UAYESOK Small VHF Marine Antenna 159V Stubby Boat Antenna W/16.4ft RG-58 coaxial Cable
Quick take
This stubby VHF marine antenna is built for the 156–163 MHz marine band and comes with a 16.4 ft low-loss RG-58 coax cable and an L-mount bracket for side or mast installs. It is a practical pick when you want a shorter antenna that is easier to mount on smaller boats or where a long whip antenna is inconvenient. The main tradeoff with any stubby design is range and line-of-sight performance can be limited compared to taller antennas.
Pros and cons
Pros
- Marine-band frequency coverage (156–163 MHz) with 50 ohm impedance
- Pretuned for marine VHF use, intended to improve reception and communication
- Includes a 16.4 ft RG-58 coax cable and PL-259 termination for straightforward setup
- Corrosion-resistant stainless L-bracket, suitable for side or mast mounting
- Many buyers mention installation is easy and reception is solid for typical use
Cons
- Stubby antennas can be less effective for longer-distance, beyond-line-of-sight communication
- Expect some drilling and cable routing planning near the entry point
- Compatibility depends on your VHF radio’s antenna connector and intended band
What buyers think
Buyer-review evidence is mixed but useful. Several reviews emphasize that the antenna is straightforward to install and that reception feels good for everyday marine radio use. The included mounting hardware and the included coax/cable assembly come up as helpful for getting installed without hunting down additional parts. A smaller amount of feedback suggests range disappointment when expectations lean toward long-distance, more-than-line-of-sight communication, which is a common limitation for shorter antennas on VHF.
What this antenna is, and who it’s for
The UAYESOK 159V is a compact, “stubby” style VHF marine antenna meant for the marine band (156–163 MHz). It is designed to pair with fixed-mount or handheld marine VHF radios that support marine VHF operation and use a compatible antenna connection. The included coax cable and PL-259 termination make it easier to integrate into an existing VHF radio installation where you want a shorter antenna with a clean, stable mount.
Key specifications that matter for buying
- Frequency range: 156–163 MHz (marine VHF band)
- Impedance: 50 ohms
- VSWR: less than 1.8
- Gain: 2 dBi (not counting the coax cable length)
- Max power input: 50 W
- Height: 164 ± 5 mm
- Termination: PL-259
- Cable: 16.4 ft (5 m) of RG-58 coax
Mounting and installation notes
It uses a stainless L-bracket designed for side or mast mounting, which can be helpful if you want the antenna low-profile but still firmly attached. Installation typically involves drilling near the cable routing entry, since the connector and cable routing need clearance. If you plan to use a grommet at the mounting/drilling points, be ready to adjust hole size so the cable can pass cleanly and protect the coax from abrasion.
Performance expectations: what to consider before you buy
Stubby antennas prioritize compact mounting and easier handling over maximum range. On VHF, communication quality depends strongly on antenna placement and line of sight. If you mainly communicate within the usual working area of your boat, the shorter form factor can be a good balance. If your goal is pushing distance farther than what line-of-sight conditions allow, you may want to compare taller or higher-mounted marine VHF antenna options, since the physical height of the antenna is often a major driver of practical range.
Compatibility and connector fit
This antenna is intended for marine VHF radios in the 156–163 MHz band and uses a PL-259 style termination. The listing highlights compatibility with multiple marine radio brands, but the most important practical question is whether your radio mount and antenna connector are a match. If your fixed mount uses a different connector type, you might need an adapter (or choose a different antenna) to avoid fit issues.
Pros and cons summary
- Choose it if: you want a compact marine VHF antenna for 156–163 MHz, plan a side or mast mount with an included bracket, and value a cleaner, shorter antenna installation.
- Consider alternatives if: you regularly need maximum range and are frustrated by the limits of stubby, low-height antennas on VHF.
Alternatives to consider
If you are comparing options, focus on these categories rather than specific brands. Taller marine VHF antennas (or higher mounts) can improve practical coverage due to increased elevation. If your priority is corrosion resistance and easy mounting, look for marine-rated stainless or corrosion-resistant hardware and a cable assembly that matches your radio’s connector type. Finally, consider cable quality and length, since longer runs and less ideal coax can impact system performance.
