TUSITA Fish Finder Tilt/Swivel Gimbal Mount Bracket and Knobs Compatible
Quick take
This tilt and swivel gimbal mount helps you position compatible Garmin fish finder or chartplotter displays for better viewing from different boat positions. Buyers highlight that it fits properly on their units and provides enough adjustability for use while sitting or standing. The tradeoff to plan for is cable management, since some setups may need extra attention because the package does not include a dedicated lock plate for power and transducer cables.
Pros and cons
Pros
- Built for select Garmin STRIKER, STRIKER Vivid, and ECHOMAP UHD2 models (including 5-inch and 7-inch options).
- Tilt and swivel design makes it easier to dial in viewing angles.
- High-strength composite construction for marine use.
- Includes mounting hardware and knobs, supporting straightforward installation.
Cons
- Cable routing and securing may require additional accessories, since a buyer noted the absence of a dedicated lock plate for power and transducer cables.
- Best fit depends on matching your exact Garmin model and screen size.
What buyers think
Buyer-review evidence is limited, but the available feedback points to two consistent themes: (1) fit and compatibility, with multiple reports that the mount worked well with specific Garmin units, and (2) usefulness of the tilt/swivel adjustment for getting the right viewing angle. Installation also comes up positively, especially when a user is swapping a unit from a dash to a deck or bow position.
Why a tilt/swivel gimbal mount matters on a boat
Fish finder and chartplotter screens can be hard to see clearly when your posture changes, for example when you’re casting from the bow or standing while trolling. A tilt/swivel mount helps you adjust the display angle without having to relocate the entire unit. That can make the screen easier to read in bright conditions and can reduce the need to crane your neck while fishing or navigating.
Compatibility and fit
This mount is designed to work with a range of Garmin fish finder and chartplotter units listed for these series:
- Garmin STRIKER 5cv, 5dv, 7cv, 7dv, 7sv
- Garmin STRIKER Vivid 5cv, 7cv, 7sv (and related compatible Vivid series)
- Garmin ECHOMAP UHD2 5-inch cv and 7-inch cv
Before buying, confirm your exact model number and screen size match one of the compatible options. The mount is not a universal clamp, so a mismatch can lead to an imperfect fit or mounting difficulty.
Design, adjustability, and build quality
The mount uses a high-strength composite construction intended for harsh marine environments. Functionally, it provides both tilt and swivel movement. In practical terms, that means you can set the screen facing you correctly whether you are seated at the console or positioned at the bow.
Installation experience
The package includes the tilt/swivel gimbal mount bracket, knobs, and mounting hardware, which helps reduce the amount of extra shopping needed to get started. As with any deck installation, take time to plan where the cables will run before final tightening.
Pros and cons in real buying terms
Good fit if you want adjustable viewing without relocating your electronics
If your priority is better screen visibility from different positions, this mount’s tilt and swivel approach directly supports that use case. It is also aligned with buyers who are upgrading from a fixed dash position to a more flexible deck or bow setup.
Consider cable management before you commit
Some buyers reported that the kit lacks a dedicated lock-down plate for power and transducer cables. If you prefer a cleaner, more secured cable path, you may need to add your own cable clamping or routing solution to match your boat and installation style.
Price and availability
The product is listed as in stock for the US market at the time of review. If you are price-sensitive, check the current listing for live availability and pricing before placing your order.
Verdict
The TUSITA tilt/swivel gimbal mount is a solid option for Garmin owners who want more flexible viewing angles from a consistent mounting location. It stands out for compatibility with specific Garmin STRIKER, STRIKER Vivid, and ECHOMAP UHD2 models, plus the practical adjustability buyers mention. Just plan ahead for cable securing, since cable lock-down hardware may not be included for every installation setup.
FAQ
Is this mount compatible with my Garmin fish finder?
It’s designed for specific Garmin STRIKER, STRIKER Vivid, and ECHOMAP UHD2 models, including 5-inch and 7-inch options. Double-check your exact model and screen size before purchasing.
Does the kit include the mounting hardware?
