UGREEN Magnetic Wireless USB C Transmitter and HDMI Receiver 1080P@60Hz
Quick take
This UGREEN kit turns a compatible USB-C laptop, phone, or tablet (DisplayPort Alt Mode) into a wireless source for a TV or monitor, supporting up to 1080p at 60Hz and a claimed range of up to 164 ft. It is designed to be plug-and-play with an internal wireless connection, plus magnetic storage so the pieces stay together. The main caveat is practical latency and reduced range through walls, so it is better for presentations and media than for low-lag gaming or fast back-and-forth interaction.
Pros and cons
Pros
- Up to 1080P@60Hz wireless output for clear Full HD viewing, with backward compatibility for lower resolutions.
- 5.8 GHz wireless transmission with a long-distance claim (up to 164 ft) that can be strong in open spaces.
- Magnetic design helps keep the transmitter and receiver together for carrying and storage.
- Transmitter includes up to 60W USB-C PD charging (requires a PD-capable charger and cable).
Cons
- Latency is non-trivial (about 100 ms), so it is not recommended for mirroring PC games.
- Range can drop when signal passes through walls or obstacles.
- Compatibility depends on your source supporting DisplayPort Alt Mode over USB-C.
- Use-case expectations matter, especially if you need tight lip-sync or ultra-fast response.
What buyers think
Buyer-review evidence is mixed but generally points to an easy setup and a stable wireless connection once it is working. Several shoppers describe the experience as straightforward plug-and-play, with the display appearing quickly and maintaining a clear 1080p feed across a room. Where reviews diverge is around practical limitations, such as the transmitter getting warm during extended use, and occasional timing issues (for example, minor audio delay or lip-sync anomalies) that may be noticeable for some viewing setups. Overall, the review pattern suggests this is a convenient cable-free option that performs best for typical media, classroom, or presentation scenarios rather than demanding real-time interaction.
Key features that matter for real use
1080p at 60Hz wireless video, with a “smooth enough” target
The system supports Full HD visuals up to 1080P@60Hz, which is a good fit for business slides, training videos, and general home viewing. It also supports lower resolutions if needed, which helps when you connect to devices that do not run your chosen output mode at 60Hz.
Wireless range is strong in open spaces, weaker through walls
Transmission is rated for up to 164 ft (50 m) using a 5.8 GHz link. In practice, the strongest results are typically in open areas, because signal attenuation increases after passing through walls and obstacles. If your setup involves different rooms, thick walls, or lots of metal shelving, plan for shorter effective distance than the headline number.
Plug-and-play design, no Wi-Fi or app pairing
Instead of requiring an app, Wi-Fi setup, or Bluetooth pairing, the transmitter and receiver are designed to establish an instant wireless connection when plugged in. That matters if you are setting up for meetings, schools, temporary displays, or any situation where you do not want to troubleshoot networks.
Up to 60W PD charging on the transmitter
The transmitter supports USB-C PD charging up to 60W while you stream, so you can keep a phone, tablet, or laptop powered during use by connecting a compatible charger to the transmitter’s USB-C port. If fast charging is a priority, make sure your charger and cable actually support the PD protocol.
Compatibility depends on USB-C displayport alt mode
This is not a generic “any USB-C port works” adapter. The transmitter is intended for USB-C devices that support DisplayPort protocol (DisplayPort Alt Mode), and it lists compatibility across multiple platforms including Windows, macOS, Linux, iOS, and Android, plus specific device families. If you are unsure whether your USB-C port supports video out, that is the first thing to verify before buying.
Performance and latency: what to expect
This wireless HDMI extender has an indicated delay of approximately 100 ms. That is often workable for media playback, presentations, and viewing content where you are not trying to match real-time audio and motion. It can be a dealbreaker for gaming or situations where you need instant response. Some users also report minor timing differences such as audio delay when routing sound through certain paths, so if lip-sync is critical, plan to test your exact audio setup (external speakers versus TV audio) before assuming it will be perfect.
Pros and cons (buyer fit)
Best for
- Presentations, classrooms, and training rooms where you want less cable clutter.
- TV or monitor setups that need wireless convenience without pairing apps.
- Anyone who wants to stream from a USB-C source that supports DisplayPort Alt Mode.
- Users who want to power the source device via up to 60W PD while transmitting.
Consider other options if
- You need low-latency mirroring for PC gaming or competitive, real-time interaction.
- Your transmitter-to-receiver path goes through multiple walls or obstacle-heavy areas where distance will be heavily constrained.
- You cannot confirm your USB-C port supports DisplayPort Alt Mode.
- You are extremely sensitive to audio delay or lip-sync accuracy.
Verdict
UGREEN’s magnetic wireless USB-C transmitter and HDMI receiver is a practical solution for cable-free Full HD streaming to TVs and monitors, especially for meetings, education, and everyday media where setup simplicity matters. If you can use a DisplayPort Alt Mode USB-C source, run in an environment with reasonable line of sight, and accept the listed latency, it can be a clean upgrade from dragging HDMI cables around. If you want near-zero delay or you are often transmitting through walls, you will likely be happier with a wired HDMI approach or a different wireless solution designed for lower latency.
