fi or cellular data.
Does the transmitter charge my phone?
Yes, it can pass power to a low-power device connected to the transmitter and supports PD 60W fast charging when you use a compatible PD charger plug and cable.
Does the receiver include a battery?
No. The receiver requires USB A power, so you will need an appropriate USB-A power adapter or USB port.
Specifications
| Product Title | UGREEN Wireless USB C Transmitter and HDMI Receiver Type-C to HDMI 1080P@60Hz 5G Wi-Fi Transmission for Video and Audio Output from Phone/Computer/MacBook/Camera/TV Box/DVD to TV/Monitor (164FT/50m) |
|---|---|
| Category | Electronics > Television & Video > AV Receivers & Amplifiers |
| Brand | UGREEN |
| Manufacturer | Ugreen Group Limited |
| Color | grey |
| Material | Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC) |
| Item Weight | 0.3 Kilograms |
| Additional Features | Built-In Wi-Fi |
| Enclosure Material | Acrylonitrile Butadiene Styrene (ABS), Polycarbonate (PC) |
| Includes Remote | No |
| Rechargeable Battery Included | No |
| Voltage | 5 Volts |
| Compatible Devices | Personal Computer |
| Compatibility Options | DVD Player, Laptop, MacBook |
| Hardware Interface | 802.11 ac/b/g/n |
| Connector Type Used on Cable | USB Type C |
| Number of Ports | 2 |
| Control Method | Touch |
| Controller Type | Hand Control |
| Connectivity Technology | Wi-Fi |
| Wireless Compability | 5 GHz Radio Frequency |
| Bluetooth support? | No |
| Warranty Description | 24 Months Warranty Service by UGREEN |
| Built-In Media | HDMI Cable |
| Audio Output Mode | Surround |
| Number of Channels | 2 |
| Special Feature | Built-In Wi-Fi |
Recommended next
Denon AVR-X3900H 9.4 Channel AV Receiver, 105W Power, Dolby Atmos, DTS:X, AURO-3D & IMAX Enhanced
The Denon AVR-X3900H is a feature-rich 9.4-channel AV receiver built for immersive Dolby Atmos-style home theater, plus HEOS whole-home streaming and modern HDMI video support (4K/120Hz and 8K/60Hz, including Dolby Vision). It’s a strong fit for buyers who want room correction and an expandable surround setup, just be aware that some buyers report UI friction and limitations around Bluetooth source vs. Bluetooth transmitter use.
HIDB TV Antenna Amplifier Signal Booster (25dBi, USB Powered)
A USB-powered indoor TV antenna amplifier aimed at improving weak or obstructed over-the-air (OTA) signals. The adjustable gain and built-in cellular (4G LTE) filtering can help reduce pixelation or dropouts for the right signal conditions, but it will not create new stations and may be unnecessary if your local channels are already strong.
Pyle 4 Channel Bluetooth Home Amplifier (PD3000BA)
The Pyle PD3000BA is a 4-channel Bluetooth home amplifier with a front-loading CD/DVD player, FM radio presets, and multiple audio/video inputs. It can be a practical all-in-one choice for casual home theater or light karaoke setups, with a key caveat: real-world reliability and certain feature outputs (like sub-out functionality) have mixed review evidence, so it is worth checking your wiring and expectations before committing.
Flashmen HDMI Booster 2.0, 4K2K 1080P 3D HDMI Amplifier Repeater
The Flashmen HDMI Booster 2.0 is a small, plug-and-play HDMI repeater designed to regenerate an HDMI signal for longer runs, including 4K/60Hz and HDCP 2.2 support. Buyers like the simplicity and improved reliability in some real-world setups, but results depend heavily on cabling and device compatibility.