Yes. The package includes the gimbal mount bracket, knobs, and mounting hardware.
Can I adjust the screen angle after mounting?
Yes. The mount is built for tilt and swivel adjustment so you can change the viewing angle.
Is cable lock-down hardware included?
A buyer noted that a dedicated lock plate for power and transducer cables was not included, so you may need additional cable management accessories depending on how you route and secure your cables.
Specifications
| Product Title | TUSITA Fish Finder Tilt/Swivel Gimbal Mount Bracket and Knobs Compatible with Garmin Striker 5cv 5dv 7cv 7dv 7sv,Vivid 5cv 7cv 7sv,ECHOMAP UHD2 5" 7" cv 010-12439-01 |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine GPS Accessories |
| Brand | TUSITA |
| Manufacturer | TUSITA |
| Model Name | fd9280b5-63c6-4994-a225-2050d4971b8e |
| Model Number | fd9280b5-63c6-4994-a225-2050d4971b8e |
| Material | High strength composite |
| Item Weight | 0.24 Kilograms |
| Compatible Devices | Garmin STRIKER 5cv 5dv 7cv 7dv 7sv , STRIKER Vivid 5cv 5dv 7cv 7dv 7sv, ECHOMAP UHD2 5" cv, ECHOMAP UHD2 7" cv, ECHOMAP UHD2 5"Ice Fishing Bundle |
| Compatible Phone Models | Garmin STRIKER 5cv 5dv 7cv 7dv 7sv , STRIKER Vivid 5cv 5dv 7cv 7dv 7sv, ECHOMAP UHD2 5" cv, ECHOMAP UHD2 7" cv, ECHOMAP UHD2 5"Ice Fishing Bundle |
| Mounting Type | Swivel Mount |
| Water Resistance Level | Water Resistant |
| Compatible with Vehicle Type | Boat |
| Unit Count | 1.0 Count |
| Enclosure Material | High strength composite |
| Warranty Description | 18 Months Warranty |
| Built-In Media | 1 x Tilt/Swivel Gimbal Mount Bracket, 2 x Knobs, Mounting hardware |
Available variants
Style
- STRIKER Vivid 9sv
- Striker Plus 4,Vivid 4cv
- STRIKER 5cv 5dv 7cv 7dv 7sv
Recommended next
NMEA 2000 (N2k) Pair Male/Female Resistor Terminators. Terminating kit for Lowrance Simrad B&G Navico & Garmin Networks
This NMEA 2000 terminator kit includes one male and one female 120 ohm resistor, meant to terminate each end of an NMEA 2000 backbone. Buyers report an exact fit and dependable operation, with the main caveat being correct installation, using only one terminator pair for the network.
Minn Kota 1866550 Bluetooth i-Pilot System Remote
The Minn Kota 1866550 Bluetooth i-Pilot System Remote adds a practical second control point for Bluetooth-enabled i-Pilot setups. It’s built for everyday deck use with a larger LCD, instant status feedback, and an easy battery compartment, but it only works with i-Pilot systems that support Bluetooth (2017+), so compatibility matters.
Humminbird Ethernet Cable – 5 Ft., AS EC 5E
The Humminbird Ethernet Cable (AS EC 5E) is a Cat 5e, 5-foot Ethernet link designed to connect compatible Humminbird networked units, or connect a control head to a compatible Ethernet switch for sharing sonar and waypoints across your boat. It’s generally praised for reliable communication and solid build quality, with the main caveat being fit and pricing for your specific networking layout (and possible adapter needs for some older systems).
MotorGuide 8M0092071 Xi Series Pinpoint GPS Navigation Remote Replacement — For Xi3 and Xi5 Trolling Motors Includes Lanyard
The MotorGuide 8M0092071 Xi series Pinpoint GPS navigation remote is a targeted replacement remote for Xi3 and Xi5 trolling motors, adding convenient steering and anchoring controls plus GPS features like heading lock, jog, and route record/playback. It’s a straightforward swap for anglers who need their remote back in action, but it only fits the Xi3/Xi5 ecosystem and uses two AAA batteries.