Price and availability
Check the latest pricing and stock status before you buy, since this type of accessory can vary based on retailer promotions.
FAQ
Does this work with any USB-C port?
No. The transmitter is intended for USB-C devices that support DisplayPort Alt Mode (DisplayPort protocol over USB-C). If your USB-C port does not support video output via DisplayPort Alt Mode, it will not function as a wireless video source.
What video quality and refresh rate can I expect?
It supports up to 1080P at 60Hz, with backward compatibility for lower resolutions if your source device uses a different output mode.
How far can it transmit?
The wireless link is rated up to 164 ft (50 m), using a 5.8 GHz connection. Actual range can be lower when the signal passes through walls or obstacles, so open spaces generally perform better.
Is there noticeable lag?
Yes. The system has an indicated delay of about 100 ms. It is not recommended for mirroring PC games or other low-latency needs.
Can I charge my phone or laptop while streaming?
Yes. The transmitter supports USB-C PD charging up to 60W, but you need a PD-capable charger and cable to achieve optimal charging performance.
Do I need an app or Wi-Fi setup?
No. It is designed to work as plug-and-play, establishing a wireless connection without requiring app installation, Bluetooth pairing, or Wi-Fi configuration.
What TV or monitor connections does the receiver use?
The receiver is designed to connect to HDMI port display devices like TVs, monitors, and projectors.
Specifications
| Product Title | UGREEN Magnetic Wireless USB C Transmitter and HDMI Receiver 1080P@60Hz Plug & Play 5G Transmission for Video and Audio Output for iPhone/PC/MacBook/Camera/Laptop/Tablet to TV/Monitor (164FT/50m) |
|---|---|
| Category | Electronics > Television & Video > AV Receivers & Amplifiers |
| Brand | UGREEN |
| Manufacturer | Ugreen Group Limited |
| Color | Space Gray |
| Item Weight | 90 Grams |
| Additional Features | Compact Design, Magnetic |
| Includes Remote | No |
| Warranty Description | 24 Months Warranty Service by UGREEN |
| Built-In Media | HDMI Cable |
| Connectivity Technology | HDMI, USB, Wi-Fi |
| Wireless Compability | 5 GHz Radio Frequency, 802.11a/b/g/n |
| Bluetooth support? | No |
| Rechargeable Battery Included | No |
| Compatible Devices | Desktop, Laptop, Personal Computer, Smartphone, Television |
| Hardware Interface | 802.11 ac/b/g/n |
| Connector Type Used on Cable | HDMI, USB Type C |
| Controller Type | Hand Control |
| Audio Output Mode | Surround |
| Number of Channels | 2 |
| Special Feature | Compact Design, Magnetic |
Recommended next
Denon AVR-X3900H 9.4 Channel AV Receiver, 105W Power, Dolby Atmos, DTS:X, AURO-3D & IMAX Enhanced
The Denon AVR-X3900H is a feature-rich 9.4-channel AV receiver built for immersive Dolby Atmos-style home theater, plus HEOS whole-home streaming and modern HDMI video support (4K/120Hz and 8K/60Hz, including Dolby Vision). It’s a strong fit for buyers who want room correction and an expandable surround setup, just be aware that some buyers report UI friction and limitations around Bluetooth source vs. Bluetooth transmitter use.
Sony XAV-AX3700 7-Inch Multimedia Receiver with Apple CarPlay & Maestro
The Sony XAV-AX3700 is a 7-inch, touchscreen multimedia receiver built for simple, day-to-day in-car control. It pairs Apple CarPlay with Bluetooth (including LDAC), adds a 14-band EQ and time alignment for sound tuning, and supports camera input, making it a practical fit for many double-DIN dash setups, with one notable caveat: CarPlay can occasionally freeze in certain reverse-camera timing situations.
RX Only, Wireless HDMI Extender Receiver, Up to 1 TX to 4 RX Connections (Vrriis)
This RX-only wireless HDMI extender receiver lets you add another TV or monitor to an existing wireless HDMI transmitter setup. It supports up to 1 TX feeding as many as 4 RX units (with shorter range as you add receivers), includes IR pass-back for remote control, and is designed for Full HD up to 1080p. Main caveat: it requires pairing with a compatible transmitter, and range drops when walls and other obstacles are involved.
EVATEK Wireless HDMI Transmitter and Receiver 328FT/100M, 4K Decode 1080P Output Wireless
EVATEK’s wireless HDMI transmitter and receiver kit is designed for plug-and-play mirroring from HDMI sources to a TV, projector, or monitor, with claimed long-range wireless performance (up to 328 ft / 100 m) and 4K decoding with 1080p output at up to 60Hz. It’s a good fit for meeting rooms, classrooms, and travel, but it mirrors the source display and is not intended for ultra-low-latency competitive gaming.