Verdict
The UAYESOK 159V stubby VHF marine antenna is a sensible choice for compact boats and installations where a shorter, stable antenna is easier to mount and route cleanly. Reviews point to easy setup and solid reception for typical on-water use. Just temper range expectations, since stubby antennas generally trade long-distance performance for convenience and mounting flexibility.
FAQ
Q: What frequency band is this antenna designed for?A: It is designed for the marine VHF band, 156–163 MHz.
Q: What connector does it use?A: It uses a PL-259 termination, with a 50 ohm coax setup.
Q: Does the package include the coax cable?A: Yes. It includes a 16.4 ft (5 m) RG-58 coaxial cable.
Q: Is a stubby antenna good for long-range communication?A: Stubby antennas are typically better for shorter-to-mid range and line-of-sight communication. If you need maximum range, you may want a taller or higher-mounted antenna design.
Q: What mounting styles are supported?A: The included stainless L-bracket supports side or mast mounting, including horizontal rail or vertical rail mounting orientations.
Q: Is it compatible with my marine VHF radio?A: Compatibility depends on your radio operating in the marine VHF band and matching the antenna connector/termination type. This antenna is intended for marine VHF setups that use the listed PL-259 connection style.
Specifications
| Product Title | UAYESOK Small VHF Marine Antenna 159V Stubby Boat Antenna W/16.4ft RG-58 coaxial Cable, L-Mount Bracket, Easy to Install |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine Antennas |
| Brand | UAYESOK |
| Manufacturer | Quanzhou Hai Mao Wei Communication Co., Limited |
| Model Number | 159V |
| Color | Black |
| AntennaDescription | marine antenna |
| Number of Items | 1 |
| Mfr Part Number | UA-TCBG-2-159V-XPT |
| Warranty Description | 1 year |
| Item Type Name | VHF Marine Antenna |
| Number of Channels | 1 |
| Impedance | 50 Ohms |
| Maximum Range | 16.4 Feet |
| Antenna | marine antenna |
| Number of Packs | 1 |
Recommended next
Tram® Pretuned VHF 3-dBd-Gain Marine Rachet-Mount 46-in. Fiberglass Antenna with RG58 Cable and FME-Female Connector with PL-259 Adapter
The Tram 46-inch pretuned VHF marine antenna is designed for dependable, across-the-marine-band coverage, with a 3 dBd gain fiberglass element and a nylon ratchet mount that can lower for storage or low-bridge situations. It’s a practical choice for buyers who want an easier install with included stainless hardware, a 20 ft RG58 run, and connectors that aim to simplify small-hole routing.
Tram 1600-HC Pretuned 35-Inch VHF Fiberglass Antenna with RG58 Cable and PL-259 Connectors
The Tram 1600-HC is a pretuned, fiberglass marine VHF antenna built around a low-profile, bottom-loaded coil and a 35-inch stainless steel whip. It’s designed for marine-band listening and communication across VHF frequencies, and it ships with RG58 coax plus PL-259 connectors to simplify installation for many boat setups.
Calissa Offshore Tackle Marine VHF Antenna Mount – Adjustable Base Mounts Ratchet for Boat – Made with 316 Stainless Steel Mounts
The Calissa Offshore Tackle marine VHF antenna mount is a 316 stainless steel ratchet-style base designed for standard 1-inch marine antennas. It includes corrosion-resistant hardware and a lever-action laydown handle, with dual swiveling ratchets to accommodate slanted or level surfaces. Best for buyers who want a sturdier, corrosion-resistant alternative to plastic mounts, with a smaller tradeoff being a lighter-feeling handle reported by some.
HYS VHF Marine Antenna Waterproof 3DBI 43.3inch Fiberglass Antennas W/22.9ft(7m) RG58 Low Loss Premium Coaxial Cable with PL259/ Built-in to Nylon Ratchet Mount
The HYS VHF Marine Antenna is a 156 to 163 MHz, 3 dBi vertical fiberglass antenna designed for VHF marine radio reception and transmission. Buyers highlight easy installation, rugged fiberglass performance for boats, and generally solid VSWR and signal results, with the main caveat being fit and mounting expectations if you need a different frequency range or a different style of mounting.