Tram AIS/VHF Marine Antenna, 3dBd Gain, 39" Stainless Steel Whip, 156–162.2MHz Wideband, 150W, 23 ft. RG58 Cable, 1"-24 Thread Mount, Ratchet Mount Included
Quick take
This Tram AIS/VHF marine antenna is designed for marine VHF and AIS use, covering 156–162.2 MHz with a 3 dBd gain 39-inch stainless-steel whip. It’s built to handle up to 150W and includes a 23-foot RG58 cable and marine mounting hardware. The main catch is fit, make sure the 1"-24 mount and the included cable/connectors match your radio setup before ordering.
Pros and cons
Pros
- 3 dBd gain and a 39-inch stainless steel whip for AIS and marine VHF coverage.
- Wideband 156–162.2 MHz range with VSWR less than 1.3:1.
- 150W power handling, with 50 ohm impedance.
- Comes with a long 23-foot RG58 cable and practical mounting hardware (including a ratchet mount).
Cons
- Installation depends on compatibility with the 1"-24 thread marine mount and your cable connection needs.
- Some buyers report rare issues like missing components on arrival, so it helps to inspect contents when it shows up.
What buyers think
Buyer-review evidence is limited but includes a mix of strongly positive experiences and a small number of fulfillment-related complaints. Positive feedback highlights that the antenna can work well for typical on-water communication needs, including reception quality on common channels, and that the antenna length and adjustable mounting can suit smaller boat setups. There are also reviews noting easy installation. One negative theme is not performance-related, it involves missing parts or delivery issues, which suggests buyers should verify the package contents promptly.
Key features that matter for AIS and VHF use
Gain and coverage for typical marine radios
This antenna is built around a 3 dBd gain, 39-inch stainless whip. It’s intended for AIS and VHF wideband operation across 156 MHz to 162.2 MHz, which lines up with the bands many owners care about when they want one antenna solution for AIS plus marine VHF listening and two-way communication.
Impedance, VSWR, and power handling
It’s specified as a 50 ohm antenna with a VSWR under 1.3:1 over the stated range, which generally indicates a good match for VHF radio systems. The rated power handling is 150 watts, making it suitable for higher-power marine communication setups within typical VHF use cases.
Mounting style, cable length, and connectors
The antenna uses a standard 1"-24 thread marine mounting interface, and it includes a nylon ratchet mount that can be laid down. A 23-foot RG58 low-loss cable is included, with an FME-female connector for small-hole installations and a UHF male PL-259 adapter.
Why this matters: if you already have a compatible mount location and you know what connector your radio or existing cabling uses, this kit reduces how much extra sourcing you’ll need.
Who this antenna is best for
- Boat owners running AIS plus VHF: If you want coverage that spans 156–162.2 MHz in a single antenna.
- Buyers who prefer a shorter, manageable whip: At 39 inches for the whip length (with overall height depending on base and mount), it can be a practical alternative to very tall antenna setups.
- People installing with marine-rated mounting: The 1"-24 thread mount and ratchet mount are geared toward standard marine installations and lay-down needs.
- Shoppers who want a longer cable included: The included 23-foot RG58 cable can help when your radio location is not right next to the antenna base.
Who should skip it or double-check first
- If your mount or connector setup doesn’t match: Confirm that the 1"-24 threaded mount and the provided connector options (FME-female and PL-259 adapter) align with your installation plan.
- If you need a different frequency range: This one is focused on 156–162.2 MHz wideband VHF plus AIS. If your primary goal is a different band, you may need a different antenna type.
Pros and cons recap
Pros: 3 dBd gain, 156–162.2 MHz wideband coverage, VSWR under 1.3:1, 150W power handling, and a kit that includes a long RG58 cable plus a ratchet mount. Cons: successful installation depends on mounting and connector compatibility, and while review issues appear fulfillment-related, it’s still smart to inspect the box contents when it arrives.
Price and availability
The current price can vary based on seller and timing. Check the listing for the latest availability and total cost before you commit.
FAQ
Is this antenna suitable for AIS and marine VHF?
Yes, it’s designed for AIS and VHF wideband operation across 156–162.2 MHz.
What is the whip length, and how tall is the antenna overall?
The stainless steel whip is 39 inches. The overall height will depend on the base and the mount hardware used for your installation.
How much power handling does it have?
It’s rated for up to 150 watts.
What cable length is included, and what connectors come with it?
It includes 23 feet of RG58 cable. The cable includes an FME-female connector for small-hole installation, and it also includes a UHF male PL-259 adapter.
What mounting does it use?
It uses a standard 1"-24 thread marine mount, and it comes with a nylon ratchet mount that can be laid down.
Do buyers report performance or reliability problems?
Review evidence is limited, but the recurring positive themes focus on usable reception and easy setup. The main reported issues are not clearly tied to the antenna’s RF performance, they involve missing components on arrival, so it’s wise to inspect contents when delivered.
Specifications
| Product Title | Tram AIS/VHF Marine Antenna, 3dBd Gain, 39" Stainless Steel Whip, 156–162.2MHz Wideband, 150W, 23 ft. RG58 Cable, 1"-24 Thread Mount, Ratchet Mount Included |
|---|---|
| Category | Electronics > Car & Vehicle Electronics > Marine Electronics > Marine Antennas |
| Brand | Tram |
| Manufacturer | transgenomic |
| Model Number | 16763 |
| Color | white |
| Item Weight | 2.1 Pounds |
| AntennaDescription | Radio |
| UPC | 782386064394 765042365233 731215358579 751738413845 796254152809 780320048752 727932013730 |
| Global Trade Identification Number | 00727932013730 |
| Number of Items | 1 |
| Mfr Part Number | 16763 |
| Built-In Media | product |
| Warranty Description | 1 year |
| Item Type Name | two-way antenna |
| Unit Count | 1.0 Count |
| Impedance | 50 Ohms |
| Maximum Range | 1500 Feet |
| Antenna | Radio |
| Number of Packs | 1 |
Recommended next
Waveform DualMini: Low-Profile 2x2 MIMO Window Antenna Kit | Omnidirectional 4G/5G Routers & Hotspots for Netgear M5 & M6, Verizon, AT&T
The Waveform DualMini is a low-profile 2x2 MIMO window antenna kit designed to improve 4G/5G home internet performance by getting your router a stronger, cleaner cellular signal. It is built for shoppers with Verizon or AT&T/T-Mobile compatible gateways and wants an easier “no aiming” installation, with multiple mounting options and a bundled window entry cable.
Marine Tuner/Antenna (SXV300M1) | SiriusXM
The SiriusXM SXV300M1 marine tuner and antenna kit is built for SiriusXM-Ready marine head units, delivering satellite radio on boats even when cell and Wi-Fi are spotty. It pairs a compact tuner with a multi-mount antenna and supports features like pause, rewind, replay up to 60 minutes, TuneStart, and channel-based alerts, with a straightforward one-cable connection. The main caveat is that a SiriusXM subscription is required, and compatibility depends on having a SiriusXM-Ready head unit.
HYS VHF Marine Antenna Low-Profile 156-163MHz with 16.4ft(5m) RG58 Low Loss Premium Coaxial Cable with PL259
The HYS low-profile VHF marine antenna is built for 156 to 163 MHz radios and includes a 16.4 ft (5 m) RG58 low-loss coax cable with PL259. It’s designed for straightforward pole or bracket mounting and aims to improve both transmit and receive for ship-to-shore and similar VHF use, with a key tradeoff being that it’s sized and tuned for VHF specifically.
Shakespeare 4' Centennial VHF Antenna, White
The Shakespeare 4' Centennial VHF Antenna (model 5104) is a compact, 50-ohm marine VHF antenna designed for boats that need a shorter mast height for bridge clearance. Buyers generally report solid reception for near-range use and a generally straightforward install, with the main caveat being that the connector work can be a bit fiddly depending on how you prefer to terminate coax.